IMPACT OF STORES FUNCTION IN PROFITABILITY OF AN ORGANIZATION
ABSTRACT
Stores function is one of the responsibilities any organization. Thereby facilitating the organizational activities. Presently, it has been given status of a department in order to enable it achieve her numerous objectives.
Store functions are major functions for the successful implementation of organization goods. This their perceptions as to the effective and future development of stores functions in the Rokana Industry Nekede.
The study therefore to investigate the prospects and problem of stores functions (A case study of Rookana industry Nekede).
The researcher looked into the proportion of the personnel with appropriate knowledge of the practical stores management philosophy and objective in an organization the stores functions policies and procedures surrounding stores functions management, and the general expectations of prospects of store function management in the Rokana industry.
Questionnaires was contributed and distributed to the relevant staff of the Rokana industry Nekede. The data collected was analyzed and the result should that:
- A supplicant number of the staff demonstrated ignorance of the store function in an organization.
- Most of them are inexperienced in the discipline.
- Most of the staff are interested in st0oring without every belonging to any of the stores function professional bodies to be trained in the job.
Based on the above mentioned discoveries, are following recommendations were suggested.
- In-service training, retraining workshops refresher course and seminars should be organized for the staff of the department.
- Adequate financial assistance be given to the department
- Stores functions responsibility should be fixed with an single department head.
- Experienced qualified staff should be employed
- Storing policies for Rokana Industry Nekede should be made and pass into law under close supervisions.
CHAPTER ONE
1.0 Introduction
In most industries, the activities covering the stores function are spread throughout all in organization. And may also speed to suppliers, customers and the distribution chain. Stores functions on is also a vital part of all industrial organization, public and private utility organization and armed services.
It is s function that is set up in any concern to assist in the production of goods and services and no industrial unit or public undertaking of substantial size can be effective9ly managed without it. The store which can be universally applied to all organizations as their needs vary, but in the course of time, certain principles and practices of more or less general application have been evolved.
The store which is mostly an organization where all types of material needed for production distribution maintenance, packaging etc. are received stored and issued.
The store functions is actually concerned with holding stocks.
1.1 Background of the Study
According to the proprietor of Rokana industries limited Engr. Ugwu when contacted said that the first idea to start that business came into his mind in 1978. he went further by saying that he was battling on how to start off in terms 0of raising fund. He did mention of vicious cycle of poverty which means that an entrepreneur may have idea of a particular business to embark upon but the problem becomes inadequate initial capital to take off.
According to engr. Ugwu, Rokanna industry limited was fully established in 1982 and produce body jelly, tooth brushes, air fresheners, uzzi water and also refilling of gases. The industry employed about 40% cocu raw materials and 60% of foreign inputs. Though they value added process. What the director called value added process.
Population has increased considerably with rampant cases of products of low quality.
1.2 Statement of Problem
The organizations which utilizes the functions of abobve such a federal, state and local government organizations, and armed serves and the private and public and public utilities faces the problem that raise from above functions.
The material products and services were p0rovided at very high and influenced prizes which is not even computable with suitable quality and safety. However, with help of the br9ight prospects and less problems with services selected by the above function.
Store function is necessary in almost every organization from the private household to federal, state and local government as well as industries. These organizations are involved in business transaction at various levels and as such are left to decide if their potentials suppliers are the most reliable economical and trustworthy of those in the market place.
1.3 Objective of the Study
This project is a survey of the problem of products quality control Rokanna industries limited in Owerri. The main objective is to examine the oqresent status of the control of the quality product in this company, so that the strength and weakness and not also the factors affecting development can be determined so as to provide a sound base for a more ositive future approach.
It will help review and store some dominant materials or item, which will help item, produce products at that are satisfactory, adequate dependable and economical. Also it will help the company to realize and achieve the fullest potential of programmes in the company.
It helps in restoring of products that is ready for distribution before the distribution time the finished products.
1.4 Scope of the Study
The area of the study is delimited to restricted to the Rokanna industry Nekede.
This industry is chosen because it is centrally located at Nekede nearby federal Polytechnic Nekede where true study will be easy to carryout. Rokana industry is well known to me, being somebody who live at Nekede, also schooling at Nekede. That is why it is chosen as a case study and not only that, it has been functioning competitively in all its performances. Its products are everywhere in the market which also reach to the demand of people at a low rate.
The industry has been creating employment opportunities to the people as the same time doing its social responsibilities within the Nekeded where it is located.
