DESIGN AND CONSTRUCTION OF A 6V RECHARGEABLE LAMP
ABSTRACT
Researchable lamp is a source of light that is generated from a D.C sources of supply this D.C sources is a battery that can also way be charged when it current and voltage ruse. The study was conducted to design and construct a 6V rechargeable lamp. In achieving this aim, the following specific objectives were laid out to design a 6V lamp that will helps one to understand how to design a portable rechargeable lamp and examine how a source of light will be generated in the absence of electricity or power supply. Investigation revealed that in the existing system, there are improper connections of the diodes, private components in the marker because originals are difficult to be found during the construction of 6V rechargeable lamp. Man has been so used to electricity that he cannot do without it. The absence of electricity causes a lot of sadness in our daily lives. This project is a lamp that was a 6v rechargeable battery to generate light which is very useful to man both at home and otherwise. It is a system that is very portable and very effective mostly at night after it has been charged. The significance of the constructed 6V rechargeable lamp will help mostly in the night to read effectively. Also, it will help in the use of light to read in the absence of power (electricity) in the house as an emergency. Based on the findings, it is recommended that student should be properly equipped with practical because this will help to boost their knowledge on how to implement simple projects.
CHAPTER ONE
1.1 Introduction
Electricity is of great importance to our lines and has done a lot of good to our present day society it is something we cannot do without, if we are to advance technological and otherwise. It has really helped us in the powering of our system both in our domestic homes and industries. But in our own country (Nigeria), there has been always these problems of lack of power and fluctuation in power supplied, which made me to see how I can design a circuit that can generate a source of light, eve in the absence of electricity or power from the general source of power supply (PHCN).
I decided to design and write on a rechargeable lantern, which I always use a my source of light in the absence of the major source of light. Ti is a portable lamp designed to be recharged using an alternating current (A.C) and to generate a source of light using a direct current (D.C) source.
When the system is charging using an A.C. source, the lamp will never come on which is the source of light. This is because I used light emitting diode (LED) as my source of light and it is a D.C component.
As a prelude to other parts of this study, this chapter will discuss the background upon which this study was initiated, the statement of problems that led to this study, the Aim and Objectives of the study. Others are Significance of the study, Scope of work, Limitations of the Study and Definition of technical terms.
1.2 Background of Study
In the olden days, man depended solely on sun and other local source of light as the only way out. It was a big problem mostly, at nights for he ancient men. Due to the arrival of science and technology in our society, a lot benefits have been derived.
Electricity in particular came into existence by the discovery made by our great scientist called Micheal Faraday. This electricity has been transformed and modified in different ways in our present day society, these includes as a source of a energy for cooking, source of energy to drive our engines, source of power in our homes etc.
This electricity has also been modified in further ways, originally it was only the A.C source of power that was known in our society but today through the advancement of science and technology electricity has been incorporated into a D.C source, this D.C source is mostly portable.
The DC source of energy is used in our transistor radios, cell phone, torch light and rechargeable lamps etc. The DC source in this rechargeable lamp is a rechargeable battery that has the ability to store current for a long period of time. This is equally used as a source of energy supply be connecting a required load of same voltage to its positive and negative terminals as required because it has polarities.
Therefore, in Nigeria where the research was carried out, the activities that was conducted is to know the design and construct a 6V rechargeable lamp.
1.3 Statement of Problems
Investigation revealed that in the existing system, there are improper connections of the diodes, private components in the marker because originals are difficult to be found during the construction of 6V rechargeable lamp.
1.4 Aim and Objectives of Study
The aim of the study is to design and construct a 6V rechargeable lamp. In achieving this aim, the following specific objectives were laid out as follows:
- To design a 6V lamp that will helps one to understand how to design a portable rechargeable lamp;
- To examine how a source of light will be generated in the absence of electricity or power supply; and
- To construct a rechargeable lamp that will help one to understand and how a D.C source can generate a source of light.
1.5 Significance of Study
At the completion of the proposed 6V rechargeable lamp, the constructed lamp will be relevant in the following ways:
- The constructed 6V rechargeable lamp will help mostly in the night to read effectively.
