THE DESIGN AND FABRICATION OF A METAL BOOKSHELF
ABSTRACT
Knowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very expensive. This is called for presentation of books already purchased whether in the library or on the household so that it can be used by the future generation. There could only be done by stacking books systematically on a book rack where by it can be file from rats and other insects that could blestroy books.
Our aim contribution to this development is the design and manufacture of a book rack that will be economically cheap and at the same time meet up its demands.
Book racks could be made with metals or wood. Again they could be attacked to the wall or they could be made standby on the floor. Our book rack will be of metal and made to stand on the floor.
CHAPTER ONE
1.1 Introduction
A bookshelf is an invention with partition where books and files are packed on offices, libraries and even homes.
A bookshelf can be wooden, metallic or even glass. They can also be dismountable and undismountable. In our project, we dedicated to design and fabricate on undismountable met6allic bookshelves. Certain advantages were considered before starting off this project. An undismountable metallic bookshelf, if built with lart and serer its purpose. Also, lose of parts, 9of many dismountable bookshelf led into considering one undismountable type.
1.2 Description of the Bookshelf
This description of the bookshelf is as shown in fig. (I) and fig. (2), is made up of the following:
- The sides
- The back
- The partition
- The frame work.
The Sides
The sides of the bookshelf is as shown in the figure provided (fig2). 8it is made up of the square pipe frame and mild steel material welded to it. Each side is specially designed to act as the support in carrying the load undress any stress. The load displays on the system. The sides are lent at 90o to each other, giving the system a more rigid frame work.
The sides measures 1500mm Height, 1200mm Width, 500mm the dept.
The Back
The back of the book shelf is shown in the figure provided (fig2). It is made up of the same metallic mild steel used for the side, it is welded to the square pipe frame and 6the sides at angle of 90o. its measurement is 1200mm.
With a thicken of 3mm.
Since the back serves as a cover sort of to the system, a metallic sheet with a higher this chime in chosen so as to withstand rush, corrosion, intensity and weight of the system that is why one choose a material of 3mm thicken.
The Partitions
Our bookrack was designed to have 3 partitions be on to able to contain large number of books. The partitions is as shown in the figure measuring 5 fit length, 4ft width and 2ft deep. The material used for the partition in a mild steel materials. This is so because each portion is designed to carry a maximum load of at a time.
This partition is added to the square bar frame side and back of the bookrack making a more rigid frame workout of the system.
The volume of the partition and the arenas calculated as follow:
The Frame
The frame is the skeleton of the whole system, it is made of 1inch square pipe. This frame was first erected together by welding, before the sheets for the sides, back and partition where attacked to it.
The frame was designed to withstand the stress that will be exerted on it by both the sheets and the load. The tensile stress that will be exerted on the frame was calculated.
The Doors
The doors is of two parts the upper poin6t and the lower part, the upper part encloses the first two partition of the upper chamber which is of guaze. The guaze is also welded to it.
They lower part which encloses the last partition of the shelf, this door is made of steel, sheet and frame which is welded on to a hinge to help in open and closing.
The door also has a handle to aid in the movement.
The doors were designed for measure sayly of the book from rodents and tempering by introduce.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
The Design and Fabrication of a Metal Bookshelf can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "The Design and Fabrication of a Metal Bookshelf" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Production of Emulsion Paint Using Locally Manifacted Pigment and Extender” be used as a guide for Chemistry Project?
Yes it can be used — The study was carried out to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A, ammonia, deformer (Ginap) kerosene, yellow iron oxide and red iron oxide. Emulsion paint of two (2) samples was produced, and calcium carbonate locally obtained was used in larger quantity in order to reduce the cost of production of the paint with little of the expensive titanium iv oxide added. The first sample was creamy white colour paint, while the second sample has a result of the mixture of blending of locally sourced …
Can the material for “Management Crisis in Banking Industry” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — The banking industry of the Nigerian economy is today passing through what might seem the roughest phase in its history. The wave of insolvency or distress in the sector is very unprecedented comparable only to what happened during the 1st era of bank failure in Nigeria 91953-1957) and the era of free banking (1892-1952) was such that generated under stand able apprehensive among the banking public. Because of the prominent and sensitive role the banking industry plays in the determination of the buoyancy of any economy, its present state has agitated the government and people of Nigeria. In a bid to correct this unhealthy development the regulatory authorities ie. The central bank of Nigeria (CBN) and the Nigerian Deposit Insurance …
Can the material for “Effectiveness of Internal Control in a Trading Company” be used as a guide for Accountancy / Accounting Project?
Yes it can be used — This project titled EFFECTIVENESS OF INTERNAL CONTROL IN A TRADING COMPANY was considered necessary because of the frauds which are perpetuated in trading companies recently. That was part of what led to the closure of some of them. Our findings revealed that Citiserve limited has similar experience before it was able to put in place checks and balances mechanism i.e EFFECTIVE INTERNAL CONTROL SYSTEM. Therefore, the study became necessary as to examine the situation in a trading company where their internal controls are effective. For this reason I decided to carry out a research on CITISERVE LIMITED to establish the advantage, the practice, the importance and the effect of internal control on a company’s business and finances …
Can this topic “Survey of Preservation and Conservation of Local History Collections in Nigeria” be used for Library and Information Science (LIS) Project?
