THE DESIGN AND FABRICATION OF MECHANICAL
CHAPTER ONE
1.0 Introduction
In this pass, cutting of grasses in the school, track or filed, Industries hotel, public centers, Agriculture lands etc. was done by machete or cutlass. This method of manual cutting not only was laborious but also time consuming as it is human effort that is entirely needed both for cutting and motion. There was also inaccuracy in cutting level of the each inaccuracy in cutting level of the each individual as many factors will influence the late, speed h, height of cut of each individual.
Apart from all these cumbersional old method of cutting there is also risk of accident. As one can easily get cut with his or her machete/cutlass. Also there is need for mechanization since the world is going modernization bearing all these problems in mined trying to fine a solution to it, we decided to embark on this project. This project can be used for cutting of grass. And all the problems of the manual cutting was meant to be overcome.
Therefore this lawn mower is used for cutting grass to equal length ( though you can adjust to level of cut) for speed cutting, it is also lies accident fine as well, it has a reduced labour as it is an on
1 —c engine that does the accurate cutting, While the pusher provides the effort/motion.
Again to encourage farming among the farmers and those that are finding it difficult in handling the cutlass, this project was embarked to help. As it can be used clearing bush. Beside it is also used for cutting sports field (like football pitch) as well as cowns in hotels and business premises. So this project reduces human effort and should be encouraged in schools, hotels business area etc. although mower can be of electric type too. But we decided to fabricate a mechanical. type to overcome the problems of electricity. And as such, this our lawn mower can be used every where even where there is no electricity.
1.1 Identification Of Need
Early before now, West Africa as a whole, the present farmer depends on the hoe and cutlass for practically all farm operation. There tools vary in shape and size from place to place. In the high forest zone of Nigeria the small farmers must clear thick bush done either hoe or cutlass for weeding the farmland
These farm operate depends entirely on the energy using the tools which he has at this disposal. This inability that facing the farmer, has triggered these project group to research into the lasting solution to this problems.
Also (mechanical lawn mower) these problems of high payment of local labour can be brought to minimum. The production of their machines in Nigeria and lead to reduction of importation cost from Germany USA of this machine to Nigeria with high profitable to the farmers.
1.2 Historical Background Of The Project (SCOP)
Based on the development countries, Technology in farm operate is highly increased. It is clear that developments in farm machinery in West Africa started for back 1960. This project must related to the social and ecological conditions prevailing in different parts of this grate region. At the present time two trends are apparent
- Increase in use of tractors and large agricultural machinery on farms of large extent both in the high forest and savanna zones, but particularly in the later.
- The increase of annual power and small machine on peasant farms, farm operates in west Africa will become increasingly machinated, and that stage of mechanization which lies on the tractor and combine harvester on the other is refereed to as intermediate technology.
1.3 Importance Of The Project To Society
Generally, this project (mechanical low mower) has a great effect towards development and maintenance of any community in the societies, which one mounted below.
- Cutting grass of secondary, primary and tertiary field thereby reducing human effort made.
- Great portion of farmland can cut or brushed with and of lawn mower in one day.
- This project reduced number of personal that need in a particular farm operate.
- Improved food production in the society
- To reduce manpower
- To improve economy of any country
- Provision of foreign Exchange in the countries
- To reduce exportation cost to our country
- To encourage pupils, and students to be regular and the school, because no ore cutting of grass with cutlass by pupils or student.
1.4 Aim And Objectives Of The Project
1.4.1 Reduction Of Labour Cost
In application of lawn mower machines is any government field and farm land causes seriously reduction in number of labour needed in the maintenance of the, brushing and clearing of the grass.
In the past several investigation were made in lawn industry At USA, Germany etc exported to Nigerian market, from which this production is a development of already existing ones, it was localized to smite our environment conditions.
Aims and objective of the investigation on the project are nominated below. Lown mower machines. The job is easily performed without mush wasting of time.
1.4.2 Improvement Of Food Production
Local farmers can embarked on maintenance of 100 hectares of farmland with aid of lawn mower machines. This project will extract some lazy, also many people will developed interest and rendering agricultural engineering or course related to farm
1.4.3 Time Factor
This production of this project (lown mower machine) brings reduction in man hour consumed in cutting of grass which is being improved using lawn mower machine which employed some minute of an how for the job.
1.4.4 Improvement In Economy
Having farmer embark on large farm land for production of food to the citizen birth, and of lawn mower machine but not land is bound so production supply enough quantities food to market which extract improvement of countries economy and also ensure stability and the exchange.
Also boosting of employment to the youth of the town.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
The Design and Fabrication of Mechanical can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "The Design and Fabrication of Mechanical" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Impact of Cash Liquidity on the Performance of Deposit Money Banks in Nigeria” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — This study examines the impact of cash liquidity on the performance of deposit money banks in Nigeria. Cash liquidity is essential in all banks to meet customer withdrawals, compensate for balance sheet fluctuations, and provide funds for growth. The broad objective of the study is find out the effects of account receivable on financial performance of commercial banks in Nigeria and also to establish the effects of account payable on financial performance of Commercial banks in Nigeria. The primary source of data collection was used and the stratified questionnaire was used to gather relevant information regarding the subject matter. The random sampling method was used to select 50 respondents which serve as the sample size of the study. The chi-square …
Can this topic “The Importance of Human Resources and Training in an Organisation” be used for Industrial Relations and Personnel Management (IRPM) Project?
