EVALUATION OF HOT- GAS AND HEATED TOOL WELDMENTS OF POLYPROPYLENE / BONE PARTICULATE COMPOSITES
ABSTRACT
The evaluation of Hot-Gas and Heated-Tool weldments of Polypropylene/Bone composite was conducted. The composites were formulated by incorporating up to 30% by weight of calcined cow bone powder at an interval of 5% and -75µmsieved size was used as reinforcing phase during compounding process. The polypropylene materials (in unreinforced state) and various polypropylene/bone composites were welded, using hot-gas and heated-tool welding processes. Mechanical properties (tensile strength, flexural strength, impact strength and hardness) and physical properties (density, water absorption, degradability and morphology) of polypropylene and polypropylene/bone composite in both unwelded and welded conditions were examined. Results obtained showed increase in density (by 40% at 30% reinforcement); the amount of water absorbed increased as the time of immersion increased.
Although the unreinforced polypropylene was saturated after 192 hrs of immersion in water, the reinforced composite's water uptake continued beyond 192 hrs in proportion of filler amount. Similarly, there were marked improvements in mechanical properties in the Unwelded Composite (UWC), which was attributed to the reinforcing ability of the bone. However, relatively lower values were recorded when welded samples were examined. More so, there were drops in tensile strength after 15% (40.91MPa) and 20% (41.54 MPa) in Heated Tool Weldments (HTW) and Hot Gas Weldments (HGW) respectively. On the basis of comparison, these values showed that at 15% reinforcement addition, HTW has strength value 16.70% lower than UWC of the same composition (15% bone), while in composite with 20% of reinforcement, the strength value of HGW was found to be 23.23% lower than UWC of the same composition.
Furthermore, flexural strength and hardness witnessed increase as more of polypropylene was replaced by bone powder. Impact energy decreased and then increased; after 10% of reinforcement addition, all but UWC set of samples witnessed drop in their ability to absorb energy on impact as a result of bone additions. These behaviours have been explained in terms of strengthening effect and volume fraction of the reinforcement as well as the effect of welding processes.
CHAPTER ONE
1.0 Introduction
The development of many technologies that make our existence so comfortable depends largely on the availability of suitable materials (Callister, 2007). However, most of these technologies require a material with unusual combination of properties (e.g. high specific strength, magnetic—transparent, conductive—transparent, catalytic—magnetic, huge yet invisible to human eye and so on), which indeed exceed the domain of our conventional metal alloys, ceramics, polymers, heat treatments etc (Luigi and Gianfranco, 2005;Hanemann and Vinga 2010).
Nevertheless, the use of compositesas another class of engineering materials has proven to be vital and a promising candidate in the areas of these advanced technologies. Other answers to these contemporary developments include bio-technology, nanotechnology to mention a few. Composites were developed to improve on the properties (strength to weight ratio, good corrosion resistance, thermal stability etc) of a monolithic material so that it could be used in sophisticated areas such as aviation (where high specific strength is desired), marine (where low weight and high corrosion resistance guaranty safety), sporting equipment (where less weight is appreciated), and many other applications which include high performance rocket-motor and pressure vessels (Harris, 1999).
Composites are made up of primarily two major individual materials referred to as constituent materials. These constituent materials are termed as matrix and reinforcement. At least one portion of each type is required. The matrix material surrounds and supports the reinforcement materials by maintaining their relative positions; while the reinforcements impact their special mechanical and physical properties to enhance the matrix properties. The net effect is thus an attainment of a material with a unique combination of properties not common to either the matrix or the reinforcement (Matthews and Rawlings, 2005; Callister 2007). The common matrices used include metals/alloys, ceramics and polymers while the reinforcement can be in form of fibre (short or continuous) or particulate reinforcement (Hull and Clyne, 1981).
Depending on the matrix and the reinforcement used in composite formulation, properties of the composite are indeed direct interpolation of its constituents' properties. As a consequence,thermoplastic composites display appreciable properties which are known to be inherent features of their matrices (Matthews and Rawlings, 2005). In line with this, thermoplastic reinforced composites enjoy high demand with increased interest to developing technologies that transform these classes of composites into a form most suitable for practical applications (Yousefpour et al., 2004).
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Evaluation of Hot- Gas and Heated Tool Weldments of Polypropylene / Bone Particulate Composites can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Evaluation of Hot- Gas and Heated Tool Weldments of Polypropylene / Bone Particulate Composites" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Is the topic “Determinant of Internal Control System Effectiveness in a Manufacturing Company” recommended for Accountancy / Accounting Project?
Yes it is highly recommended — The study sought to determine the effect of internal control system on financial performance of manufacturing firms in Tuyil pharmaceutical ltd. To achieve the objective of this study, the study used hypothesis testing research design. The study tested the following hypotheses: H1: Internal Controls and Financial Performance are positively related; H2: Internal Controls have a significant impact on Financial Performance. The population chosen for this study was 65 working staff of the Tuyil ltd. The study selected a sample of 20 working staff from a target population of 65 working staff. The sample was drawn using stratified random sampling technique. The study relied on both primary and secondary data. Primary data was collected using structured questionnaires while the secondary data …
Can the material for “The Application of Ratio Analysis to Business Organisations” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — Financial information provided in financial statements are useful in business decisions, however, it must be noted that financial statements are means to an end in themselves. This study examines the effectiveness of the application of Ratio analysis to business organizations and the need to understand and interprete the contents of financial statements. Various classes of ratios were examined under literature review. This gives an insight to how ratios can be used to predict and determine organization’s performance over a period of time. Usefulness of ratio analysis was discussed and its limitations. Summary of major findings, conclusion and recommendations was made based on the information gathered. The reader will find this work useful in their day-to-day business activities and its effective application to their business …
Can the material for “The Relationship Between Unemployment and Rape in Nigeria” be used as a guide for Sociology Project?
