PRACTICAL APPROACHES FOR SOLVING LOST CIRCULATION PROBLEMS WHILE DRILLING
ABSTRACT
Lost circulation is a common drilling problem especially in highly permeable formations, depleted reservoirs, and fractured or cavernous formations. The study was carried out to examine the Practical Approaches for Solving Lost Circulation Problems While Drilling. In achieving this aim, the following specific objectives were laid out to evaluate the gelling characteristics of the system and test procedure for plugging capability and provide the successes and the failures of the methods presented above in field applications. Investigation revealed that lost circulation is a common drilling problem especially in highly permeable formations, depleted reservoirs, and fractured or cavernous formations. The range of lost circulation problems begin in the shallow, unconsolidated formations and extend into the well-consolidated formations that are fractured by the hydrostatic head imposed by the drilling mud. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. Primary data were collected from the primary source which questionnaire was used as an instrument of data collection while secondary data were sources from textbooks, journals, newspapers and the internet were employed. The data were presented on a frequency distribution table and analyzed using simple percentage, while hypothesis was tested using chi-square test. As the demand for petroleum resources increases, drilling of oil and gas wells are often carried out in challenging and hostile environments. Among the top ten drilling challenges facing the oil and gas industry today is the problem of lost circulation. Major progress has been made to understand this problem and how to combat it. However, most of the products and guidelines available for combating lost circulation are often biased towards advertisement for a particular service company. Based on the findings, the following recommendations are hereby suggested that the effect of lost circulation materials on reservoir productivity may be considered when selecting these materials for lost circulation control.
CHAPTER ONE
1.1 Introduction
Lost circulation is a common drilling problem especially in highly permeable formations, depleted reservoirs, and fractured or cavernous formations. Lost circulation problems encountered during drilling is caused by the differential pressure of the hydrostatic column which is generally greater than the formation pressure, and is especially through the openings in the rock in low pressure or depleted zones. Circulation may be lost even when fluid densities are within the customary safety-margin; less dense than the fracture density of the formation. Stopping circulation losses before they get out of control is crucial for safe and economically rewarding operations (Abbas et al. 2004). Also, drilling through sub-salt zones poses a challenge to the operator because of the problem of lost circulation encountered in these zones.
As a prelude to other parts of this study, this chapter will discuss the background upon which this study was initiated, the statement of problems that led to this study, the Aim and Objectives of the study. Others are Significance of the study, Scope of work, Research hypothesis and questions, Limitations of the Study and Definition of technical terms.
1.2 Background of Study
Loss circulation is an old-aged problem normally encountered during drilling. It is one of the most time-consuming and costly problem faced by drilling industry. Loss circulation or loss of returns is defined as the drilling fluids into the formations which are usually lost to natural or induced formation fractures (Whitfill et al., 2008). After the lost circulation occurs, the level of drilling fluid in the annulus may drop and then stabilize at a particular level depending upon the formation pressure. The loss of drilling mud may results in increased drilling time, loss of expensive mud, plugging of productive formation, and or loss of well control (Arshad et al., 2014).
As the demand for petroleum resources increases, drilling of oil and gas wells are often carried out in challenging and hostile environments. Among the top ten drilling challenges facing the oil and gas industry today is the problem of lost circulation. Major progress has been made to understand this problem and how to combat it. However, most of the products and guidelines available for combating lost circulation are often biased towards advertisement for a particular service company.
Lost circulation is a broad subject and several studies and measures have been introduced in the industry to combat it. Moore (1986) stated that in areas such as below surface casing in normal-pressure formations where natural fractures are common, the most common method used to combat lost circulation is to drill without fluid returns to the surface. The purpose is to remove the generated cuttings from the hole and deposit them at the lost circulation zone. However, this practice requires large volumes of water and close supervision as there is the possibility of encountering high drill-string torque and drag.