Yes it can be utilized for research — It is an indisputable fact that human resources and training are needed for success and effective performance of an employee and attainment of organisational objectives and goals. The importance of it depends largely on how the top-level leadership communicates clearly the destination and how to go about it through the employees. Training, on the other hand, has been a very important function of business organisation in recent years. Once employees are selected by the personnel manager or a consultancy firm of the organisation, they must be trained and their potentials developed. It is expected to determine whether training programmes improve the efficiency of their employees in the attainment of goals. This written research will reveal a limited scope of study and analyze …
Can the material for “Design and Development of Data Warehouse for Accident Cases and Causes for Road Safety in Nigeria” be used as a guide for Computer Science (CS) Project?
Yes it can be used — A data warehouse is a repository for all data which is collected by an organization in various operational systems; it can be either physical or logical. The aim of the study is to design and develop a data warehouse for accident cases and causes for road safety in Nigeria. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will provide an efficient way of record keeping using the rubrics of database (set of integrated files) in the Federal Road Safety Commission and provide information which will serve as an aid in knowing the various causes of several accident incidences. The motivation that led to the implementation of the proposed system …
Can the material for “Impact of Human Resources Administration on Organizational Efficiency” be used as a guide for Public Administration (PA) Project?
Yes it can be used — The role of human resources administration in ensuring organizational efficiency is important because it coordinate all the resources of planning, organizing, controlling and directing both human and material resources toward the attainment of the organization’s goals and objectives. This study also highlight the problems associated with this research work which are inadequate provision of funds to the department, improper selection and employment of staff, when the staff undergo developmental training but are not allowed or give the needed opportunity to put theory into practice, all these poise a great problems to the organizations development and efficiency. Chi-square (X2) method was used in testing the hypothesis at 5% level of significant and the data collected for this project work are presented …
Can the material for “Politics of Local Government and State Creation” be used as a guide for Political Science Project?
Yes it can be used — Agitations for state creation are almost as old as the Nigerian nation. The more states that are created, the more the problem they are intended to solve persists. Just as the exercises enfeeble the constituent units vis-à-vis the federal government so do they detach the units one from the other. The state creation exercises have heightened the indigene-non-indigene phenomenon (statism) which is antithetical to a sense of common nationhood. The federal character principle which is intended to moderate competitions among states over national cake has exacerbated ethnic rivalries and the indigene-settler syndrome in most of the states. The principle should be replicated in the states to accommodate Nigerians there rather than being discriminated against on the basis of their states …
Can the material for “Effectiveness of Internal Control System on Cooperative Performances” be used as a guide for Public Administration (PA) Project?
Yes it can be used — The research work is based on the Effectiveness of Internal Control System on Cooperative Performances using Awka South LGA, Anambra State as a case study. The major objective of this study is to assess the Effectiveness of Internal Control System on Cooperative Performances of local government in which Awka South Local Government was used as a case study. Various literatures, textbooks, journals and materials from the internet were used for the study. Survey research design was used and both Primary and secondary source of data were also used. One hundred and thirty three (133) Questionnaires were administered as the sample size of the study using a Simple random sampling technique. The data collected were analyzed using simple percentage method. Two …
Can this topic “Problems of Inadequate Fuel Distribution in Nigeria” be used for Business Administration and Management (BAM) Project?
Yes it can be utilized for research — This report on the problems of inadequate fuel Distribution in Nigeria is a critical analysis of the causes of incessant fuel scarcity in Nigeria in recent times. The report exposes the negative parts being played and is still playing by some Government Officials, special Task force on Petroleum products Distribution and Black marketers. The recommendations go a long way to redirect the government or anybody involved in the distribution of fuel in Nigeria. …
Can this topic “Design and Construction of Corn Threshing Machine” be used for Mechanical Engineering Project?
Yes it can be utilized for research — A machine for corn threshing is highly and greatly needed to consistency of usage of corn in local and international levels. With regards to this indispensable needs, a corn threshing machine is designed which operates to remove the corn grains and leaving the cobs intact. The study was conducted to design, construct, test a low-cost corn / maize thresher, evaluate the efficiency of the maize sheller, and use the maize sheller in establishing an agro-processing centre for rural farmers. In attainment to this design objective and aims, a proper considerations was given to the machinability factor which includes installation, simplification, durability, choice material, machine, low costly and prolonged life span when operate with high utilization with minimal down fine. The …
Can the material for “The Role of Cooperative Thrift and Credit Societies of the Orphanage Multipurpose Cooperative Society” be used as a guide for Economics Project?
Yes it can be used — This study investigates and examination of the role of cooperative thrift and credit societies to the development of urban area. The study was based on the orphanage mother multipurpose cooperative society. The research reviews the literature of related study and was duly acknowledge data collected through constructed questionnaires methods, comprising members of the study area. Using simple random techniques. The perceptible equations and tabular illustration were used to present data obtained in the study. Result obtained from the study suggested that members of the study area and the public benefit immensely from the activities of cooperatives societies. Hence cooperatives help in providing loans amongst its members. …
Can the material for “Effect of Peer Group and Parental Socio-Economic Background on Career Choice of Business Education Undergraduates” be used as a guide for Education Project?
Yes it can be used — The study examines the effect of Peer Group and Parental Socio-Economic background on Career Choice of business education undergraduates in Lagos State. Specific objectives of the study are to investigate the role played by peer group in career choice of an undergraduate, to find out if parents level of education have any influence on students career choice, and to determine the relationship between peer group and parental socio-economic and career choice of undergraduates. In carrying out the study descriptive research design was employed, the population of the study comprises the entire parent and undergraduate student in the University of Lagos, while the sample size analysed was one hundred and forty five (145), out of the one hundred and fifty respondents …