DESIGN AND CONSTRUCTION OF AN AUTOMATIC CHANGE-OVER SWITCH WITH INDICATOR THAT WILL SWITCH LOAD FROM THE MAINS POWER SUPPLY GENERATOR WITH SIMPLICITY
CHAPTER ONE
1.0 Introduction
Industrial automation and control has contributed immensely to the high rate of the world's technological growth. Power control and automation is a part of this field which is applied in virtually anywhere electrical power is used, generated or transmitted. Manual power change-over switches have been in existence and in different forms and shapes. 1959, the advent of microelectronics has paved way to modify the manually operated change-over switches. This project deals with the design and construction of automatic change-over switch with indicator. It eliminates the time and energy spent in operating the manual change – over and starting of Gen. Set. It is fully automated. It can be used in residential houses, offices and most importantly, in factories that required constant power supply. It has so many advantages over the existing ones/types.
1.1. Background Of The Study
This project work is embarked upon to eliminate nearly every shortcomings associated with the manually operated type to ensuring that it is fully automated.
This system is realized in several functional blocks all combined to form one functional system. The first block is a 3-phase MAINS regulated dc power supply unit that powers the overall circuit and acts as the input. The output of thin block is fed into a priority encoder (74147) which selects the most prioritized phase at a time. The third block is a BCD – to – DECIMAL Decoder (7442) used to decode the prioritized phase.
The fourth is the driver stage which comprises of NPN transistor that energizes the electromagnetic relay which switches the phase in priority. The Gen set switching section is achieved using the least prioritized phase. This section switches ON the Gen set when all the NEPA phases are low, OFF or faulty. Once the Gen set phase is selected, a switching transistor fires an SCR which conducts large battering current to the ignition coil of the Gen set. Panel indicators are used to show the status of the system.
1.2. Aims And Objectives Of The Project
The aims and objectives of this project is to:
- Design and construct an automatic change-over switch with indicator that will switch load from the mains power supply (PHCN) power supply (Generator) with simplicity.
- To introduce a circuitry that will sense power outage and at the same time sense fluctuation in the power supplied to the load at any point time.
1.3. Significance Of The Project
This project eliminates the stress, time delay and other drawbacks in manually operated types. The project is modified to display the phase in use at a particular time using a single seven segment Display and its appropriate circuitry.
1.4. Scope Of The Study
This project work was carried out primarily with the aim of solving the problem of manual change-over switch when there is need for changing to generator due to power failure from public power supply.
Also, the essence of this project work is to design and construct a 90A, 220V, 50Hz automatic change-over switch which will serve as a standby switch to generator when there is power outage.
1.5. Limitations Of The Project
Due to the principal operation of the device, it cannot switch two voltage supply once, during operation. So the power switching of the supplies depends on the state in which the device is, that means it can only be in an on or off state, so as to avoid voltage clashing which will lead to fire outbreak.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Construction of an Automatic Change-Over Switch with Indicator That Will Switch Load From the Mains Power Supply Generator with Simplicity can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Construction of an Automatic Change-Over Switch with Indicator That Will Switch Load From the Mains Power Supply Generator with Simplicity" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Appraisal of the Economic Implication on Electronic Banking in Nigerian banks” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — Appraisal of the Economic implementation of electronic banking in Nigerian banks (a case study of Diamond Bank) was carried out to assess the extent of electronic payment in banking activities as well as to identify the various types of electronic banking. A descriptive research method was employed in carrying out the study. Questionnaire was drafted and distributed in order to elicit response from the respondents. The population of the study was 100 and a sample size of 80 was derived using Taro Yamane formula. Analysis was done using tables and simple percentage. Formulated hypothesis was also tested using X2 (Chi-square). The study revealed that electronic banking boosts the banking activities of any nation. It was also discovered that electronic banking …
Is the topic “Approaches for Regulating Erosion in a Construction Site” recommended for Geology Project?
Yes it is highly recommended — Construction site soil erosion is a natural process in which particles of soil are moved by wind and water, and displaced to another location. The study was carried out to examine the Approaches for Regulating Erosion in a Construction Site. In achieving this aim, the following specific objectives were laid out to identity the various causes of erosion in Construction sites and examine the appropriate materials and (new and old) used in controlling the erosion. Investigation revealed that a certain condition or factor can make a soil or structure to lose their Sharpe effectively or ineffectively attain their maximum structural physical and economic life span. It has been seen that a number of fact observed to be responsible for the …
Can the material for “The Impact of Cooperative Organization” be used as a guide for Economics Project?