Yes it can be used — Rape and similar gender-based offences remain threat to national development and family cohesion. Hardly does any day pass without cases of rape being reported in Nigeria. The study was carried out to examine the Relationship between Unemployment and Rape in Nigeria. In achieving this aim, the following specific objectives were laid out to examine the implications of the increased unemployment rate and investigate the factors that lead to the high rate of unemployment in Nigeria. Investigation revealed that socio-economic inequality and lack of opportunities for social advancement and employment are some of the root causes of crime and violence. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this …
Is the topic “Impact of Financial Institution to the Growth of Small Scale Business” recommended for Accountancy / Accounting Project?
Yes it is highly recommended — The study was carried out to examine the impact of financial institution to the growth of small scale business. In achieving this aim, the following specific objectives were laid out to ascertain if the financing options available to the Small Scale Business are practically obtainable to support the capital required for their operation and examine the extent to which Small Scale enterprise contributes to economic development. Financial institutions have some problems they are confronted with too. These problems include borrowers not paying back at stated time, government policies and regulations. These problems affect the smooth running of financial institutions because ties up capital that would have been used for further development of the sector. The research design used in this …
Can the material for “Determination of Heavy Metals in Fermented Cassava” be used as a guide for Chemistry Project?
Yes it can be used — The study was carried out to determine the Heavy Metals in Fermented Cassava. In achieving this aim, the following specific objectives were laid out to examine the dietary exposure to heavy metals through consumption of cassava flour and create public awareness and monitor the cassava fermentation time for breakdown and removal of heavy metal. Investigation revealed that in cassava food processing, it is often necessary to carry out trace element analysis to ensure that harmful and non-essential elements are kept at low concentrations as much as possible. Most of these ions are toxic to human beings by interfering with enzyme functions while some may have stimulatory effects. Toxic heavy metals (Zn, Cu, Cd, Hg, Co, Mn, Cr) were detected in …
Can the material for “Impact of Leadership Styles on Employee Productivity (Performance) in the Library of Imo State Polytechnic Umuagwo” be used as a guide for Library and Information Science (LIS) Project?
Yes it can be used — Leadership style is the way which influence process is exercised. It is the characteristics ways in which the leadership relates to their employees. The study was carried out to investigate the Impact of Leadership Styles on Employees Productivity Performance in Imo State Polytechnic Library. In achieving this aim, the following specific objectives were laid out to find out the impact of leadership styles on employees productivity and performance in this library and factors responsible for the choice of leadership style in the library of Imo state polytechnic, Umuagwo. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. Primary data were collected from the primary source which questionnaire …
Can the material for “Analysis of the Determinations of Inflation in Nigeria” be used as a guide for Economics Project?
Yes it can be used — Inflation has become a heading topic of discussion in the Nigeria economy and other countries of the world. The press as its effect penetrates more deeply into the nation’s life. It has become something of a platitude to say that sharp, continuous increase in price is among the serious economic problems of our time. The main purpose of the study is to highlight the determinants of inflation in Nigeria and to check the trend of inflation over time (i.e. 1980 -2010) and the measures to curb it. The methodology involves the use of ordinary least square econometric techniques using PC Give econometric package. These include T-test, to test the explanatory power of the estimates, the F-test to determine the significance of …
Can this topic “Design and Implementation of Human Resource Management System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — Human Resource Management System (HRMS) is an application that combines many human resource functions, including Employee Record, Payroll System, Recruitment and Training, Performance Appraisal and Retirement Administration System review into one package in order for the organization to perform at a maximum and highly fulfilling environment. The aim of the study is to design and implement a Web-Based Human Resource Management System using Nigeria Breweries Plc, Aba as a case study. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will create a database system for potential applicants, with emphasis on their qualification and experience, determine appropriate match of applicants with skills and jobs experience to appropriate organization for possible …
Can the material for “Design and Implementation of a Web Based Price Tag Management System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Computerized Product Price tag management can be defined as any marketing tactic used by firms to create the perception that its current price offers good value compared to competitors’ price, past prices or future prices. The aim of the study is to design and implement a Computerized Product Price Tag Management System. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will aid in the determination of prices of products based on cost variables and allow the easy updating of price tags. The motivation that led to the implementation of the proposed system is that a lot of retailers do not have an effective method of managing price tags such …
Can this topic “The Role of Tax Authority in the Detection and Prevention of Tax Fraud in Nigeria” be used for Accountancy / Accounting Project?
Yes it can be utilized for research — Tax fraud entails cheating on a tax return in an attempt to avoid paying the entire tax obligation. The study was carried out to assess the role of tax authority in the detection and prevention of tax fraud in Nigeria. In achieving this aim, the following specific objectives were laid out to examine the impact of tax fraud offence on the revenue of the Government in particular and the economy of the country and identify weaknesses in addressing tax fraud by tax authority. Investigation revealed that tax fraud and other tax offences perpetrated by tax payer heavily harm the economy, lower investment levels and reduce government revenue generation. Anti-tax fraud and tax authority strategies are often not effective enough. The …