THE EFFECT OF MATERIAL MANAGEMENT TECHNIQUES ON PRODUCTION PLANNING PROCESS
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
The Effect of Material Management Techniques on Production Planning Process can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "The Effect of Material Management Techniques on Production Planning Process" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "The Effect of Material Management Techniques on Production Planning Process" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can this topic “Problems of Staff Training and Development in Nigeria Companies” be used for Business Administration and Management (BAM) Project?
Yes it can be utilized for research — Training and development is a necessary factor in the attainment of organizational objectives of any organization. In every organization exists some form training and development programme. In Nigeria with the attainment of independence in 1960, the indigenization Decree and the current economic crises resulting mainly from over-dependence on oil revenue, the manpower has to be trained and developed in terms of quality and quantity so that they can effectively and efficiently control the commanding height of our economy and steer the economy of its present crises and backwardness to prosperity. The federal government of Nigeria has risen to this, by providing the National Council for management education and training and the centre for management development training schemes. This is important because it …
Can this topic “Design and Implementation of Text to Speech Application for Vision Impaired Students” be used for Computer Science (CS) Project?
Yes it can be utilized for research — A Text-to-speech application is a synthesizer software that converts text into spoken word, by analyzing and processing the text using Natural Language Processing (NLP) and then using Digital Signal Processing (DSP) technology to convert this processed text into synthesized speech representation of the text. The vision impaired students makes a lot of mistake during typing because they just assume whatever there are typing is right, this lead to the development of Text-To-Speech application. Here, we developed a useful text-to-speech synthesizer in the form of a simple application that converts inputted text into synthesized speech and reads out to the user which can then be saved as an mp3.file. Observation and interview were deployed to gather information used in developing this …
Can this topic “Design and Analysis of Water Distribution in an Unplanned Area Using ARCGIS” be used for Urban and Regional Planning (URP) Project?
Yes it can be utilized for research — Water distribution system is a complete system of its own with sub-systems that must be inter-linked from intake down to end users. The aim of this research work is to analyze Water Distribution in an Unplanned Area Using ARCGIS. In achieving this aim, the following specific objectives were laid out to determine suitable locations for water distribution centers (Reservoirs) and service areas (Catchment Areas for distribution), find the best routes for water distribution using network dataset, delineate the areas covered by the existing distribution network, and develop a model for effective water distribution using ARCGIS. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. Primary data were …
Can the material for “Design and Implementation of an Online Computer Based Test (CBT) System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — An Online Computer Based Test is a test with an implementation system using a computer as a medium for conducting tests via the internet. The presentation and selection of CBT questions are made in a computerized manner so that each participant who does the test gets a different set of questions. The aim of the study is to design and implement an Online Computer Based Test (CBT) System. In achieving this aim, the following specific objectives were laid out to develop a CBT system that automatically generates exam numbers for students and design a CBT system with real time processing of results for candidates. The motivation that led to the implementation of the proposed system is that the existing paper …
Can this topic “Impediments to the Acquisition of Computer Education by Secondary School Students” be used for Computer Education Project?
Yes it can be utilized for research — The study employed a survey designed. A sample of 800 students which were randomly selected served us the study sample. Data were collected using the questionnaire. Mean and standard derivation were used to analyze the data. It was found out that lack of interest and inadequate personnel and facilities were serious impediments to acquisition of computer education. Finally, recommendations were made that enough trained personnel should be recruited and posted to schools to teach computer studies. …
Is the topic “The Assessment of the Effective use of the Teaching and Learning of Business Education in NOUN” recommended for Business Education Project?
Yes it is highly recommended — The research work is aimed at ascertaining the Effective Use of the Teaching and Learning of Business Education in National Open University of Nigeria (NOUN). In achieving this aim, the following objectives were laid out to examine the effect of the use of instructional materials in teaching on the academic achievement in business education, determine the factors affecting the performance of student in business education, determine the relationship between the use of instructional materials in teaching and students academic performance in business education, discuss on the effect of management decision on the availability of instructional materials for teaching and learning business education, and proffer solution to the above stated problems. Business education is an aspect of the total education, which …
Can the material for “The Effect of Storage Methods on Egg Quality and Organoleptic Properties of Brown Egg Type of Domestic Fowl” be used as a guide for Animal Science Project?
Yes it can be used — Three experiments were conducted to evaluate the effect of storage method on internal and external egg quality, microbial load and sensory attributes of eggs stored fewer than four different storage conditions. A total of 250 eggs were used for the analysis. The internal and external egg quality traits studied were: egg weight, egg height, egg width, shell thickness, shell weight, shape index, albumen width, albumen height, albumen weight, yolk height, yolk width, yolk weight, yolk and albumen pH, Haugh unit, albumen and yolk index. The storage periods were 1, 2, 3, 4, 5 and 6 weeks while the methods were room temperature, oiling, refrigeration and sawdust. The conditions mimicked the everyday methods of handling eggs domestically. Microbial analysis was done …
Can the material for “Pension Reform Act of 2004 Analysis of it’s Impact on Nigeria Welfare” be used as a guide for Political Science Project?
Yes it can be used — The pension Reform Act 2004 was characterized by some problems like non-compliance, ignorance of the benefit of the pension reform act 2004 which has hinder the smooth administration of the reform act. The aim of the study is to investigate the Pension Reform Act of 2004 Analysis of it's Impact on Nigeria Welfare. In achieving this aim, the following specific objectives were laid out to determine whether the problems of the old pension scheme affected the welfare of pensioners, ascertain whether the implementation of the Pension Reform Act 2004 has enhanced the pensioners' welfare, find out if the institutional framework for the implementation of the Pension Reform Act 2004 is effective and efficient in delivering pensioners' welfare, and suggest possible …
Can the material for “Implications of Recent Trends in Students Anti-Social Behaviour for the Future of Education in Nigeria” be used as a guide for Education Project?
Yes it can be used — Anti-social behaviors are disruptive acts characterized by covert and overt hostility and intentional aggression towards others. The study was carried out to scrutinize the Implications of Recent Trends in Students Anti-Social Behaviour for the Future of Education in Nigeria. In achieving this aim, the following specific objectives were laid out to examine the approaches to preventing Anti-social behaviors among students and determine the relationship between Anti-social behaviors and the academic performance of secondary students in the area of study. Investigation revealed that a lot of students have dropped out of school and others opted to engage in criminal activities thus endangering the lives of the people living in their surroundings, The young generation no longer has role models since most …
Can the material for “Design and Construction of Mini Radio Broadcast Transmitter and Audio Console Using Frequency Modulation FM with Power Rating of 1 Watt” be used as a guide for Electrical / Electronics Engineering (EE) Project?
Yes it can be used — The early transmitter for radio broadcasting is so big and bulky that they do occupy numerous spaces. The circuitries are mainly designed with valves, which are big in sizes. With the advent of semiconductor materials such as transistors electronic equipment are now becoming miniaturized such that small transmitters are now becoming handy and compact. In line with this we choose to design a complete radio broadcasting equipment tat is compact and existence of semiconductor materials. The system units are of two categories namely: audio console for the processing and mixing of musicals is basically a condenser microphone. The transmitter unit is where the center frequency is provided. All these were designed to be in compact and small manner. This project is aimed at serving …