CONSTRUCTION OF PORTABLE WHEEL - BARROW
ABSTRACT
After detailed study on machines and levers, the construction work started as follows:
Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing. Detailed procedures carried out are located at the sequence of operation in subsequent pages.
The machine has scale of 1:5 in all parts of its dimensions. However, brief dimensions are given below:
- Upper surface of bowl — 850mm
- Inner surface of bowl — 335mm
- Stand height — 325mm
- Diameter of wheel — 250mm
- Diameter of shaft seating and the shaft 4mm
- Thickness of type — 75mm
The drawing of the project was done and enclosed at the end page of this booklet. At last, a 150kg capacity of conveying machine was constructed.
CHAPTER ONE
1.0 Introduction
1.1 Historical Background
Few centuries ago, the task of conveying loads around was so cumbersome. Very minor loads could be carried from one point of the other. The distances covered during the period of weak was less whereas the time expended on the short covered distance was much. Also, there were no appreciable accomplishment of words, there were continually loss of man-power as much effort and energy was spent on conveying loads.
Loads were carried on human heads which was generally unsafe.
Consequent upon these limitations, man started devising means on how loads could be carried from one point to another with ease. Before 13trh century, wheel-barrow was first constructed in china. The type of wheel-barrow then had its wheel under the cargo box. This conveyor helped the Chinese then to execute most of their works. But, yet, smaller quantity barrow due to the weak mechanical strength of material for continuation.
In 13th century proper an improvement on the type of wheel-barrow that were in China was constructed and used in Europe. This type had its wheel at the front of the machine on like that of the Chinese which had its wheel at the back of the cargo. These conveyors in those days could only convey less loads and could withstand less stress due to the deficiencies in the strength of the materials used for construction.
But, as time went on, there was and have been improvement and advancement in technology and there is how knowledge on how mechanical strength of construction materials can be improved thus, guaranteeing capability of machines to the function they are intended for.
1.2 Need For Constructing The Machine
The need of constructing this machine conveyor, arose as a result of difficulty being encountered daily on carrying of loads from points to points. By the construction of this conveyor, loss of man-power, money, time and difficulties encountered during load conveying is reduced.
- To establish a convincing fact in terms of technological acquired knowledge.
- To contribute to technological advancement of the society.
- To leave a legacy for the upcoming and prospective Engeers.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Construction of Portable Wheel - Barrow can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
- Introduction
- Historical Background
- 1.2 Need For Constructing The Machine
- Theory / Literature Survey
- 2.1 Types of Load To Be Carried By The Conveyor
- 2.2 Operation of the Wheel-Barrow
- 3.1 Equipments / Tools Employed During
- Construction of the Wheel-Barrow
- 3.2 Materials of Construction
- 3.3 Construction Procedure
- 3.4 Sequence of Operation
- 3.5 Design Calculations
- 3.6 Calculations Basic On The Bowl
- 3.7 Specifications
- 3.8 Project Drawing
- Costing of Portable Wheel-Barrow
- 4.1 Material Cost Analysis
- 4.2 Labour Cost Analysis
- 5.1 Discussion
- 5.2 Precautions taken during construction
- 5.3 Cautions to users
- 5.4 Recommendations
- 5.5 Conclusions
REFERENCES
Disclaimer for Complete Material Utilization
The displayed research work titled "Construction of Portable Wheel - Barrow" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
- Introduction
- Historical Background
- 1.2 Need For Constructing The Machine
- Theory / Literature Survey
- 2.1 Types of Load To Be Carried By The Conveyor
- 2.2 Operation of the Wheel-Barrow
- 3.1 Equipments / Tools Employed During
- Construction of the Wheel-Barrow
- 3.2 Materials of Construction
- 3.3 Construction Procedure
- 3.4 Sequence of Operation
- 3.5 Design Calculations
- 3.6 Calculations Basic On The Bowl
- 3.7 Specifications
- 3.8 Project Drawing
- Costing of Portable Wheel-Barrow
- 4.1 Material Cost Analysis
- 4.2 Labour Cost Analysis
- 5.1 Discussion
- 5.2 Precautions taken during construction
- 5.3 Cautions to users
- 5.4 Recommendations
- 5.5 Conclusions
REFERENCES
Disclaimer for Complete Material Utilization
The displayed research work titled "Construction of Portable Wheel - Barrow" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Is the topic “Design and Implementation of Online Post-UTME System” recommended for Computer Science (CS) Project?
Yes it is highly recommended — Registration for the Unified Tertiary Matriculation Examination, UTME, is organised by the Joint Admission and Matriculation Board, JAMB, for admission into tertiary institutions in Nigeria. This registration is conducted in all the states in Nigeria in a given period of the year. Many a times, the process is cumbersome, not organized and posses a lot of stress to students. So, the goal of this project is to provide a readily accessible and user- friendly system for students to register for UTME online and also to access the result of the examination online. This would be similar to other online registration forms, but it will also feature the following advantages; as a web-based system, students will be able to have access …
Can the material for “Development of the Domestic Airport Terminal” be used as a guide for Architecture Project?
