DESIGN OF A NATIONAL IDENTITY CARD SYSTEM
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design of a National Identity Card System (A Case Study of National Identity Card, Ngwo Local Government Area Enugu State) can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design of a National Identity Card System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design of a National Identity Card System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Peer Group Influence and the Teaching and Learning Environment” be used as a guide for Education Project?
Yes it can be used — This study examined the peer group influence and the teaching and learning environment (A case study of the academic performance of students in selected secondary schools in Mainland Local Government Area of Lagos State). In this study, relevant and extensive literatures were reviewed under some sub-headings. The descriptive research survey was used in this study for the assessment of respondents’ opinions using the questionnaire and the sampling techniques. One hundred and sixty (160) respondents were used as samples for this study to represent the entire population of the study. A total of five null hypotheses were formulated in this study and analysed, using the independent t-test statistical tool at 0.05 level of insignificance. At the end of the analyses, the following …
Can the material for “Prospect and Challenges of Media Management in Nigeria” be used as a guide for Mass Communication (MC) Project?
Yes it can be used — Media management is seen as a business administration discipline that identifies and describes strategic and operational phenomena and problems in the leadership of media enterprises. The study was carried out to investigate the Prospect and Challenges of Media Management in Nigeria using Vanguard Newspaper and Federal Radio Corporation of Nigeria as a case study. Investigation revealed that the media in a way have become one of the strongest linkage institutions bridging, as it were, the gap between the state and the citizens. It has always been claimed by government and private that interferences with the activities of the media, is non-conformity to the policies of owners have always resulted in the immediate dismissed of journalist from their duties. This research …
Can the material for “Budgets, Budgetary Controls and Its Link to the Performance of an Organization” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — Every organization doing exceedingly well on the face of the earth rely heavily on budgets, and budgetary control measures to improve performance, through adequate resource allocation. Budget and Budgetary control, both at management and operational level looks at the future and lays down what has to be achieved. Control checks whether or not the plans are realized, and puts into effect corrective measures where deviation or shortfall is occurring. This study identifies the link between budget and budgetary control and performance of the selected organization in Ghana, as considered in this study, being a sample of the entire population of the organizations in Ghana. The sources of data for the research were both primary and secondary sources. Census technique was used for …
Can the material for “Strategic Management Accounting and Profitability of Firms” be used as a guide for Accounting and Finance Project?
Yes it can be used — Strategic management accounting (SMA) is central to the accomplishment of organizational objectives. Without the implementation of SMA, it would be quite difficult for a firm to survive, given the competitive nature of business environment in Nigeria. The study examined the impact of SMA on profitability of firms in the Nigerian brewery industry. The study prioritized on three SMA techniques namely corporate planning, capital investment analysis and cost-volume profit analysis. The study employed the descriptive survey design. Structured questionnaire was administered to 144 randomly selected staff of six brewery firms in Nigeria. The data collected were analyzed by the use of descriptive statistics and multiple regression analysis. Findings of the study revealed that corporate planning, capital investment analysis and cost-volume profit …
Is the topic “Design and Construction of Battery Charger” recommended for Electrical / Electronics Engineering (EE) Project?
Yes it is highly recommended — This project presents the design and construction of Battery Charger. A battery charger is an electrical/electronic device used to put energy into a secondary cell or rechargeable battery by forcing an electric current through it. The aim of the study is to design and construct a battery charger that can be use to charge any kind of 12v rechargeable batteries including alkaline, NiCad or lead acid batteries. In achieving this aim the following specific objectives were laid out as follows to: design a device that has the ability to indicate charging process, low battery and fully charge levels through LED indicators, and design a cheap, versatile and efficient lead acid car battery charger which will interest and appeal to the …
Can this topic “Effective Management of Loans and Advances” be used for Banking and Finance (BF) Project?
Yes it can be utilized for research — This research work on effective management of loans and advances in Nigerian commercial banks is aimed at guiding financial managers in the lending and credit administration of banks in the effort to effectively carry out on their functions. Secondary sources of data were the principal instruments used; the data used were presented, analysed and computed in tables for easy references. This study shows that effective management of loans and advances is the only way for banks to ensure liquidity, profitability as well as their going concern. Therefore appropriate ways and techniques for effective lending are stipulated and explained in the course of this study for easy assessment. Because it is a known fact that banks can only survive when its …
Is the topic “An Inventory Management System for Sports Equipment” recommended for Computer Science (CS) Project?
Yes it is highly recommended — An inventory management system is a software-based business solution used to simultaneously track sales activity and inventory. Computerized sales and inventory systems save time for businesses by speeding up transactions while raising accuracy. The aim of the study is to design and implement an Inventory Management System for Sports Equipment. In achieving this aim, the following specific objectives were laid out to create a database that will help store sports equipment sales records and develop an independent user application software. The motivation that led to the implementation of the proposed system is that the recording of sports equipment sales and cash received are done manually on the book that appears rough, inaccuracies in record keeping due to human errors and …
Can the material for “Design and Development of Online Doctor Appointment System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Doctor appointment scheduling system is an application software the enables doctors and other specialists to schedule appointments with their patients. The aim of the study is to design and implement an Online Doctor Appointment System. In achieving this aim, the following specific objectives were laid out to develop an application that will enable the care providers search and browse medical patient record without delay and store patient medical file record in a database that will enable care providers to be able to locate patient files in the health facility. The motivation that led to the implementation of the proposed system is that care providers waste precious time searching and browsing for unscheduled medical patient record to collect all information pertinent …
Can this topic “The Impact of Manufacturing Sector on the Nigerian Economic Development” be used for Economics Project?
Yes it can be utilized for research — This research work is geared at evaluating the effectiveness of manufacturing sector in promoting economic development in Nigeria. This is very essential in the Nigerian economy is characterized by GDP dependence on manufacturing output. Indices of exchange rate, capacity utilization, electricity supply and industrial output are hereby studied for the period of 1985-2007 with respects to the effectiveness of manufacturing sector in promoting economic development in Nigeria. A simple linear and multiple regression model was used for this project and criteria were examined. From the findings of this research work, it was observed that manufacturing sector constitute an integral part of the industrial base of any nation. They form the foundation on which the industrial sector of any nation must be …
Can the material for “Patterns and Prevalence of Psycho Active Substance use among Secondary School Students” be used as a guide for Public Health Project?
Yes it can be used — The study was carried out to determine the Prevalence and Patterns of Psycho Active Substance use among Secondary School Students in Dala Local Government Area of Kano State, Nigeria. In achieving this aim, the following specific objectives were laid out to identify the characteristics of students who use identified substances, identify the patterns of substance use and establish the prevalence of substance use among the senior secondary school students in Dala Local Government. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 200 (two hundred) respondents were selected for this study to represent the entire population of the study. For null hypotheses were formulated …