CONSTRUCTION OF SOAP CUTTING DEVICE
ABSTRACT
The aim of the project is to construct a soap cutting device capable of size-remaining the soap produced into regular bars and tablets without error in shapes and sizes.
Soap cutting devices are used to size reduce or cut the bulk of soap produced into bars and tablets. Soap cutting devices facilitate the process of cutting the produced soap to a required size that can be handled. It is a kind of modern technical way of size reducing the already produced soap in a modern and easy way.
Hardwood (Mohagany) and wire was selected for the construction of the project. Methodology of the construction involved marketing out operation which involved the dimensioning of the table and cutter (wire) — 760mm, width of the table -570mm, lenfth used as an 250mm etc.
Other operations carried out in the construction process includes, cutting, surface smoothening, grooving, nailing, and wine installation.
Finally a manual soap cutter with table was constructed with the following turbance, resistance to impact load / disturbance and branding force, reliability and accuracy.
CHAPTER ONE
1.0 Introduction
1.1 Background of Study
The project entitled construction of soap cutting device is aimed at producing equipment for the size-reduction of manufactured soap into shape, size, design and patterns.
Soap cutting device is the equipment used for cutting or size-reducing of soaps. It is the tool used for cutting, size reducing and slicing bulks of much trial and error, soap catter of various size and shape used in larger production of soaps are being designed, and example is the current professional custom cutter. The cutter has satisfied the needs of many soap makers around the world.
Other soap cutter types includes; electrical embossing and cutting machine, pneumatic chain cutting machine, cutter with wooden tuble cutting mould guided soap cutter, straight blade cutter, wavy blade cutter. (Willow, 1996). All these cutters serve the purpose of soap cutting and packaging in various soap electrical industries . for instance the electrical embossing and cutting machine can be used to emboss and cut all kinds of toilet and laundry soap fast and accurate. in the case of toilet soap production , this machine will cut the soap billets from the plodder into long bars to faced into laundry soap production, a complete set of embossing mechanism can be install at the front so that the machine can emboss and cut the soaps at the same time to produce finished product for down stream packaging.
The pneumatic chain cutting machine type cuts the bar soap from vacuum plodders into specialized length of bar. The cutting machines is fitted with XL 200, XL 280 and XLD 480 cold stamper to cut double soap bars. The cutting moulds types is designed in such a way that their bottom are grooved for cutting completely through the soap. A cutting moulds set can be used to soap from many plain moulds cutting with a wooden table is also a type of soap cutting designed to cutual soap cutting cherries. It is a manual soap cutter designed to cut large blocks of soap within minutes manually. It comes with extra cutting frame, wire and tables for different full size bars and hotel size bars. It is compact in size, curable and easy to clean and operate.
For all the mensiument types of soap cutting device, this work is an effect to develop a simple soap cutter that can serve domestic soap cutting purpose.
1.2 Statement of Problem
The setting soap into bulky mass nature after production has made the application and uses of soap to be difficult and this calls for the need to size reduce or cult the soap for easy handling and applications
1.3 Purpose /Aim / Objective of the Study
The purpose of the study is to give expert knowledge and guide on the manufacturing of soap cutting derive that is used in size reduced in small scales industries.
The project or research work is a mined at constructing a simple manned soap cutter with a wooden table that will be used for domestic soap cutting purpose and have the following properties; compact in size, Durable and easy to clean and operate, cutting frames and tables will be early and quickly to interchanged. Above all, be used to create a soap of desired shape, size and easy to handle.
1.4 Method of Research
The research method applied is construction and descriptive method the designing assembling and manufacturing of materials.
Descriptive method:- this involves the logical assessment of work carried out. The source of information includes the library internet and already researched word.
1.5 Significance of the Study
The establishment of soap cutting device manufacturing industries in our country will be of many benefit to a grate extent.
- The establishment of such industries will go a long way in providing job opportunities for engineer and the increasing numbers of unemployed citizen thereby reducing the crimerate associated with unemployment
- The high foreign exchange cost spent in the importation of soap cutting devices could be saved for other.
- It will serve as a source of income for the mation, thereby turning her from importation of soap cutting device to exportation of cutting device exporters.
- The construction of soap cutting device will create a comfortable shape, size design and patterns as regard to the desire of the society.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Construction of Soap Cutting Device can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Construction of Soap Cutting Device" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “The Effects of Broken Home on Psychological Adjustment of Secondary School Students” be used as a guide for Education Project?
Yes it can be used — This research work investigated the effects of broken home on psychological adjustment of secondary school students in Abeokuta South Local Government Area of Ogun State. This research work employed the use of questionnaire in gathering data for analysis and it consist of the following item, school of the respondents, age, sex, class, religion. Data is presented in tables and frequencies while percentage was used to analyse. From the analysis children from broken home do lack affection, involved in delinquent behaviours and always hostile and aggressive, and do not perform well academically. And more so, single mother and father affect the children educational outcome. With the result obtained and fact finding highlight families and the causes of with whom children live have …
Is the topic “Fuel Distribution in Nigeria: Problems and Solutions” recommended for Business Administration and Management (BAM) Project?