Yes it can be utilized for research — This research study aims at identifying the presentation and conservation of Local history collections in Nigeria, a case study of National War Museum, Umuahia, Abia State. In the process of carry out this research, the researcher identifies the problems/constrain, methods/techniques adopted, the classes of artifacts kept and also proffer solutions to the effective procedures for preservation and of local history collection in a museum under study. in the study, the researcher observed among numerous variables that fumigation gives the best method of preserving the artifacts. In line with fumigation, the establishment also place priority attention by using air conditioner to control weather condition and which in its true senses brought about prolonging the life-span of artifacts. Based on the findings and available …
Can the material for “Fungal Colonization on Human Body Surfaces” be used as a guide for Microbiology Project?
Yes it can be used — Human skin is the outermost tissue of the human body. The study was carried out to examine the Fungal on Human Skin. In achieving this aim, the following specific objectives were laid out as follows to identify the fungi isolates from the face, legs and hands of students in the area under study. Investigation revealed that bacterial are contacted during our everyday routines, some which are potentially pathogenic to human and other not human could be exposed simply by walking by a construction areas were the oil has been disturbed and scattered into the wind by the machinery. The swab sticks were quickly dropped inside labeled sample bottles and immediately taken to the laboratory for microbial analysis. Nutrient agar and …
Can this topic “Audit Independence and Credibility of Financial Reporting in the Nigerian Banking Sector” be used for Accountancy / Accounting Project?
Yes it can be utilized for research — In this study the independence of auditors was critically evaluated and the importance of auditors’ independence in financial statement credibility was analyzed. In order to make informed decision it is important for the financial statement to be credible. The auditors are expected to audit the financial statement of companies in order to present a true and fair view or otherwise of the financial statement. The study adopted a survey research design. The data used for this work were collected from primary sources. The relevant data collected were analyzed using descriptive statistics of mean and standard deviation and inferential statistics of regression and correlation. The results of the analysis show that auditor’s independence affects the understandability, reliability and faithful representation of …
Can the material for “Obstacle to Effective Implementation of Policies in the Local Government System in Nigeria” be used as a guide for Public Administration (PA) Project?
Yes it can be used — Policy making and Implementation is one issue that cannot be over emphasized because of the important role it plays I the life of any organization wishing to survive and to grow in the face of changing world. Based on the need for organizations to achieve their objectives, the researcher decided to conduct research study on the obstacles to effective Implementation of policies in the local government system in Nigeria with a particular reference to Orlu LGA, Imo state. It has been observed that policy Implementation is one of the major problems confronting Nigeria since inception. Public policies therefore plays crucial role in the state and are equally instrumental to the develop or underdevelopment of any given state. Whereas, there has …
Can this topic “Impact of Employees Motivation on Organizational Productivity” be used for Business Administration and Management (BAM) Project?
Yes it can be utilized for research — Motivation refers to the complexity of forces that inspires a person at work to intensify his desires and willingness to use his potential to perform in order to achieve organizational objectives. The study was carried out to examine the Impact of Employees Motivation on Organizational Productivity using Power Holding Company of Nigeria as a case study. In achieving this aim, the following specific objectives were laid out to determine the relationship between motivation and employee performance and examine and know the impact of motivation on employee Productivity. Investigation revealed that over the years, the poor performance of the power sector in Nigeria has been a matter of concern and debate among academics, writers, government officials and members of the public. …
Can this topic “The Effect of Population Factors on Aggregate Energy Use and Carbon Emission in Nigeria” be used for Economics Project?
Yes it can be utilized for research — Population factors are the dynamics that affect economic growth which comprises population growth, mortality, fertility and age-structural change as well as urban growth/urbanization. Owing to these, human population is increasingly affecting global climate through energy consumption. Globally, among several pollutants contributing to climate change, carbon (CO) emissions account for more than 75% of greenhouse gas emissions with about 80% of it generated by the energy sector. However, this study fills the gap in the literature of the relationship among economic growth, energy consumption and carbon emissions by examining the effect of population factors on energy use and carbon emissions in Nigeria. This is done by assessing the main evidence for the effects of population change on emissions driving climate change, mainly …
Is the topic “Marketing Strategies Tools in Promoting Library Service Delivery in Research Libraries” recommended for Library and Information Science (LIS) Project?
Yes it is highly recommended — The study explores the Marketing Strategies Tools in Promoting Library Service Delivery in Research Libraries in Edo State. In achieving this aim, the following specific objectives were laid out to assess the Marketing Strategies Tools in Promoting Library Service Delivery in Research Libraries, investigate marketing of Academic libraries services, determine the need for marketing library services in academic libraries, determine library services for marketing in Academic libraries, examine the extent of marketing library services, examine strategies for enhancing marketing of library services, and determine current techniques employed by academic libraries in marketing of library services in Edo state. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. …