- It helps me also to use light to read in the absence of power (electricity) in the house as an emergency.
- The benefits that are derivable from it is more than the maintenance factor, I attribute it such as (no fuel required as compared with A.C generators).
This study will also be of immense benefit to other researchers who intend to know more on this study and can also be used by non-researchers to build more on their research work. This study contributes to knowledge and could serve as a guide for other study.
1.6 Scope of Study
The scope of the research is focused on the Design and Construction of a 6V Rechargeable Lamp.
1.7 Limitations of the Study
During the course of this study, many things militated against its completion, some of which are:
- Time Constraint: The time frame given to accomplish this project was very short due to school academic calendar and it was carried out under pressure which made the researcher not to implement some necessary features.
- Research material: availability of research material is a major setback to the scope of the study.
- Frequent power failure: This made the researcher append more money on fuel to ensure sustainable power.
- Financial Constraint: Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information and in the process of data collection (internet).
1.8 The Report Layout
I went a long way, in term of reading browsing and other kind of researches, in order to see how this project will be accomplished (Designing of a rechargeable lantern).
The following are the various step I passed through in order to accomplish this project.
- Theories and models relevant to rechargeable lantern
- The component involved
- The design
- The circuit diagram
- The implementation and testing
- The result
- The cost analysis
- Recommendation
- Conclusion
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Construction of a 6V Rechargeable Lamp can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Construction of a 6V Rechargeable Lamp" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can this topic “Design and Implementation of Online Tutorial on Fish Farming” be used for Computer Science (CS) Project?
Yes it can be utilized for research — The tremendous impact of electronic technology (like computer and computer embedded devices, computer networking, artificial intelligence, multimedia among others) on the human psychological capabilities productivity, intellectuality and other human related activities are very obvious. The quest and virtual implementation of computer in all the fields of human endeavor increases with its inevitable impact, these impacts are on its increase due to the need for high quality and timely response. Therefore, this project titled, “Design and implementation of e-learning platforms for an introduction to C++ programming language”, is aimed at exploring and incorporating some of these sophisticated technologies for the development of electronic tutorial materials. This work examines and explains the step-by-step procedure for accomplishing the development of the proposed software …
Can the material for “Low Productivity and Its Effects in Nigeria Public Sector” be used as a guide for Public Administration (PA) Project?
Yes it can be used — The research outlines the low productivity and its effects in Nigeria public sector with a particular reference N.T.A Owerri and its associated low productivity. The introduction part gives brief account of what low productivity is, why this studies was carried out like finding out appropriate processes involved in the low productivity, the statement of effect in Nigeria. Chapter two review some of the literature term used in the study. In the other opinion productivity is defined as level of efficiency of work especially in industrial production. Increased productivity wills impares to enhance security. Chapter three deals with the method used to obtain information and collecting such data, which include area of stuffy, population sample, sampling techniques and sources of data. …
Can the material for “Design and Development of E-Voting System using Matlab” be used as a guide for Computer Science (CS) Project?
Yes it can be used — E-voting refers to the option of using electronic means to vote in referendums and elections. E-Voting is an election system that allows a voter to record his or her secure and secret ballot electronically. The inefficiency of voting process in Nigeria has resulted in a lot of problems. These problems have continued to obstruct the peace of democracy in Nigeria because the choice of a capable candidate is not encouraged by the current system. The aim of the study is to examine the Design and Development of Electronic Voting System in Matlab. In achieving this aim, the following specific objectives were set out to design and develop a software platforms for voter registration, election voting, real-time election results collation and …
Can this topic “The Role of Agricultural Extension Workers in Educating Farmers in Plantain Production” be used for Agricultural Business Project?
