PHYSICAL COMPUTER UPGRADE AND MAINTENANCE
CHAPTER ONE
1.1 Introduction
In the context of this research study, a control system for the upgrade and maintenance of computers is an interconnection of software modules, making up a system that enables users to monitor and perform maintenance activities on the computer system on which it is installed so that they give the desired system response. Just like a car and a house, a computer also needs maintenance to ensure its durability. The condition of a system or asset is the physical ability considered relevant for fulfillment of the functions of its functions. As the condition deteriorates due to aging, use and other factors, the system or asset may loose its capability to fulfill it function and a failure occurs. Maintenance assists organizations in controlling, preventing and reducing periods of unavailability (Rign, 2004).
As a prelude to other parts of this study, this chapter will discuss the background upon which this study was initiated, the statement of problems that led to this study, the Aim and Objectives of the study. Others are Significance of the study, Scope of work, Research hypothesis and questions, Limitations of the Study and Definition of technical terms.
1.2 Background of Study
The computer system has grown to become an indispensable tool in the processing, storage, retrieval and transmission of information. In view of these vital functions of the computer system, it is adequate that the maintenance of computer systems is performed to enable the system last longer. To ensure this, computer maintenance engineers perform some regular routine activities to monitor the state of the computer system so that it performs its expected functions. In the light of the importance of computer maintenance activities, it is adequate for a control system for the maintenance of computers to be developed. It will go a long way to ensure that the systems are in good condition and it will also help to monitor the maintenance state of the systems.
Preventive Maintenance Inspection (PMI) is very important to preserve the reliability of a computer system and it peripherals. Through careful inspection, cleaning, and maintenance, our computer workstations will perform better and last longer than those that are neglected. The PMI is a type of control system for the maintenance of computers that allow system users to detect serious problems before they occur and perhaps prevent system crashes and reduce equipment down time. Preventive maintenance is also periodic in nature. In fact, PMI sometimes stands for Periodic Maintenance Inspection. This information can be programmed so as to have a computerized system that will facilitate monitoring of computer maintenance activities.
Therefore, in Nigeria where the research was carried out, the activities that was conducted is to know the Physical Computer Upgrade and Maintenance.
1.3 Statement of Problems
Investigation revealed that many computer users are troubled over the rate of breakdown and malfunction of their computer systems. Most times the problems arise as a result of the lack of regular maintenance activities. In addition, since a computer system may contain important files, the lack of proper maintenance may bring about data loss if the system breaks down because of virus attacks and other system threats. Also, the inexperience of computer users on how to maintain the computer system also brings about the problem of system breakdown it is in view of these problems that this research study is carried out to design and implement a control system for the maintenance of computers.
1.4 Aim and Objectives of Study
The aim of the study is to examine the processes involved in upgrading and maintaining a computer system. In achieving this aim, the following specific objectives were laid out as follows:
- To examine the PC handling procedure for proper maintenance of the computer system
- To determine the need for upgrade and maintenance control of the computer system
- To determine the activities involved in maintenance control system
- To determine the limitations of a control system for the upgrade and maintenance of computers.
1.5 Research Questions
The study came up with research questions so as to be able to ascertain the above stated objectives. The specific research questions for the study are stated below as follows:
- What is the PC handling procedure for proper maintenance of the computer system?
- What are the activities involved in maintenance control system?
- What is the limitations of a control system for the upgrade and maintenance of computers?
- What is the relevance of the need for upgrade and maintenance control of the computer system?
1.6 Significance of Study
The significance of the study is that it will provide an effective means to control, perform and monitor the upgrade and maintenance activities of computer systems. The study is also significant in that it will serve as a useful research material for other researchers seeking information pertaining to the subject. It will provide an easy avenue to perform maintenance routine on computer systems.
This study will be of immense benefit to other researchers who intend to know more on this study and can also be used by non-researchers to build more on their research work. This study contributes to knowledge and could serve as a guide for other study.
1.7 Scope of Study
The scope of the research is focused on the Upgrade and Maintenance processes involved in a Physical Computer System.
