DESIGN AND IMPLEMENTATION OF A COMPUTERISED BANKING SYSTEM
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Implementation of a Computerised Banking System can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Implementation of a Computerised Banking System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Implementation of a Computerised Banking System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Division of Labour and Job Specialization as a Tool for Industry Growth and Development” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — This work has it’s main objective, the determination of industrial growth and development in Enugu North, it is to determine the important of using division of labour and job specialization as a tool for industrial growth and development in vita foam company in Enugu North Local Government Area Enugu State. This study provides better understanding about division of labour and job specialization as how it will help in the growth and development of industrial in Enugu Northern and in Nigeria as a whole. In this study, the ways to grow are development using division of labour and job specialization industrial are revealed. In the methodology, the data use were the primary and secondary data, the instrument for the collection of …
Can the material for “Construction of Bookshelf in Wooden Form” be used as a guide for Civil Engineering Project?
Yes it can be used — This project work involves the construction of bookshelf for storing books with wood and nail. The wood for the construction was seasoned wood that has preservation and without defect. It was first assembled. With finishes for good appearance. In the construction process, both mechanical and manual process was used to produce a suitable bookshelf. The equipment and tools used in the construction include hammer for driving the nails, saws for cutting the woods, chisel and mallet for opening the joints used in the construction which includes dovetail joint on the drawers and between vertical and horizontal members of the shelves, terror joints, but joint at the top cover member of the shelf are box joint. The bookshelf is made up of front, back, …
Can this topic “Design and Implementation of Criminal Record Management System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — A Criminal Record Management System is an application software that enables police to have accurate statistics to draw analysis from, on information of a case, the year a crime was committed and who investigated it. The aim of the study is to Design and Implement a Criminal Record Management System using State C.I.D. Headquarters Enugu as a case study. In achieving this aim, the following specific objectives were set out as follows to develop a database system that can be used to record criminal record, implement a system that can be used to easily find existing criminal record, develop a system that can aid investigation of criminal records by querying the database based on specific criteria and present a system …
Can this topic “Design and Construction of 12V Battery Charger” be used for Electrical / Electronics Engineering (EE) Project?
Yes it can be utilized for research — A battery charger is an electrical/electronic device used to put energy into a secondary cell or rechargeable battery by forcing an electric current through it. The study was conducted to design and construct a battery charger that can be use to charge any kind of 12v rechargeable batteries including alkaline, NiCad or lead acid batteries. In achieving this aim the following specific objectives were laid out to design a device that has the ability to indicate charging process, low battery and fully charge levels through LED indicators, and design a cheap, versatile and efficient lead acid car battery charger which will interest and appeal to the “cost-minded” customer. The system consists of a step down transformer, an AC to DC …
Can the material for “Auditor and Law: Concept and Implications” be used as a guide for Accountancy / Accounting Project?
Yes it can be used — This research project is designed to bring out the importance of audit to the effective working of the organization using First Bank Nigeria Plc Okpara Avenue, Enugu state. In pursuant to this, data were collected by personal interview, questionnaires and through researcher’s observation. Secondary data were collected from journals, publications and related works. Also, findings showed that all the strategies for effective working operations are applicable in the case study. It was revealed that because of the laws guiding auditors, the attitude and perception of auditors to effective working operation in my case study was adequate. Finally, based on these findings, various recommendations were made amongst which include, that for auditor’s work to be relied upon by other or for the work of …
Is the topic “The Role of Bank in Small and Medium Business Enterprise in Nigeria” recommended for Banking and Finance (BF) Project?
Yes it is highly recommended — The research study examines the role of commercial bank in financing small scale enterprises in Uyo, Akwa Ibom State. The primary purpose of the study is to examine how SMEs can be developed through the intervention of the banking sector. Descriptive research design was adopted. The population of the study is the entire SMEs in Akwa Ibom state and United Bank for Africa (UBA). Questionnaires were used as an instrument of primary data collection. Purposive sampling technique was used to select the sample; correlation analysis was employed using chi-square. Findings revealed that there is a positive correlation between loans grants by banks and the growth and development of SMEs in Akwa Ibom State also, that SMEs cannot be concentrated in …
Can the material for “Motivation of Customers as Essential Tool in Financial Institution” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — This research work clearly brings out the motivational tools used by financial institution for attainment of financial goal. The topic “motivation of customer as essential tool in financial institution” is very essential to be used by institution. For it least for profit maximization. This motivation is applied to retain and gain more customers for institution like Banks. …
Can the material for “The Effect of Yoruba on the Spoken English of Mushin Market Women in Lagos” be used as a guide for English / Yoruba Project?
Yes it can be used — The study was carried out to examine the effect of Yoruba language on the sound system of spoken English language among the indigenous Mushin Yoruba market women in Lagos. It was to find out the features that distinguish Lagos Yoruba accent from the Received Pronunciation. Investigation revealed that despite the fact that various studies has previously been conducted on the phonology of Nigeria English, Hausa, Igbo and Yoruba languages respectively, however, research gaps exists in the area of the effect of Yoruba on the spoken English of Mushin Market women in Lagos which this study sets to bridge. It is obvious that language has gain a lot of ground among the Nigeria languages; however it is one of the major …
Can the material for “An Assessment of the Impact of Industrialization on Economic Growth and Development in Nigeria (1981 - 2016)” be used as a guide for Economics Project?
Yes it can be used — The effect of industrial development on the economic growth of Nigeria has over the past decade been a recurring issue for analysis like every economy most especially developing economies. Nigeria has enjoyed a long period of sustained economic growth since 2001 and yet, there is poor contribution from the industrial sector to the country’s GDP. There are various studies that have supported that industrial development is a pathway to sustainable economic growth. Thus, this research investigated the effect of industrial development on the Nigeria’s economic growth. Taking 1981 to 2016 as a period of study. E-Views 7.0 version statistical package was used to analyze the secondary data that was collected from CBN statistical bulletin. GDP was used as the dependent variable, …
Can the material for “Photocatalytic Degradation of Anionic and Cationic Dyes using Iron-oxide Nanoparticles” be used as a guide for Biochemistry Project?
Yes it can be used — The study determines the Photocatalytic Degradation of Anionic and Cationic Dyes using Iron-oxide Nanoparticles. In achieving this aim, the following specific objectives were laid out to identify the Photocatalytic Degradation of Anionic using Iron-oxide Nanoparticles, carry out a Spectroscopic Analysis of Iron-oxide Nanoparticles (Fe2O3-Nps), determine the Photocatalytic Degradation of Anionic and Cationic Dyes, and evaluate the Iron-oxide Nanoparticles from Photocatalytic Degradation of Cationic Dyes. The motivation of the study is that the effects of inhaled nanoparticles in the body causes lung inflammation and heart problems. The pulmonary injury and inflammation resulting from the inhalation of nanosize urban particulate matter appears to be due to the oxidative stress that these particles cause in the cells. Therefore the research work will provide …