USE OF RAW MATERIAL INSPECTION AND ITS IMPACT ON QUALITY OF PRODUCTION
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Use of Raw Material Inspection and Its Impact on Quality of Production can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Use of Raw Material Inspection and Its Impact on Quality of Production" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Use of Raw Material Inspection and Its Impact on Quality of Production" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Is the topic “Privatization of Public Enterprises and Its Implication on Economic Policy and Development of Cross River State” recommended for Public Administration (PA) Project?
Yes it is highly recommended — The research was on privatization or public enterprise and its implication in economic policy and development of Cross River State. Data were collected primarily through the use of questionnaire and secondarily source through the reviews of relevant academic materials. The data collected were used to test the hypothesis and the result of finding revealed that, there is significant relationship between corruption and dishonest practice of staff. The study recommended that for public enterprise to meet the people’s expectations, the government should play a giant role of pumping more money into the enterprise the staff must be trained of perform their responsibilities, corruption must be reduced to its bearest minimum and management capacities of the government must be increased through further …
Can the material for “Role of Government in Co-Operative Development” be used as a guide for Economics Project?
Yes it can be used — The Role of Government in Co-operative Development emphasis on the economic growth of the nation and the eradication/alleviation of poverty among the populace. The significant of the contribution of government towards the growth of co-operative society in the country (Nigeria) cannot be over emphasized because it has brought about the reduction of dependency rate of the country. This increasing the national income of the country. The government take no special interest in the co-operative movement outside providing it with the necessary legal basis for registration and under some circumstances, granting minor privilege in the form of reduced tax rate. The aim of this project is to find out the role of Anaocha Co-operative society development, Anaocha local government area in …
Can the material for “The Degree of Dependency on Accounting Records for Resilient Financial and Business Decisions in Organizations” be used as a guide for Accountancy / Accounting Project?
Yes it can be used — The study was carried out to determine the Degree of Dependency on Accounting Records for Resilient Financial and Business Decisions in Organizations. Investigation revealed that most corporate organizations unknowingly employ Incompetent and unskilled manpower and as such the financial accounting information prepared may not show a true and fair view of the financial strength, profitability and future prospects of the organization. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 200 (two hundred) respondents were selected for this study to represent the entire population of the study. Primary data were collected from the primary source which questionnaire was used as an instrument of data …
Can the material for “Mothers’ Perspectives of Female Genital Mutilation” be used as a guide for Nursing (Science) Project?
Yes it can be used — The purpose of this study was to find out mothers perspectives on female genital mutilation (FGM) among the Maasai community in Kenya. The aim of the study can be used in utilizing the research result when planning education programs in preventing female genital mutilation. The research was carried out in co-operation with a local village which is situated in South-West Kenya, and West from Nairobi, the Kenyan capital city. Qualitative method was used to implement this study. Data was collected by interviewing four mother´s aged between 20-35 years of age, who had young daughters. The interviews were conducted between December 2010 to February 2011. The data collected was analysed by using content analysis. The results of this study revealed that the mothers …
Can the material for “Unpopularity of Modern Insurance in Nigeria” be used as a guide for Insurance Project?
Yes it can be used — The aim of this project is to bring out the reason why modern insurance is unpopular in eastern part of Nigeria a case study of Enugu states. Insurance plays a vital role in the economy but the eastern parts is yet to be insurance conscious. Chapter one of this work will deal with the introduction of the study, background of study statement of problems objective study, limitation of study and definite of term Chapter Two literature review, and bring out more details bout the reason for unpopularity of modern insurance in Eastern State …
Can the material for “Impact of heavy metals content and waste material obtained during biogas generation for sustainable energy and agriculture application” be used as a guide for Chemistry Project?
Yes it can be used — Biogas is the mixture of gases produced by the breakdown of organic matter in the absence of oxygen (anaerobically), primarily consisting of methane and carbon dioxide. Biogas can be produced from raw materials such as agricultural waste, manure, municipal waste, plant material, sewage, green waste or food waste. The wastes from agriculture are minimally used. Among the crops grown in Nigeria is the banana and produces about one million tonnes of bananas yearly, mostly for local consumption, of which the banana herb produces the fruits once in a lifetime, thus the stem becomes waste afterward. The motivation that led to the execution of the research work is that the lab scientist, doctor and agricultural engineer; lack proper estimation of heavy …
Can the material for “Teacher Use of Online Resources on Academic Achievement of Secondary School Mathematics Students” be used as a guide for Mathematics Education Project?
Yes it can be used — The study was carried out to examine the teacher use of online resources on academic achievement of secondary school mathematics students. In achieving this aim, the specific objectives were laid out to examine the relationship between students’ beliefs in learning mathematics and demographic factors and investigate the factors inhibiting teacher use of online resources in teaching mathematics among secondary school students in Abak Local Government Area. The use of online learning resources in the performance of various activities in secondary school libraries is not easily adopted as an indispensable tool for teaching and learning. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 133 …
Can the material for “Evaluation of Project Risk and the Determination of Contingency Sum for Building Developments in Nigeria” be used as a guide for Building Technology (BT) Project?
Yes it can be used — The construction industry is characterised with inherent risk and uncertainties as a result of its fragmented and competitive nature. This therefore makes it difficult to accurately estimate the cost of construction project. To achieve the objective of having work completed most especially within cost and quality, contingency sum is apportioned to cater for unforeseen items of work that may likely evolve. Therefore, this current study aims at evaluating project risks with a view to determining adequate contingency funds to improve project performance. A quantitative approach was used in obtaining data through structured questionnaires administered to the construction professionals practicing in the F.C.T. Abuja as well as survey pro forma to gather archival data on completed building projects. 402 questionnaires were returned …
Can the material for “The Measurement of the Relationship between Male and Female Students' Height and Heart Rates” be used as a guide for Applied Science Project?
Yes it can be used — This study examined the relationship between height and heart beat of male and female students in Delta State University, Abraka. The objective seeks to find out the relationship between height against the heart beat of male and female students. Calibrated stadiometer and Pulse Auximeterwas used to obtain the height and heart beat measurement of randomly selected 90 volunteers made up of 45 male and 45 female students. Total height of the individuals were measured in centimeters while pulse rate were obtained based on the number of times of beat of the heart. Statistical analyzing were conducted using mean, student t-test and Spearman rank. Results obtained from this study revealed that there is significant difference between Height of male and female …
Can the material for “Comparative Assessment of Factors Affecting Cost of Industrialized Building and Conventional Building System in Nigeria” be used as a guide for Quantity Surveying (QS) Project?
Yes it can be used — The main aim of this research work is to compare the factors affecting cost of industrialized building and conventional building system in Nigeria. The research method used in collecting data was through the use of questionnaire administered to construction professionals in Nigerian construction industry. Seventy questionnaires were administered and fifty five were returned with response rate of 73%. The instrument used in analyzing data collected was relative importance index (RI!) to rank the factors affecting the two systems in Nigeria. From the analysis it was discovered that the major factors affecting cost of industrialized building and conventional building system in Nigeria were unstable government policy, inadequate manufacturing facilities, high cost of overhead, availability of expertise, scope of work, suitable construction environment, …