DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTER AND AUDIO CONSOLE USING FREQUENCY MODULATION FM WITH POWER RATING OF 1 WATT
ABSTRACT
The early transmitter for radio broadcasting is so big and bulky that they do occupy numerous spaces. The circuitries are mainly designed with valves, which are big in sizes.
With the advent of semiconductor materials such as transistors electronic equipment are now becoming miniaturized such that small transmitters are now becoming handy and compact.
In line with this we choose to design a complete radio broadcasting equipment tat is compact and existence of semiconductor materials.
The system units are of two categories namely: audio console for the processing and mixing of musicals is basically a condenser microphone.
The transmitter unit is where the center frequency is provided. All these were designed to be in compact and small manner. This project is aimed at serving a community using a small and compact radio broadcasting equipment with a power watt of 1 watt a community of 1 kilometer in radius should be covered comfortable and the audio production very clear unlike the common noisy FM microphone project.
CHAPTER ONE
1.0 Introduction
The AM transmitter generates such high power that it's prime requirement is efficiency. Amplitude modulation can be generated at any point after the radio frequency source as a matter of fact, even a crystal oscillator could be amplitude modulated except that this would be an unnecessary interference with its frequency stability. If the output stage in a transmitter is plate modulated the system is called high-level modulation.
An AM transmitter which may be either low level or high level modulated have a stable RF source and buffer amplifier followed by RF power amplifier. The audio voltage is processed or filtered so as to occupy the correct bandwidth and compressed somewhat of reduce the ration of maximum to minimum amplitude.
In IM transmitter, the prime requirement of an FM system is a variable output frequency, with the variation proportional to the instantaneous amplitude or the modulation voltage.
The power and auxiliary stages of FM transmitter are similar to those in AM transmitter except that FM has an advantage, since it is a constant amplitude modulation system all the power amplifier can be operated in class c and that is very efficient.
1.1 Modulation (Analog and Digital)
Modulation is the systematic transformation of a carrier wave in accordance with the message signal. To a large extent the success of a communication system in any given mission depends on the modulation so much so that the type of modulation is a pivotal decision to system design. There are two basic types of modulating techniques the analog and digital modulation. Analogue modulation uses sinusoidal waveform as the carrier signal while digital modulation uses a discrete or pulse train as the carrier signal.
Analogue modulation being a continuous process is obviously suited to signal that are continually varying with time. The carriers are at a frequency much higher modulating signal. The modulation process is thus characterized by frequency translation. Pulse modulation is discontinuous or discrete process in the sense that the pulses are present only at a certain interval of time. in the past, analogue modulation methods have been very largely exploited and still are because of the capital investment in existing systems and theirs basic simplify. The two most important methods of analogue modulation are amplitude modulation.
1.2 Amplitude Modulation (AM)
In amplitude modulation the amplitude of a carrier the modulating voltage whose frequency is invariably lower than that of the carrier varies signal. AM is defined as a system of modulation in which the amplitude of the carrier is made proportional to the instantaneous amplitude of the modulating voltage. Let the carrier voltage and the modulating voltage Vc and Vm respectively be represented by
- Vc = VC Sin Wct
- Vm = Vm Sin Wmt
Note that phase angle has been ignored in both expressions since it is unchanged by the amplitude modulation process from the definition of AIG amplitude vc. of the unmodulated carrier will have to be made proportion to the instantaneous modulating voltage vm sin wmt where the carrier is amplitude modulated.
1.3 Frequency Modulation
Frequency modulation is a system in which the amplitude of the carrier is made constant whereas its frequency is varied about its unmodulated frequency in a way and manner determined by the amplitude of the modulating signal. When the information signal is positive the carrier frequency is increased above its unmodulated value.
The increase in carrier frequency varies linearly with the instantaneous value of the information reaching a maximum when the modulating signal reaches its peak value. The converse applies when the modulating signals is negative ie the instantaneous carrier.
Frequency being decreased in proportion to the instantaneous value the modulating or information signal.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Construction of Mini Radio Broadcast Transmitter and Audio Console Using Frequency Modulation FM with Power Rating of 1 Watt can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Construction of Mini Radio Broadcast Transmitter and Audio Console Using Frequency Modulation FM with Power Rating of 1 Watt" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Performance Evaluation of an E-Voting Model for Effective Election System” be used as a guide for Computer Science Education Project?
Yes it can be used — Voting is an action considered to be fundamental in a democratic setting. E-voting can be referred to as an election that involves using an electronic device for the purpose of casting votes. Lack of transparency and other problems associated with semi-manual method of casting vote in Nigeria has indeed called for a more robust electronic voting system. In this paper, a model for evaluating e-voting system using fuzzy logic approach is proposed. The model was simulated and tested for students’ union election using a Federal University in Nigeria. Opinions of the students regarding the proposed model were randomly sampled and analyzed for the purpose of evaluation especially when compared with the existing system of voting. Furthermore, factors that can guarantee …
Can the material for “Knowledge and Practices of Birth Preparedness and Complication Readiness Among Pregnant Women” be used as a guide for Midwifery Project?
Yes it can be used — Birth preparedness and complication readiness (BP/CR) is a comprehensive package which is focused at promoting timely access to skilled maternal and neonatal services. This aim of the study is to determine the Knowledge and Practices of Birth Preparedness and Complication readiness among Pregnant Women in the Primary Health Care Facilities in Ado-Ekiti. In achieving this aim, the following objectives were laid out as follows to: determine knowledge regarding birth preparedness and complication readiness of mothers in Ado-Ekiti, find out the association between knowledge regarding birth preparedness and complication readiness and place of delivery, and evaluate the knowledge on Birth Preparedness and Complication readiness and obstetric danger signs. The research design used in this report is descriptive design, utilizing questionnaire method …
Can the material for “Effect of Value Added Tax on Consumer Behavior in Maiduguri” be used as a guide for Taxation Project?