The use of cement as LCM has also become a common practice while drilling and many researchers have investigated its use. Cement could provide a permanent cure for the problem and is irreversible in many cases. Therefore, it is generally applied to non-producing zones (surface drilling), in which mud loss is extremely severe, as a quick but permanent solution (Fidan et al. 2004).
Therefore, in Nigeria where the research was carried out, the activities that was conducted is to know the Practical Approaches for Solving Lost Circulation Problems While Drilling.
1.3 Statement of Problems
Investigation revealed that lost circulation is a common drilling problem especially in highly permeable formations, depleted reservoirs, and fractured or cavernous formations. The range of lost circulation problems begin in the shallow, unconsolidated formations and extend into the well-consolidated formations that are fractured by the hydrostatic head imposed by the drilling mud (Moore, 1986). Circulation may be lost even when fluid densities are within the customary safety-margin; less dense than the fracture density of the formation. Stopping circulation losses before they get out of control is crucial for safe and economically rewarding operations (Abbas et al. 2004).
1.4 Aim and Objectives of Study
The aim of the study is to examine the Practical Approaches for Solving Lost Circulation Problems While Drilling. In achieving this aim, the following specific objectives were laid out as follows:
- To evaluate the gelling characteristics of the system and test procedure for plugging capability;
- To provide the successes and the failures of the methods presented above in field applications; and
- To develop practical guidelines that is general and not biased towards a particular service company product.
1.5 Research Questions
The study came up with research questions so as to be able to ascertain the above stated objectives. The specific research questions for the study are stated below as follows:
- What is the gelling characteristics procedure of the system and test it’s plugging capability?
- What are the practical guidelines that are general and not biased towards a particular service company product?
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Practical Approaches for Solving Lost Circulation Problems While Drilling can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Practical Approaches for Solving Lost Circulation Problems While Drilling" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Minimizing Defective Product Through Effective Production Planning and Control in Defence Industries Corporation of Nigeria” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — This research work examine production planning and control as a tool for minimizing defective products through effective production planning and control in Defence Industries Corporation of Nigeria (DICON), Kakuri Kaduna. Hence the scope of the research cover every activity which has to do with production planning and control. The work covers statement of the general problems, research objectives, scope of the study, significance of the study and limitation of the study. Also diverse view of authors on production planning and control and other related areas in review. The research work employs the descriptive method for the purpose of an in-depth investigation. A sample size of 70 respondents was selected from the total population of 180 staff, questionnaire were administered to …
Can this topic “Effect of Teacher’s Perception of Use of ICT on Mathematics Students Academic Achievement of Junior Secondary School” be used for Mathematics Education Project?
Yes it can be utilized for research — The study was carried out to investigate the Effect of Teacher's Perception of Use of ICT on Mathematics Students Academic Achievement of Junior Secondary School in Eket Local Government Area. In achieving this aim, the specific objectives were laid out to investigate the factors influencing teacher's perception on the use of ICT in teaching mathematics students and ascertain how information communication technology contributes to the teaching of Mathematics subject. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 150 (one hundred and fifty) respondents were selected for this study to represent the entire population of the study. For null hypotheses were formulated and tested …
Can the material for “Role of Purchasing in Quality Determination and Control in an Organization” be used as a guide for Purchasing and Supply (PS) Project?
Yes it can be used — The study was carried out to examine the Role of Purchasing in Quality Determination and Control in an Organization. Investigation revealed that materials in this respect becomes so vital that no result could be achieved without a good procurement procedure, at this instance, the purchasing department must have a good knowledge of quality control and better understanding of its specification requirement. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. Primary data were collected from the primary source which questionnaire was used as an instrument of data collection while secondary data were sources from textbooks, journals, newspapers and the internet were employed. The data were presented on a …
Is the topic “An Examination of Leadership Styles and Their Effectiveness in the Organization Performance” recommended for English Language Project?
Yes it is highly recommended — This research project aims at investigating leadership Styles and work productivity in an organization: A study of Keffi Local Government Council. Some of the topics dealt with are summarized in the research and findings are stated accordingly. …
Is the topic “The Problems Facing the Teaching of Yoruba Written Literature in Junior Secondary Schools” recommended for English / Yoruba Project?