But the scope of the study is limited to Rokana industry limited. Therefore is to check quality control of incoming materials and components to the manufacturing industries.
1.5 Relevance of the Study
The stores in any organization has wide variety of function that it has performed as efficiently as possible. The way in which store overall efficiency and profitability of the organization.
At the other hand, as with other operations, store keeping is associated with the problem of facing the storekeepers on how to maintain adequate security of their stores, overstocking which lead to scarcity of money in store function.
As the case of store function, deterioration of materials due occur in a store in any organization also in some organization, unqualified personnel are employed in the stores as store keepers which leads organization to the getting losses due to bad store keeping but also due to less of efficiency in the factory.
1.6 Limitation of the Study
The research was carried out within limits owing to time and financial factors. It was not possible to collect the data and information necessary for this study due to excuses from the use staff in terms of inconveniences on item.
Also the research experienced come today and tomorrow syndrome as prevalent in some organization.
Finally, the volume of work and cost in involved were so much considering the areas cove7red in the organization (Rokana Industry Nekede).
1.7 Definition of Terms
Impact:
Can be defined as the effect or influence that an event situation etc has on someone or something.
Store:
A store can be defined as holding materials which are awaiting dispatch to customers for further processing or final consumption.
Stock Control:
Stock control is the process of maintaining a balanced stocks that are adequate to feed the current consumption rate that will ensure an uninterrupted production operations with due regard to minimum inventory investment.
Deterioration:
in the course of time, most materials get deteriorated in the warehouse. This must be noted and written off the books or physical factors thus rendering such item worthless over time.
Obsolescence:
Can been seen as serious source of loss with the ever increasing pace of technological advanced, products become outdated very quickly.
Even where the same product is made for a number of years, details changes are made to its design to improve it performance or reliability, its appeal to the customer and to reduce its cost.
Pilferage:
It is the extent of the loss due to pilferage depends very much on the industry concern for items having a direct appeal to the general and under profitability tempting circumstance.
Inspection:
In large organization with spectacle inspection departments, the inspection is usually undertaken by this department. Inspector have authority to accept or reject materials after inspection and endorse goods received notes accordingly unless separate inspection certificates are prepared.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Impact of Stores Function in Profitability of an Organization can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.0 Introduction
- 1.1 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Impact of Stores Function in Profitability of an Organization" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.0 Introduction
- 1.1 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Impact of Stores Function in Profitability of an Organization" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Design and Implementation of an Online Child Abuse Database Management System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Computerized child abuse database management system is a project proposed to create awareness among masses on the issues related to child abuse. The computerized system will keep tracks of all the suspicious incidents of child abuse by generating reports, aid law enforcement agency based on numerous details. Implementing this computerized system will play a crucial role in child welfare. The management system and data collection tools will meet with the Federal reporting requirements, it will also serve the information needs of an organizations, help inform management decisions and support caseworkers' interactions with children, youth, and families. The methodology adopted in this study is the structure system analysis and design methodology (SSADM) which is a technical approach for analyzing and designing …
Can the material for “Perspective of Antenatal Mother Quality of Care Rendered in Primary Health Care Facilities” be used as a guide for Midwifery Project?
Yes it can be used — The study assesses the Quality of Care Rendered in Primary Health Care Facilities and the perception of patients at the antenatal clinic to know if it is accepted or not and the factors that influences their attitudes towards cesarean section. This aim of the study is to determine the Quality of Care Rendered in Primary Health Care Facilities and the Perspective of Antenatal Mother using Enugu State Primary Health Care as a case study. In achieving this aim, the following objectives were laid out to assess the perception of Antenatal Mother in Enugu State Primary Health Care Service, determine the attitude of health care worker towards Antenatal Mother, assess the possible factors that influence their perception and attitude of Antenatal …
Can this topic “Characterization and Isolation of Bacteria from Food Vendors” be used for Microbiology Project?
Yes it can be utilized for research — Food vendors feed urban dwellers daily by providing them with a cheap and easily accessible variety of foods. The study was carried out to isolate and identify Bacteria from Food Vendors. In achieving this aim, the following specific objectives were laid out to isolate and identify bacterial species associated with food contamination, determine the microbial load of isolated bacteria and establish the public health implication of consumption of such foods. All the screened food samples had varying levels of bacterial growth ranging from 1.0 X 105 to 3.0 X 106 cfu/ml. ninety percent of the sampled foods had bacterial counts above the acceptable limits (104 cfu/ml) and 10% of the samples had bacterial counts less than (<104 cfu/ml). Six bacterial …
Is the topic “Power Electronics Devices with Its Application” recommended for Electronics Project?
