DESIGN AND FABRICATION OF A 12M3 MOBILE DEEP FREEZER
ABSTRACT
This write up is a detail of the process and information of plan for the physical realization of the construction of the 1M3 mobile deep freezer. It is divided into chapters, which discussed extensively the practical refrigeration cycle with full attention given to design factors working principle and choice of material. The method used in fabrication, assembly and driving the safety requirement was not left out.
CHAPTER ONE
1.0 Introduction
A mobile deep freezer is not a different deep freezer than a refrigeration that is portable (i.e can be moved from one place to another with little application has to be with the production and control of temperature lower than atmospheric. Thus refrigeration is the process of removing heat from a lower temperature.
By its nature heat from a body at a higher temperature to another at a lower temperature but the reverse is the case; it requires external energy to be accomplished.
The refrigeration is accomplished by various methods, such as the vapour compression system, absorption system and steam jet refrigeration cycle. In this project only vapour refrigerating compression system shall be discussed as it is the method used to accomplish to the raising of standards of living of all chastise of people.
Although refrigeration is primarily of thermodynamics but the advances made in refrigeration in recent years are the result of a team approach in which technicians, craft persons, engineers scientists and others from other phases of engineering pool skill and knowledge in the design, manufacture, application and operation of the refrigeration complete knowledge of thermodynamics and properties of refrigeration must be known before the complete cycle analysis can be made.
1.1 The Application of the Refrigeration Principle
The application of the refrigeration principle is limitless. The most common used and one that is readily recognized is the preservation of food. Almost all products in the home, on form in industries of in the laboratories are in some ways affected by refrigeration. Thus refrigeration has become an essential commodity in modern living as no family will afford to miss it.
1.2 Purpose of the Project
The objectives and purpose of the project is to achieve the following viz:
- To design and construct portable domestic cooling equipment that would improve on existing design taken into consideration.
- To design and construct a cooling system that is efficient with little or no complexity in maintenance.
- To design and construct cooling equipment that is economical, with a reduced height.
1.3 Benefits of the Project
Foodstuff can be preserved with the deep freezer for a very long time to avoid being spoilt before usage.
The design and fabrication of the mobile deep freeze has broadened our practical knowledge and we can be self reliance, if one may decide to go into production in the rear future and acts as a consultant. We can equally work efficiently without or with little guidance.
Electrical System in the Refrigerator
The power supply from the plug goes to thermostat, from it to the fuse (overload), from it to the common terminal of the relay of the compressor system using a compressor. in the 1850s there were much development on vapour compression systems and later the introduction of ammonia as a refrigerant enabled efficiency and reliability to be much improved.
In retrospect refrigerants themselves did more than anything to hold up the development of refrigeration some that are available that time were poisonous or explosive, or both other functions only at pressing so high as to acquire compressors and systems component to be constructed like battle ships, prime movers to noted, this gives a refrigerant a disadvantage. A break through was attained when Thomas Midgly and his associates discovered dichloride flour methane CECl2F2. In three days when tested, it confirm positive function of a refrigerant and it was code named R12.
The boom of refrigeration were then refracted by world war II but its end made manufacturing facilities available and there was a boom in refrigeration industries and its commercial outlets bigger and better and stores were needed at the docks certainly. Industries use refrigeration in making antibodies and cooling moved in machines churning out such diverse product as condles and golf balls.