Yes it can be used — Value Added Tax (VAT) is a broad based business tax imposed at each stage of production and distribution process typically designed to tax final household consumption. The study was carried out to investigate the Effect of Value Added Tax on Consumer Behavior in Maiduguri. In achieving this aim, the following specific objectives were laid out to assess the effect of VAT on consumption behavior of goods and services and identify the impacts of Consumption Value Added Tax on Income Tax in Maiduguri. Investigation revealed that poor VAT administration is one of the problems confronting VAT in Nigeria. Tax authorities perform only the technical functions without performing the needed management functions, considered the complexity of tax administration, there are bound to …
Can the material for “Computerized Immunization Documentation and Alerting System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Immunization is a method of stimulating resistance in the human body to specific diseases using microorganisms-bacteria that have been modified. The aim of the study is to design and implement a Computerized Immunization Documentation and Alerting System. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will provide a workable immunization exercise management system, identify the characteristics of diseases suitable for control by vaccine and immunization and enhance periodic report generation on immunization in Essien Udim Local Government Area. The motivation that led to the implementation of the proposed system is that there is no effective way of capturing and recording immunization information, and the manual process is time consuming …
Is the topic “Nutritional Quality of Jam Produced from Blends of Banana, Pineapple and Watermelon Pulp” recommended for Science Laboratory Technology (SLT) Project?
Yes it is highly recommended — Jam is a mixture of fruit boiled with sugar and allowed to congeal. It is often spread on bread, biscuit and ice-cream. The study was carried out to determine the Nutritional Quality of Jam Produced from Blends of Banana, Pineapple and Watermelon Pulp. In achieving this aim, the following specific objectives were laid out to evaluate the general acceptability of composite jam and ascertain the nutritive value of produced composite jam from Blends of Banana, Pineapple and Watermelon Pulp. The percentage compositions of the blends were 50:25:25; 25:50:25; 25:25:50 and 33.33:33.33:33.33 of banana, pineapple and watermelon pulps respectively. In addition to the pulp blends, 2.9% pectin produced from citrus peel was added together with citric acid, sodium benzoate and sugar. …
Can the material for “Effects of Non-audit Services on Audit” be used as a guide for Accountancy / Accounting Project?
Yes it can be used — This research paper investigates the effect of non-audit services on auditor independence, and the importance of non-audit services as a source of income for audit firms in the Nigeria. There is a positive relationship between audit fees and the purchase of both recurring and non-recurring non-audit services at the same time. When two-stage least squares are used to control for joint determination of audit services and non-audit services, there is no relationship. The lack of relationship (or positive relationship) is consistent with previous studies in this area and the results of the non-recurring non-audit services support. The study’s findings are that companies that purchase either type of non-audit services are significantly larger than those that do not purchase non-audit services. …
Can the material for “Liquidity Management and Financial Performance of the Nigeria Insurance Industry” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — This study examined the impact of liquidity management and financial performance on the Nigeria insurance industry. Secondary data used in this study were carried from text books, journals, magazines and newspaper. Our findings indicate that there was a positive relationship between liquidity management and the profitability of the Nigeria insurance industry. Based on this findings we recommend that should be prudent in extending credit facilities to their client/customers to avoid problem of load loss management and competence in financial system should be enhanced to increase asset quality. …
Can the material for “Design and Implementation of Mobile Class Attendance Management System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Mobile Class Attendance Management System is a software developed for daily student attendance in schools and institutions. The ability to compute the attendance percentage becomes a major task as manual computation produces errors, and also wastes a lot of time. For the stated reason, an efficient attendance management system using biometrics is designed. This system takes attendance electronically with the help of a fingerprint device and the records of the attendance are stored in a database. The aim of the study is to design and develop a reliable, scalable and cost-effective Fingerprint based Student Attendance Management system. In achieving this aim, the following specific objectives were laid out to carry out the analysis of manual processes involved in class attendance …
Can this topic “Design and Implementation of Electronic Voters Registration System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — The electoral system is Nigeria have had poor record in electoral process, this have been attributed to the poor registration of voters. The electoral bodies in the past were based on manual registration process, which gave room for electoral fraud mostly in the state level. Also, the state electoral bodies in Nigeria operates under a federal voters register, so the need to develop “a single, uniform, official, centralized, interactive computerized state voter registration list defined, maintained and administered at the state level is required”. This system must be electronically based and implemented and also a sustainable database for storing voters information. This research work is based on designing and implementing an electronical voting registration system that will aid capturing accurate …
Can the material for “Determinants of Capacity Utilization in the Nigeria Manufacturing Industry” be used as a guide for Economics Project?
Yes it can be used — This research work explores the determinants of capacity utilization in the Nigerian manufacturing sector within the periods of 1980 to 2009. The data used for this study were obtained through various sources like the CBN statistical bulletin for the year ended 2008 and 2009, and also from the statement of accounts and annual report published by the Central Bank of Nigeria. The variable used are Average manufacturing capacity utilization rate Inflation rate Exchange rate Ratio of government capital expenditure to GDP Commercial bank loans and advances to manufacturing sector and Electricity generation and consumption in manufacturing industry. The result shows that exchange rate, federal government capital expenditure to GDP, commercial bank loans and advances to manufacturing industry has a positive effect …