Yes it can be utilized for research — The study examined the role of extension workers in educating farmers and constraints farmers face in plantain production in some selected areas in Edo State, Nigeria. A total of 120 Plantain farmers were randomly selected from the study area. Farmers were interviewed using well structured questionnaire. Simple descriptive statistics and multiple regression were used to analysis the data collected. The likert scale techniques was used to identify the constraints faced by the farmers, the result revealed that 68.3 percent of the farmers were male while 31.7 percent were female, then 33.2 percent of the farmers with above 61 years of age, also 85.8 percent of the farmers have farm size ranging from 5 to 10 hectare. 52.5 percent of the …
Can the material for “Problem of Management of Public Enterprises in Nigeria” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — This project is written as a result of properly carried out research work based on problem of managing public enterprises in Nigeria most especially he power holding company of Nigeria (PHCN) owerri district. This project is designed to provide adequate and reliable information toward a through under standing of the problem of managing public enterprises in Nigeria. it also highlights the concepts of management principle of management problems of the power holding company of Nigeria (PHCN) as a public enterises in Nigeria likewise ways of improving the nature of public enterprises and other related issues. This project will be helpful to meet the needs of student in polytechnic and universities who are offering course in Public Administration or public enterprises Management …
Is the topic “A Survey of Educational Facilities in Private and Public Primary Schools” recommended for Education Project?
Yes it is highly recommended — This research work carried out to survey of educational facilities in private and public primary school in Odeda local government of Ogun State as the case study. The subject of the study were eighty (n =80) teachers . also the design method use in the study was survey design. This instrument used in the method of data collection were on four wlert scale: Available, not available, adequate and inadequate while data was codified into frequency count and analyzed with the use of percentages. It confirm that there are more adequate educational facilities in private primary schools than public primary schools but the major problem is that the government did not assist the educational facilities in public primary school there by restricting to …
Can this topic “The Role of Modern Office Managers and Irrelevant of Shorthand in the Era of ict” be used for Office Technology and Management (OTM) Project?
Yes it can be utilized for research — The study examines the Role of Modern Office Managers and Irrelevant of Shorthand in the Era of Information Communication Technology in Selected Organizations in Rivers State. In achieving this aim, the following specific objectives were laid out to determine whether shorthand still maintain its role as a vocational tool that enables the secretary to obtain and hold interesting and rewarding position in business, find out how modern office automation has affected the office managers, in carrying out their duties, eliminate the wrong impression of the public on the major function of the office manager, examine the importance of modern equipment in the achievement of organizational goals, and find out the impact of an office manager in modern business organizations. The …
Can this topic “The Impact of Environmental Resources on Academic Performance of OTM Student in Polytechnics” be used for Office Technology and Management (OTM) Project?
Yes it can be utilized for research — The study scrutinizes the Impact of Environmental Resources on Academic Performance of Office Technology and Management Student in Polytechnics in Imo State. In achieving this aim, the following specific objectives were laid out to examine the impact of environmental resources on student academic performance, evaluate the extent to which the average students responds to good working environmental resource, measure or determine what constitutes good work environmental resource and analyze true effect imposed by poor environmental resources on Academic Performance of Office Technology and Management Student. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 133 (one hundred and thirty three) respondents were selected for …
Can the material for “Effect of Qualification of Chemistry Teacher on the Performance of Secondary School Student in External Examination” be used as a guide for Chemistry Education Project?
Yes it can be used — Chemistry is an exact and a core science subject in Nigerian secondary schools. The study was carried out to investigate the Effect of Qualification of Chemistry Teacher on the Performance of Secondary School Student in External Examination using Ethiope East Local Government Area of Delta State as a case study. In achieving this aim, the following specific objectives were laid out to examine the impact of teachers’ professional qualification towards academic performance in Chemistry and evaluate teachers exposure on-the-job training towards academic performance in Chemistry. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 150 (one hundred and fifty) respondents were selected for this …
Can the material for “Design and Implementation of Biometric Students Time and Attendance Logging in System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Biometric Students Time and Attendance Logging in System is a software developed for daily student attendance in schools and institutions. The ability to compute the attendance percentage becomes a major task as manual computation produces errors, and also wastes a lot of time. The aim of the study is to design and develop a reliable, scalable and cost-effective Fingerprint based Student Attendance Management system. In achieving this aim, the following specific objectives were laid out to carry out the analysis of manual processes involved in class attendance and examination attendance and implement the design using Web Based programming. The motivation that led to the implementation of the proposed system is that the traditional system is still mostly used in lecture …