The rapid expansion in refrigeration was accompanied by an almost equal dramatic increase, in air conditioning equipment sales to cinema and theaters, office buildings and bolds hospital air terminal buildings, departmental stores banks and shops, large and small. And the demand grew up for household goods.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Fabrication of a 12m3 Mobile Deep Freezer can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
- 1.0 Introduction
- 1.1 The application of the refrigeration principle
- 1.2 Purpose of the project
- 1.3 benefits of the project
- 2.0 Literature Review
- 2.1 Specification of the problem
- 2.2 Conditions for use
- 2.3 Characteristics of the project
- 3.0 Synthesis of Solution
- 3.1 Theory of Design and Analysis
- 3.2 Determination of C. O. P. Of Refrigeration
- 4.0 Construction and Material Selection
- 4.1 Description of Material Selection
- 4.2 Assembly of the work or project
- 5.0 Cost of Analysis
- 5.1 Conclusion
REFERENCES
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Fabrication of a 12m3 Mobile Deep Freezer" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
- 1.0 Introduction
- 1.1 The application of the refrigeration principle
- 1.2 Purpose of the project
- 1.3 benefits of the project
- 2.0 Literature Review
- 2.1 Specification of the problem
- 2.2 Conditions for use
- 2.3 Characteristics of the project
- 3.0 Synthesis of Solution
- 3.1 Theory of Design and Analysis
- 3.2 Determination of C. O. P. Of Refrigeration
- 4.0 Construction and Material Selection
- 4.1 Description of Material Selection
- 4.2 Assembly of the work or project
- 5.0 Cost of Analysis
- 5.1 Conclusion
REFERENCES
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Fabrication of a 12m3 Mobile Deep Freezer" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can this topic “Effect of Small and Medium Scale Business Enterprises on Economic Growth of Nigeria” be used for Business Administration and Management (BAM) Project?
Yes it can be utilized for research — This project has been able to carry out Small and Medium Scale business enterprises and economic growth. The research sample is randomly selected from De Eugene De-Rose Industry and Vono Product Plc by survey method composed of thirty (30) respondents. Chapter one looked at the background of the study (introduction), the statement of problems, objective of study. It also highlights research questions, statement of hypothesis, significance of the study, scope of the study, limitation of the study, history of the case study and definitions of terms. Chapter two was based on literature review and relevant texts on the subject topic. Chapter three outlined the research methodology used in conducting the research work. It indicates that this research work was carried …
Can this topic “Challenges of Human Capital Development in Nigeria’s Federal Civil Service” be used for Public Administration (PA) Project?
Yes it can be utilized for research — The study examined the challenges of Human Capital Development in Nigeria Federal Civil service under Goodluck Jonathan Administration (2010-2015), the study reviewed the contributions of Scholars and literature in fields of human capacity building; with particular attention to the training and capacity building in Nigeria Civil Service of the Federation, human capital theory was adopted for the study. Questionnaire were distributed, collated and analyzed with percentage and likert scale was used to analyse data generated from the study. four hypotheses were formulated and tested using chi square test, the result showed that the most outstanding challenges confronting Human Capital development in Nigeria Federal Civil service is inadequate budgetary allocation/training cost and lack of data on training needs/ uncoordinated training programmes, …
Can the material for “Design and Implementation of a Computerized Market Information System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — This research is intended to highlight the role of a computerized market information system for the Nigerian breweries located in 9th Mile Corner Ngwo as compared too the manual method of market. The research goes a long way to identify the various problems associated with the organization and possible solution to the problems as to boast market structure. Also to highlight an overview of market by numerous authors as the back bone of profitability. …
Can the material for “Availability, Access and Utilization of Information Communication Technologies Among Staff of Women” be used as a guide for Agricultural Economics and Extension Project?
Yes it can be used — The study determined the availability, access and utilization of information communication technologies among staff of women in agriculture sub-programme of agricultural development programmes in north central zone of Nigeria. Four states were randomly selected which include Benue, Kogi and Nassarawa states, and the Federal Capital Territory. The multi-stage sampling procedure was used to select a sample size of eighty (80) WIA staff. Interview schedule was used to collect data from the respondents. Frequency count, percentage and mean score were used to analyze the data collected. Factor analysis with principal factor model with interaction and varimax rotation was used to determine the major constrains to the use of ICTs. The result of the study showed the mean age of the respondents to …
Can the material for “Electronic Logbook for Students Industrial Work Experience Scheme (S.I.W.E.S)” be used as a guide for Computer Science Education Project?