1.8 Limitations of the Study
During the course of this study, many things militated against its completion, some of which are:
- Time Constraint: The time frame given to accomplish this project was very short due to school academic calendar and it was carried out under pressure which made the researcher not to implement some necessary features.
- Research material: availability of research material is a major setback to the scope of the study.
- Frequent power failure: This made the researcher append more money on fuel to ensure sustainable power.
- Financial Constraint: Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information and in the process of data collection (internet, questionnaire and interview).
1.9 Definition of Terms
Maintenance: Work that is done regularly to keep a machine, building, or piece of equipment in good working condition.
Control System: An interconnection of components forming a system configuration that will provide a desired system response.
Troubleshooting: The act or process of identifying and eliminating problems or faults, especially in electronic or computer equipment
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Physical Computer Upgrade and Maintenance can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Physical Computer Upgrade and Maintenance" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Physical Computer Upgrade and Maintenance" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Effect of Poor Study Habits Students Academic Achievement” be used as a guide for Education Project?
Yes it can be used — The Study habits of individual going through educational process are what will determine the study skills such individual would possess and invariably determine the level of academic achievement or performance. Study habits call be categorized Into either good or poor. This study was embarked upon to find out various causes and effects of poor study habits on students’ academic achievement. I also embarked upon this study with the hope to contribute suggestions and recommendations that would reduce these poor habits to the barest minimum if not totally eradicated. The population was JSS 2 Students from one public school and two private secondary schools chosen from urban and rural areas of the local government under study. A total of 150 Students …
Can the material for “Isolation Identification and Characterization of Fungi Associated with the Spoilage of Corn” be used as a guide for Microbiology Project?
Yes it can be used — Fungi spoilage organisms are silently invading acidifying, fermenting, discoloring, and disintegrating microbes that render corn (zea mays) unpalatable and unsafe. Fungi spoilage is caused by two factors, (biotic) living which includes insects, birds, rodents and microorganisms and (non-biotic) non-living which includes temperature, humidity and time. Two samples of spoilt corn, red (treated) and white were taken from the store respectivly for investigation to ascertain the microorganism associated with the spoilage of the corn. Attention was focused on fungi. Different methods were used in the identification and five genera were isolated. Mucor spp occurred with a frequency of approximately 6%, Aspergillus spp 9%, Rhizopus spp 15%, Penicillium spp 33% and Fusarium spp. 36%. Fusarium spp was most frequent in occurrence in …
Can the material for “The Impact of Standard Costing on Profitability and Managerial Effectiveness on a Manufacturing Industry” be used as a guide for Accountancy / Accounting Project?
Yes it can be used — The impact of standard costing on profitability and managerial effectiveness of a manufacturing industry. The standard cost reveals the goals, spur actions, and provide check or controls such that exceptional profit oriented goal performance can be achieved and on the reverse, adequate punishment to be exercised for bad performance. Standard costs cause appraised to be made over production facilities and from management intentions and capabilities and is a first step in strength and weakness appraisal.There also led to the preference of standard costing to other methods with the development of standard of standard costing system in 1920s, it was brought into the accounting system that total variances might be accumulated as well as detailed variances.It is believed that standard costing …
Can the material for “Design and Construction of Automatic Hand Dryer with Temperature Display” be used as a guide for Electrical / Electronics Engineering (EE) Project?
Yes it can be used — This research work deals on the design and construction of automatic hand dryer with temperature display facility which is capable of drying a wet hand placed under its vent goes of automatically. It corporate a temperature sensing and displays unit which displays the temperature of the blown out air. This system is designed in top-down methodology using passive and active components sensors (LM35 & LDR) at the input to sense temperature and hands respectively. The control unit is made up of signal conditioning unit, voltage comparator and frequency generator, and decimal counting unit. The output interface comprises transistor, driver, actuator, Electromagnetic relay and a –digit seven segment Display. The sensor are installed at the front of the blower and this …
Can the material for “Design and Construction of a 3 Way Inter Communication System” be used as a guide for Electrical / Electronics Engineering (EE) Project?
