FABRICATION FOR A SET OF SIEVES AND SAKER
ABSTRACT
The fabrication of a set of sieves and shaker was carried out in paliton workshop, Enugu. After a thorough analysis on the suitable materials to be used in fabrication, galvanized steel was chosen due to its advantages over materials of fabrication. The fabrication was carried out in order to analyze the sizes of particles. The component parts of the sets of sieve and their dimensions are as follows:
- Height of sieve 5.5cm
- Number of sieves 7
- Diameter of sieve 13.5cm
- Shape of sieve circular
- Height of sieve set 44cm
In fabricating this set of sieves, some factors were taken into consideration and they are:
- The capacity of the sieve.
- The type of mixture that can be filtered in it.
- The types of properties and composition of the mixture.
- The type of material to be used for fabrication of the sieve and shaker.
- The mechanism of the filtration process and also,
- The cost, which is the determinant, factor in fabrication of any equipment.
These factors help greatly in the fulfillment of the objective of this project study. And after fabrication the projects were tested and seem to be working very efficiently with a reasonable separation of particle and cut diameter.
Using the above dimensions, the following fabrication procedures were undertaken, layout, cutting, drilling, welding, filling sand papering, washing and painting, drying assembling.
Finally, the set of sieves and shaker were subjected to the process of washing, painting and drying.
CHAPTER ONE
1.0 Introduction
Generally, all engineering aspects involve fabrication more especially for chemical plants or equipment, which are used for several processes. This fabrication is carried out so as to achieve and put to practice chemical processes with the help of some components for equipment used for the fabrication procedures enables engineers to deal with operations for separating the component of a mixture, which is automatically based on particle size analysis of materials from one particular sieve to another.
Chemical engineering mostly deals with the fabrication of sieve among other fabrication in order to fulfil theory of separation technique. In separation processes especially particle size analysis is where sieving technique are available.
During the operation of particle size analysis, many types of screen can be involves, which include Grizzy screens, Revolving screens, mechanical shaking screens, vibrating screen, electrically vibrated screens, oscillating screen, Reciprocating screens and Gyratory screens.
As this project involves the fabrication of set of sieves, it therefore requires good layout and easy separation of oversize and undersize in the contacting sieve unit.
Moreover, in the fabrication of set if sieves, we have to bear certain qualities in mind in which the set of sieves will have to portray such as determination of size and shape of the equipment, which contributes to the efficiency of the equipment. Among the above aim, the set of sieves should be considerable in terms of costing and also availability and portability of the set of sieve should be considered.
Above all, the set of sieve is fabricated in such a way that the particle of larger size than that of the sieve will be retained on the sieve while the particle of lower size will pass through the sieve and be collected on and9othet sieve as undersize, which is also separated by that sieve.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Fabrication for a Set of Sieves and Saker can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Fabrication for a Set of Sieves and Saker" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Speech Recognition System using Genetic Algorithm” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Speech Recognition software can "read" text from a document, Web page or e-Book, and also listen to voices of the system user, thereby generating synthesized speech through a computer's speakers. The aim of the study is to Design and Implement a Speech Recognition System using Genetic Algorithm. In achieving this aim, the following specific objectives were laid out to understand the speech recognition and its fundamentals, design and implement a Speech synthesizer that will recognize voice sound, design and implement a System that can listen to speech in any frequency that user specifies, and develop an application software that can mainly be used for: Speech Recognition, Speech Generation, Text Editing and Tool for operating Machine through voice. The methodology adopted …
Is the topic “Design and Implementation of Wireless Local Network in Dorben Polytechnic Abuja” recommended for Computer Science (CS) Project?
Yes it is highly recommended — This project report, design and implementation of wireless local area network in Dorben Polytechnic, Abuja is written to serve as a reference book for wireless LAN in the future whenever it is desired. This report explains the survey consideration, hardware consideration, end-user consideration and principle of wireless network.In addition, IEEE (Institute of Electrical and Electronics Engineers) this professional body have done a lot of work to make wireless network had numerous option to choice a suitable wireless router 802.11 (a, b, g, n etc.) …
Can the material for “Election Malpractice and Democratization in Nigeria’s Fourth Republic” be used as a guide for Political Science Project?
Yes it can be used — The conduct of free and fair elections has become the yardstick for measuring the strength and credibility of a country’s democracy. The absence of free and fair elections has become an almost insurmountable obstacle to democratization in most African countries, especially in Nigeria. The history of the conduct of elections in the country is predominated with the prevalence of electoral misconducts and malpractices which has weakened the nerves of democratization and the country’s prospects for consolidation of her democratic institutions. In Nigeria’s fourth republic, the crisis of democratization is anchored upon the challenges of electoral malpractice, just as the conduct of elections in the country since 1999 has been inundated with spiraling malpractices in the electioneering process. This study adopts …
Can the material for “Training and Motivation as a Tool for Improving Employee Performance” be used as a guide for Public Administration (PA) Project?