Yes it can be used — The little of this study is the impact of cooperative organization in the development of Imo − state (a case study of oru − west L.G.A) this work is particularly based on the perception of cororative enterprise as regard its impact in development of any form. In chapter one of this work which is the introduction, the researcher x − rayed the dynamic nature of cooperative enterprises re− instation the main thrust of the or gain in development or as a mean of development. The problem, objective and significance of the study were clearly stated as well as scope and limitation research question on subject of study were also included. In chapter two, which deals with literature review, the researcher reviewed various …
Is the topic “The Impact of Small and Medium Scale Enterprises on Economic Growth in Nigeria (1982-2012)” recommended for Economics Project?
Yes it is highly recommended — This research work is on the impact of small and medium scale enterprises on economic growth in Nigeria. The main objective of this study is to empirically examine the impact of small and medium scale enterprises on economic growth in Nigeria. This research work made use of secondary data which were obtained from the Central bank of Nigeria Statistical Bulletin (2012). The data were collected for a period of thirty one years (i.e. 1982-2012). The Ordinary Least Square Regression Technique was employed in the analysis of the data. It was found among other things that Based on the empirical analysis, it is concluded that small and medium scale enterprises has significant relationship with economic growth in Nigeria. SME developments cuts across …
Can the material for “Design and Computerization of an Electronic Fund Transfer System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Electronic fund transfer system is an organized process of transferring fund through electronic means by the use of computer where debits and credits are made into ones account. The aim of the study is to design and implement an electronic fund transfer system. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will provide a very fast convenient, reliable and secure way of crediting to the accounts of their friends and relatives, Provide accurate and timely information will be made available hence efficiency will be advanced and maintain operational efficiency as a means of warding off competitive threat. The motivation the led to the implementation of the proposed system is …
Can the material for “Design and Implementation of Importation Processing Tracking System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — This project attempts to systematically analyze the operations, rate of goods to duties payable-and the transport of cargo in the freight industry. A lot of consideration is made to make up for the fastest means of record keeping for cargo in transit, precise item location and costing with the standard result of existing formats. In addition, the method of importation tracking and processing system have modified and reduced requirement of import key-inputs information (data). The technology of an electronic data processing system is scientific approach that stated precisely towards the understanding of importation activity as the core subject. It has been my determination to proffer, intensive and extensive importation tracking and processing system- as a method to enhance the duties of …
Can the material for “Design and Construction of a 6V Rechargeable Lamp” be used as a guide for Electrical / Electronics Engineering (EE) Project?
Yes it can be used — Researchable lamp is a source of light that is generated from a D.C sources of supply this D.C sources is a battery that can also way be charged when it current and voltage ruse. The study was conducted to design and construct a 6V rechargeable lamp. In achieving this aim, the following specific objectives were laid out to design a 6V lamp that will helps one to understand how to design a portable rechargeable lamp and examine how a source of light will be generated in the absence of electricity or power supply. Investigation revealed that in the existing system, there are improper connections of the diodes, private components in the marker because originals are difficult to be found during …
Can the material for “The Effect of Job Satisfaction on Employees’ Productivity” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — The objective of this research is to investigate the effect of job satisfaction on employees’ productivity. Job satisfaction describes how content an individual is with his or her job. It is a relatively recent term since in previous centuries the jobs available to a particular person were often predetermined by the occupation of that person’s parent. There are a variety of factors that can influence a person’s level of job satisfaction. Some of these factors include the level of pay and benefits, the perceived fairness of the promotion system within a company, the quality of the working conditions, leadership and social relationships, the job itself (the variety of tasks involved, the interest and challenge the job generates, and the clarity …
Can the material for “Design and Implementation of a Hotel Management Information System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — This project research work is a construction of hotel management software (front desk operations) for Royal Marble Hotels in Benin, Edo State. Considering the problem of the manual method of reservation faced by the front desk clerk, it is hoped that automating front desk operations will help to reduce the cost of hotel services as market success largely depends on the price of a service. The first chapter is concerned with the background of the study, objective of the study, scope of the study definition of terms. The second chapter examines the literature review, under which the researcher examine some things such as: the meaning of hotel, what is management, what is software, the meaning of hotel management software, the …
Is the topic “Audit Independence and Credibility of Financial Reporting in the Nigerian Banking Sector” recommended for Accountancy / Accounting Project?
Yes it is highly recommended — In this study the independence of auditors was critically evaluated and the importance of auditors’ independence in financial statement credibility was analyzed. In order to make informed decision it is important for the financial statement to be credible. The auditors are expected to audit the financial statement of companies in order to present a true and fair view or otherwise of the financial statement. The study adopted a survey research design. The data used for this work were collected from primary sources. The relevant data collected were analyzed using descriptive statistics of mean and standard deviation and inferential statistics of regression and correlation. The results of the analysis show that auditor’s independence affects the understandability, reliability and faithful representation of …