Yes it can be used — An intercommunication system is nothing but the communication between two or more persons not close to one another. This does not mean we should categorize telephones, fax, teleprinters, telegraphs etc. an example of intercom system sine they are used in communication between people. Infact, intercom involves short distance places. It is limited in electronics, offices, and hospitals. The intercom system under is a three way station type. This means that a person can communicate to the other at another station at his own convenient time. They call once another attention by the use of the tone generated by the use of tone generator. Depress a button and the tone sounds, and the same switch is thrown to the intercom circuit thus they …
Can the material for “Impact of Recruitment and Selection Procedure on Employee’s Performance in Lead Way Assurance Company, Kaduna” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — The research work undertaken is on “Impact of recruitment and Selection Procedure on Employee’s Performance” a case study of Lead Way Assurance Company, Kaduna. For the research work to be adequately understood the researcher introduced the subject matter by highlighting the statement of the general problem, the researcher hopes to get with kin interest the importance attached to impact of recruitment and Selection especially as it affects the organization. Also the researcher hopes to find out problems associated in Recruitment and selection and it emphasis the importance and variable that will bring about good decision within the organization. Also the research project touched the method of gathering data use in this study, the use of primary method was used which is the questionnaire …
Can the material for “The Impact of Information Technology in Teaching and Learning of Home Economics in Tertiary Institutions” be used as a guide for Information Technology Project?
Yes it can be used — The study examined the use of information technology in teaching and learning of home economics at the University of Lagos, Akoka, Lagos State. Descriptive research survey was used in the assessment of the respondents’ opinions using questionnaire. A total of 100(one hundred) respondents were randomly selected and used as the representatives of the entire population of the study. The results revealed that there is a significant influence of ICT on students’ moral behaviour in the school, there is a significant relationship between the cost of ICT and students’ academic performance in school, there is a significant gender difference in delinquent behaviour of students due to use of ICT in school, and there is a significant relationship between the use of ICT …
Can the material for “The Impact of Foreign Direct Investment on Economic Growth in Nigeria” be used as a guide for Economics Project?
Yes it can be used — Foreign Direct Investment has been widely described as an indispensable vehicle of economic growth, Various researchers have tried to advocate foreign direct investment as a tool for employment generation, transfer of technological skills, manpower development and increased foreign dexchange earnings. This study was carried out to determine the impact of FDI on economic growth in Nigeria. The study made use of the ordinary least square (OLS) method of estimation in determining the impact of FDI amid other variables on economic growth from the period of 1980 − 2010. This study further reveals that inflation rate have a negative influence on economic growth. Recommendation based on the findings made are geared towards a restructuring and redirecting of foreign direct investment if …
Can this topic “Web Based ATM Point Locator System using GPS” be used for Computer Science (CS) Project?
Yes it can be utilized for research — The ATM Point Locator using GPS is a system designed to assist bank customers and financial institutions to ease the location of Automated Teller Machines (ATM). The aim of the study is to Design and Implement of an ATM Point Locator using GPS. In achieving this aim, the following specific objectives are laid out to develop a system that will: capture ATM centres location using Global Positioning System (GPS), locate a close by ATM location from the user’s present position in Minna, and display the status of a particular ATM. The proposed system is developed on hybrid application platform for mobile application. Smart phones are recommended for this proposed system. Proposed system is subjected to users in Minna alone. The …
Can the material for “Attitude of the Judiciary Towards Admissibility of Confessional Statement” be used as a guide for Law Project?
Yes it can be used — The study scrutinizes the Attitude of the Judiciary towards Admissibility of Confessional Statement. In achieving this aim, the following specific objectives were laid out to assess the Admissibility Confessional Statement and the attitude of the Judiciary, find out the factors that makes the confessional statement inadmissible and irrelevant, and examine the voluntariness and retraction of a confessional statement as well as confessions of other offences in addition to those charged. A confession is a species of admission. When in the course of an investigation into a criminal offence, a suspect has made a statement to the police tending to show that he has committed that offence, the statement is known as a confession. Confession is governed by rules which assist …