Yes it is highly recommended — Power Electronics deals with the applications of solid state electronic devices in the control and conversion of electric power. Power Electronics has seen a tremendous growth in recent times and almost all the applications today use power electronic devices in some or the other form. Hence it becomes essential to study the advantages of these devices, which made it so popular. The aim of the study is to scrutinize the Power Electronics Devices with Its Application. In achieving this aim, the following specific objectives were laid out to deal with the study of the part of engineering that deals with the application of power semiconductor devices for the control and conversion of electric power and find out the application areas …
Can this topic “Comparative Study of Academic Performance of Home Economics Students in Junior Secondary School” be used for Home Economics Project?
Yes it can be utilized for research — This study focuses on the comparison study of academic performance of Home economics students in junior secondary school in Asaba Local Government Area of Delta State, Nigeria. The aim of the study is to examine whether there is difference between the performance levels of junior secondary schools' students in Asaba Local Government Area of Delta State, Nigeria. In achieving this aim, the following specific objectives were laid out to examine the level of performance of junior secondary school students in Asaba Local Government Area in Home economics, establish the prevalence of students' academic performance in Home economics in Asaba Local Government Area, and determine the reasons for the unstable performance of students in Home economics subject. As a descriptive research, …
Can the material for “Design and Implementation of Web Based Time Table for Computer Science Department” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Timetable Scheduling System for Tertiary Institution is a software application that will computerize and deal with the allocation of examination halls and time of a specific academic course of study. The aim of the study is to Design and Implement a Web Based Timetable for Computer Science Department. In achieving this aim, the following specific objectives were laid out to develop flexible and interactive timetable scheduling software that enables automatic generation of examinations schedules for tertiary institution in Nigeria and develop a simple easy-to-use software which an individual with little or no idea of software application can interact with a great deal of comprehension. The motivation that led to the implementation of the proposed system is that in the existing …
Is the topic “The Impact of Training and Development on Workers Performance” recommended for Public Administration (PA) Project?
Yes it is highly recommended — This study is an analysis of the impact of training and development on worker performance. This is the extent to which training and workers performance has been able to increase the performance of the work force in particular, and the organization in general like any organization in Nigeria training and workers performance are yet to receive the blessing of the Nigeria industrial training fund (N.I.T.F) when workers training and development. They are better place of facing challenge in their work or assigned jobs both present and future, they acquire skills, knowledge, competence, experience and self confidence in their work activities. Therefore, the research project aimed at finding out the apparent problems militating against the workers training and performance and suggesting …
Can the material for “Staff Training and Development and Teachers Productivity” be used as a guide for Education Project?
Yes it can be used — This study set out to determine the effects of training and manpower development on teachers job performance in Lagos State a Case study of Oshodi Isolo Local Education District. The survey research design was used in the study. The respondents were made up of 100 male and female teaching staff in public Secondary schools in Oshodi Isolo Local Education District. The stratified random sampling technique was used to select the respondents. A four point Likert type questionnaire titled. “Effects of Training and Development on Teachers Job Performance was prepared and used to collect data for the study. The person product Moment correlation and the t-test were used for the analysis of the data. The analysis shows that a positive relationship exists between …
Can the material for “Automobile Leasing System” be used as a guide for Computer Science Education Project?
Yes it can be used — Automobile leasing is the principal business activity for most commercial automobile which facilitates leasing of automobile (cars) to customers that met the automobile leasing criteria. The aim of the study is to Design and Implement an Automobile Leasing System. In achieving this aim, the following specific objectives were laid out to develop a system that will give customers all models and brand of automobile available for lease and their cost of leasing it for a period of one month, develop a system that will keep track of all leased cars and the time due for return, and develop an efficient system that is reliable and can sid in management decision making. The actual problem Marlum Automobile Company is facing the …
Can the material for “An Assessment on the Activities of Fraudsters Using ATM Pin” be used as a guide for Criminology and Security Studies Project?
Yes it can be used — Automated Teller Machine frauds are illegalities connected to the businesses and operations on ATMs. This includes acts such as identity theft, pin misplacement, card theft, password hacking and electronic fund transfer. The aim of the study is to assess the Activities of Fraudsters using ATM Pin. In achieving this aim, the following specific objectives were laid out to know the relationship between ATM fraud and fraud, examine the ways by which these frauds are committed, and know the measures that central bank of Nigeria has taken to mitigate this fraud. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 150 (one hundred and fifty) …