Yes it can be used — The Students Industrial Work Experience Scheme (S.I.W.E.S) is an industrial training program for Nigerian university undergraduate students and other higher institutions. The aim of the study is to design and implement Electronic Logbooks For Students Industrial Work Experience Scheme (SIWES). In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will Provide opportunities to apply their knowledge to actual practice thus making the college work easier and Enable students to practice theory at school, and to provide access to the non-school production equipment. The motivation that led to the implementation of the proposed system is that the existing system there is unnecessary delay in the payment of students and supervisor allowance, …
Can the material for “Design and Implementation of Tariff Management Software” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Tariff management software system is the process of managing, organizing, billing and collecting of finances from an individual, sole proprietor and partnership business owner in a stipulated period of time. Tariff is a compulsory levy imposed on the income or profit of an individual, partnership and corporate organizations for the financing of government expenditure without recourse to a corresponding benefit from Tariff payer. Tariff management provides freeform creation of Tariff controls that will be applied to orders. This research work is aimed at appraising the Tariff collection system in Nigeria taking Federal Inland Revenue Service as a case study. It reviewed the old system, the reasons why a new idea muffed. The operations of the new method were also explained …
Can the material for “Determination of Degrading Ability of Fungi Isolated From Hydrocarbon Polluted Soil on Crude Oil Using Gas Chromatography” be used as a guide for Microbiology Project?
Yes it can be used — The study determines the Degrading Ability of Fungi Isolated from Hydrocarbon Polluted Soil. In achieving this aim, the following specific objectives of study were laid out to evaluate the bioremediation ability of diesel by fungi isolated from diesel contaminated soil, determine the Hydrocarbon and oil Utilization Potential, analyze the Hydrocarbon and Oil Degradation of Polluted Soil, and isolate and find out oil and hydrocarbon degrading fungi from oil and petroleum contaminated region of Ekiti State. Fungal hydrocarbon degradation is mostly an extracellular process, involving the release into the environment of active broad specificity oxidoreductase enzymes, such as laccases, manganese peroxidases and lignin peroxidases. Those fungal isolates were Aspergillus sp., Popularia sp., Geotrichum sp., Periconia sp. and one isolate was unidentified …
Can the material for “The Impact of the Global Economic Meltdown on the Achievement of the Millenium Development Goals in Nigeria” be used as a guide for Public Administration (PA) Project?
Yes it can be used — This research work is a critical analysis of the Impact of the Global Economic Meltdown on the Achievement of the Millennium Development Goals in Nigeria, with special reference to Ebonyi state. The study identified the impact of Global Economic Meltdown on some elected Millennium Development Goals in Nigeria, traced the historical background of the Global financial crisis, its implications on the Nigerian economy, the various features of the Global financial crisis. Based on data collected from the respondents who reacted on the questionnaire given to them. The study concluded that Global Economic Meltdown has a significant relationship with the Achievement of the Millennium Development Goals and that with total commitment to the targets, the Millennium Development Goals will be achieved …
Can the material for “The Role of Central Bank in Developing Nigeria Economy” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — This research work examined the role of Central bank in development of Nigeria Economy (1986-2010). Secondary data were used in this research work. The hypothesis was tested to examine the significance of relationship that exist between monetary policy tools, exchange rate and interest rate on economic growth in Nigeria. The analytical techniques used were the simple regression analysis while the student t-ratio was used for the test. From the test, it was observed that a positive relationship existed with negative relationship exist between the variables. Hence the researcher concluded that monetary policy is an efficient tool for economic growth in Nigeria. And therefore recommended that effort should be made to improve on the quality and the timeless of data generated …
Can this topic “Analysis of Twin Deficit and Manufacturing Sector of Nigerian Economy (1981 - 2015)” be used for Economics Project?
Yes it can be utilized for research — The study investigated the relationship between twin deficit and manufacturing sector of Nigerian economy for the period of 34 years (1981 to 2015). The study adopted the time series data using the OLS estimation technique to analyze the data. The model was estimated using a linear specification methodology. It was discovered Current account deficit and fiscal deficit exerts a negative and significant relationship with manufacturing output in Nigeria while Real Gross Domestic Product has a positive and significant relationship with manufacturing output in Nigeria. The study recommended that Government should endeavor to live within its means. Persistent budget deficit may lead to chronic current account disequilibrium which may further inhibit economic growth. Government must ensure that it pursues fiscal policies …