Yes it can be used — This research work entitled “Training and motivation as a tool for improving employees performance: is focused on one of the contemporary issues confronting both scholars and practitioners in the field of administration. The power holding company of Nigeria (PHCN) has been specially chosen as a case study for the research exercise. The objective of this study is majority centered on the identification and evaluation of the adverse effect of inadequate training and motivation of employee towards the realization of PHCN’s goal. In the course of this research work data was collected from both primary and secondary sources primary data was generated by means of questionnaires and oral interview while secondary data was sourced from library textbooks lecturers materials and company books of …
Can this topic “Design and Implementation of an Online Voting System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — Online Voting System refers to the option of using electronic means to vote in referendums and elections. E-Voting is an election system that allows a voter to record his or her secure and secret ballot electronically. The inefficiency of voting process in Nigeria has resulted in a lot of problems. These problems have continued to obstruct the peace of democracy in Nigeria because the choice of a capable candidate is not encouraged by the current system. The aim of the study is to Design and Implement an Online Voting System using Federal College of Education Technical Omoku as a case study. In achieving this aim, the following specific objectives were set out to design and develop a software platforms for …
Can the material for “Construction of a Battery Changer Using Silicon Controlled Regulator SCR” be used as a guide for Electrical / Electronics Engineering (EE) Project?
Yes it can be used — The practical importance of a battery charger in today world cannot be over emphasized. This is so as those batteries accumulators are immensely needed by out auto mobile and in science laboratories. This thesis describes the methodical approach to the design and construction of any battery charger. However the procedure fro developed cover the construction of battery charger for battery sizes ranging from 6 voltage to 24volatge (heavy duty) batteries. The prototype of a battery charger for these ranges of batteries has been implemented following the methodical approach as outlined in this thesis and its operational test results are quite satisfactory. adequate care has been taken in the design and construction to ensure that the resultant battery charger are both reliable and …
Can the material for “Globalization Strategies Employed by Small and Medium Enterprises (SMEs) for the Growth and Sustainability” be used as a guide for Entrepreneurship Project?
Yes it can be used — The study was carried out to investigate the Globalization Strategies Employed by Small and Medium Enterprises (SMEs) for the Growth and Sustainability using Star paper mill limited Aba, Abia State as a case study. Investigation revealed that the problem facing small and medium scale business as a result of the economic downfall, there are a number of bottlenecks, including services under capitalization with difficulty in gaining access to bank credits and other financial markets. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 150 (one hundred and fifty) respondents were selected for this study to represent the entire population of the study. For null …
Can the material for “Interpreting Theatre as a Communication Medium” be used as a guide for English Language Project?
Yes it can be used — Communication as a social tool includes a wide range of functions such as instruction, persuasion, education, entertainment, development and so on. Over the ages, all the communication mediums have evolved themselves to accommodate the various functions of communication and this is true of theatre as well. This paper is a humble endeavour towards interpreting theatre as a communication medium that can significantly contribute towards ably performing the various communication functions. It also seeks to deliberate upon the need for approaching the study of communication in the Indian perspective drawing comparisons between Aristotle’s Poetics and Rhetoric and Bharata’s Nātyasāstra. …
Can this topic “Predicting Student Performance Using Artificial Neural Network” be used for Computer Science Education Project?
Yes it can be utilized for research — An artificial neural network imitates the human brain in problem solving, is a more general approach that can handle this type of problem. The aim of the study is to design and implement a system for predicting student performance using artificial neural network. In achieving this aim, the following specific objectives were laid out as follows to develop a artificial neural network system software that will create easy and friendly user interface ANNs which will allow fast operation and analysis of student output, determine some suitable factors that affect a student’s performance and model an artificial neural network that can be used to predict a candidate’s performance based on given pre requirement data given to it. The motivation that led …
Can the material for “The Role of Manager in Small Scale Business Organization” be used as a guide for Entrepreneurship Project?
Yes it can be used — The study was carried out to investigate the role of manager in small scale business organization using Zenith Bank Kafanchan Kaduna State as a case study. In achieving this aim, the following specific objectives were laid out to examine the impact of manager to the success of Small Scale Business organization, examine if manager can influence employees to achieve organizational goal and verify if goal setting could be achieved without the manager. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 80 (eighty) respondents were selected for this study to represent the entire population of the study. For null hypotheses were formulated and tested …