Yes it is highly recommended — The research seek to study fuel distribution in Nigeria: Problems and solutions. A case study of NNTE Enugu Depot. The major objective of the study is to determine solutions to fuel distribution problems. The study is generally descriptive. The major findings of the study are as follows: i) Inadequate maintenance of pipelines equipment and pumps lends to fuel shortages. ii) Delivery of right quantity and quality of petroleum products to filling stations promoted effective supply of fuel. The conclusion drawn from this study is that, maintenance of pi0pelines equipment and pumps enhances fuel distribution. Equally, delivery of right quantity and quality of petroleum products to filling stations promotes effective supply of fuel. Based on the findings, it was recommended that government should make …
Can this topic “Design and Implementation of an Online Petition Management System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — Petition Management System is a system that handles formal request to a public authority, usually a governmental institution with the purpose of changing public policy, calling for an official statement, or evoking certain acts by a public institution. The aim of this research is to Design and Implement an Online Petition management System that will allow citizens in a democratic society send in electronic petitions to assist government / institutional laws for better reforms with the following objectives to: enable Sending in of petitions electronically over the internet, petitions sent in can be easily managed, as government receive thousands of petitions daily, increase accountability, better governance among top government institutions and the legislative aim of government and improve the way …
Can this topic “Effect and Evaluation of Leadership Styles and Its Efficiency” be used for Business Administration and Management (BAM) Project?
Yes it can be utilized for research — Emphasis on leadership style and its effect has been a topic for regular discussion on the electronic media and newspaper by various government and academicians. The peace and unity of the nation and organization is not cordial. It is common to hear of coups and strike due to leadership style. Leadership style are democratic; autocratic and laissez fair leadership style. The leadership style used organizations tend to shape the behaviour of followers. Government has in various ways encouraged a good leadership and at the same time frowns at what could be termed bad leadership style. This is because good leadership style brings about cordial relationship between the leadership and their followers at the national level. It increases productivity and for …
Is the topic “Semantic Analysis of Nigerian English Expression” recommended for Linguistics and Communication Project?
Yes it is highly recommended — Semantics is a sub-discipline of linguistics which focuses on the study of meaning. The study was conducted to semantically analyze the Nigerian English Expression. In achieving this aim, the following specific objectives were laid out as follows to assess the level of intelligibility to typically Nigerian English expressions, carry out a semantic analysis of identified English expressions and identify the elements that constitutes uniquely Nigerian English expressions. The expressions context are made up of forty (40) established English expression interpreted based on meaning and level of intelligibility which access whether they are typically Nigerian English expressions or not. In presenting the data, table were used, this enabled the researcher to present the meaning and intelligibility assessment of the selected Nigerian …
Can the material for “Design and Construction of Fire Alarm System” be used as a guide for Electrical / Electronics Engineering (EE) Project?
Yes it can be used — Fire alarm is an electronics device that is stored in a building to detect the presence of fire accident. An automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion. The study was conducted to design and construct a Fire Alarm System. In achieving this aim, the following specific objectives were laid out to build a circuit that detects the fire and activates the Siren Sound or Buzzer and construct a device that will detect the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a fire alarm system is classified as either automatically actuated, manually actuated, or both. Automatic fire alarm systems are intended to …
Can the material for “Design and Construction of Laser Based Intruder Alarm System” be used as a guide for Electrical / Electronics Engineering (EE) Project?
Yes it can be used — Laser beam in light operated project works are mostly used as means of putting things ‘ON’ remotely or used as trap which when obstructed results in a switching into action another operation. The study was conducted to design and construct a laser based intruder alarm system. In achieving this aim, the following specific objectives were set out to develop a laser gun using a GA as diode to generate continuous laser beam for sensing by a detector, develop a receiving circuit based on LDR (light dependent resistor) to detect the laser beam, develop a switching circuit to switch into action a specified load, design a 555 timer based alarm system, and realize a suitable power supply system unit for the …
Can the material for “Effects of Socio Economic Status on the Enrollment of Students Into Science Classes” be used as a guide for Education Project?
Yes it can be used — Socioeconomic status is the blend of economic and sociological measures of an individual work experience and the economic and social position of an individual or family in connection to others on the premise of income, educational level and occupational status. The study was carried out to investigate the Effects of Socioeconomic Status on the Enrollment of Students into Science Classes. In achieving this aim, the following specific objectives were laid out to determine whether parental socioeconomic status have the same influence on the academic line of all Okpe Local Government Area Students. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 150 (one hundred …
Can this topic “The Use of Financial Accounting Information System for Management Decision Making” be used for Accounting and Finance Project?
Yes it can be utilized for research — This study focused on the use of financial accounting information system for management devision making. The objective of the study was to determine whether financial accounting information system was used by management for efficient and effective performance, and the extent the information guided and regulated management decision making in companies. This study proffered solution to the problems encountered by the management in the implementation of the financial accounting information system. The study relied mostly on secondary data such as the financial rations responses to questionnaire the financial statement statistical test. The major finding of the study was that employment of non qualified personnel in the account department lead to disregard of accounting information system. It was also found out from the results of the …
Can the material for “Teachers’ Perception of Their Public Image and It’s Influence on the Students’ Achievement in Physics” be used as a guide for Education Project?
Yes it can be used — This study examined how the teachers’ perception of their public image influences the Achievement of Secondary School Physics Students in Lagos, Nigeria. The research design adopted was quasi-experimental of the pretest − post-test non-randomized control group. Purposive sampling was used to obtain a sample of three co-educational secondary schools. Each school provided one S.S.I and S.S. II class for the study. Two instruments were used in the study, the PhysicsAchievement Test (PAT) to measure students’ achievement and Teachers questionnaire to train the teachers in the experimental groups. The instrument was pilot tested to ascertain reliability. Also, there was no significant effect of gender on students ‘achievement in Physics although, females did better than males. Finally, there was no significant interaction effect …