Yes it is highly recommended — The study investigates the problems facing the teaching of Yoruba literature in Junior Secondary Schools. In achieving this aim, the following specific objectives were laid out to identify factors that may pose as problems facing the teaching of Yoruba Literature and determine which among the identified factors stands as the greatest problems facing the teaching of Yoruba literature. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 150 (one hundred and fifty) respondents were selected for this study to represent the entire population of the study. Primary data were collected from the primary source which questionnaire was used as an instrument of data collection …
Can the material for “Industrial Conflicts and Organisational Performance” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — The study on industrial conflicts and organisational performance aimed to examine the influence of conflict resolution and management in promoting and enhancing organizational performance, to identify resolution mechanism, introduced by Kaduna state civil service in the resolution and management of conflict. The study made use of primary data which are gotten from the distribution of the research questionnaires; the sample size for the study is 40. The study made use of the Pearson correlation method for the analysis. The study therefore concluded that Conflict resolution and management have significant influence on organizational performance. The study also made useful recommendation to assist the management of 7up bottling company in conflict management and policy generation. …
Is the topic “Misconception in Physics in Senior Secondary Schools” recommended for Education Project?
Yes it is highly recommended — This study investigated the senior secondary school student’s misconceptions in Physics in various Local Government Area of Lagos state. The major misconceptions were outlined and the hypotheses were tested at 0.05 level of significance using gender, age and cultural as moderator variable. Three hundred (300) SSS III Physics students were randomly selected from Eight (8) Senior Secondary Schools purposively selected from four (4) various Local Government Area of Lagos which constituted the sample of the study. Fifty (50) items test questions on misconception of students in Physics which was the instruments used in collecting data. The instruments were subjected to face, content and empirical validations. The data collected were analyzed using Pearson moment correlation, T-test. The results of the study showed …
Can this topic “Effective Inventory Control as a Means of Improving an Organization Is Performance” be used for Business Administration and Management (BAM) Project?
Yes it can be utilized for research — This research project is on effective inventory control as a means of improving and organizations performance. A case study of NBC Plc. The research was prompted by the researchers believe of the indispensable role an inventory that is properly controlled can play in gearing up the profit of an organization in any given accounting period with the increasing highcost of production attributable to scarcity of raw-material. It has therefore become necessary that an examination be made on the classification of inventory and the proper way to control and stock raw-materials. A detailed analysis of how inventories are classified, controlled and the cost of keeping inventory were studies by the researcher. …
Can the material for “Design and Implementation of Expert System on Typhoid and Malaria Diagnosis” be used as a guide for Computer Science (CS) Project?
Yes it can be used — An expert system is a software system that attempts to reproduce the performance of one or more human experts, most commonly in a specific problem domain, and is a traditional application and/or subfield of artificial intelligence. The aim of the study is to Design and Implement an Electronic Diagnosis System for diagnosing non-communicable diseases. In achieving this aim, the following specific objectives were laid out as follows to design and develop a diagnostic software that will ascertain whether the diseases could be diagnosed based on signs and symptoms, aid clinicians in diagnostic procedures and offer prescription of medication, and enable flexibility in access to information through the World Wide Web or comprehensive knowledge bases. The motivation that led to the development …
Can the material for “The Impact of Reforms on the Performance of Nigeria Civil Service” be used as a guide for Public Administration (PA) Project?
Yes it can be used — The reforms were means of responding to the problems confronting the civil service at specific times and as ways of making it responsive to the demand of the modern society. It could be observed from the analysis that virtually every regime in Nigeria had one thing or the other to do with the civil service. Colonial reforms were basically general toward indigenization the nation’s civil service. The immediate administrations at all levels after attaining independence continue with the Nigerianization process of the civil service at different speeds. The most fundamental in the history of the civil service reforms were the 1988 reforms. It made the minister the chief executive and accounting officer and the permanent secretary become politicized. The Abacha …