Yes it can be used — The airport terminal is a building at an airport where passengers transfer between ground transportation and the facilities that allow them to board and disembark from the aircraft. Within the terminal, passengers purchase tickets, transfer their luggage, and go through security. The buildings that provide access to the airplanes (via gates) are typically called concourse. However, the terms terminals and concourses are used interchangeably, depending on the configuration of the airport. A functional airport passenger terminal is meant to ease the stress encountered by air passengers during the process of air travel. Therefore the architectural problem of the project is how best to provide an aesthetically pleasant, efficient, economical, bigger and more modern domestic airport passenger terminal, with good flexibility …
Can the material for “The Relationship Between Education and Socio-Economic Development” be used as a guide for Education Project?
Yes it can be used — This study attempted to investigate the effects of socio-economic status on student performance in commerce in educational district II in Shomolu Local Government Area of Lagos State. In this study related and relevant literature was reviewed. Also, survey research design was used in the assessment of the respondents’ opinion with the use of the questionnaire. A total of 200 (two hundred) students in five selected school were used as participants in this study. While the bio-data and research questions were analyzed with the use of the mean. At the end of the analysis, the following results were obtained: There is a significant difference between parental socio-economic status and students’ academic performance in senior Secondary Schools; and there is a significant …
Can the material for “Christian Religious Studies Students Life Style and Teaching Practice” be used as a guide for Christian Religious Studies Project?
Yes it can be used — Christian Religious Studies is one of the major subjects missionaries bequeathed to Nigerian education system when they established schools in the 19th century. The study examines the Christian Religious Studies Students Life Style and Teaching Practice in Nigeria. In achieving this aim, the following specific objectives were laid out to investigate the impact of Christian Religious Studies Students Life Style and Teaching Practice in Nigeria, examine the relationship between Christian Religious Studies and behavior of students, examine the challenges to effective teaching practice of CRS students, and suggest ways of curbing the challenges affecting the teaching of CRS students. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this …
Is the topic “The Impact of Information and Community Technology (ICT) on Teaching and Learning of Physics” recommended for Information Technology Project?
Yes it is highly recommended — This study investigated the impact of information and communication technology on teaching and learning of physics. The respondents used for the study were one hundred and fifty-seven (157) physics students and two (2) physics teachers drawn randomly from two senior secondary schools from each of the five educational districts out of the six educational districts available in Lagos State. Three null hypotheses were postulated and tested at level of significant. The instruments used for the study were information and communication technology impact on teaching and learning questionnaire (ICTIT LQ). The data collected were analyzed using simple percentage and chi-square. The research findings indicated that ICT have great impact on teaching and learning of physics. Also the introduction of ICT makes learning …
Can this topic “Solid Waste Management in Ogbete Main Market, Enugu” be used for Estate Management (EM) Project?
Yes it can be utilized for research — It is always known that cleanliness is next to godliness and health is wealth Good health is achieved if there is good management of the environment. The need for a good management of the environment cannot be over emphasized since there is a continuing environmental decay as a result of increased urbanization. Pollution is a major problem of urbanization of which most of the causes have been identified as industrial combustion, solid waste generation, oil spillage disposal etc. since these causes are inevitable; there is need for a good control of them. In this project there will be a critical look at solid waste management situation with special focus on Ogbete main market Enugu. The project, which is required for the attainment of …
Is the topic “Challenges of Human Capital Development in Nigeria’s Federal Civil Service” recommended for Public Administration (PA) Project?
Yes it is highly recommended — The study examined the challenges of Human Capital Development in Nigeria Federal Civil service under Goodluck Jonathan Administration (2010-2015), the study reviewed the contributions of Scholars and literature in fields of human capacity building; with particular attention to the training and capacity building in Nigeria Civil Service of the Federation, human capital theory was adopted for the study. Questionnaire were distributed, collated and analyzed with percentage and likert scale was used to analyse data generated from the study. four hypotheses were formulated and tested using chi square test, the result showed that the most outstanding challenges confronting Human Capital development in Nigeria Federal Civil service is inadequate budgetary allocation/training cost and lack of data on training needs/ uncoordinated training programmes, …
Can this topic “Design and Implementation of Online Task Management System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — The application that enables end-users to accomplish more objectives and receive higher grades in an organization is referred to as Task Management System. The aim of the study is to design and implement an Online Task Management System. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will explore the challenges being faced by the system and ensure that team’s ideas, files and conversations are in a single location. The motivation that led to the implementation of the proposed system is that security of data can be easily compromise and documents associated with different task may be accessed by un-authorized personnel. Other motivation issues are outline at the statement of …
Can the material for “The Impact of Monetary Policy on Banking Industry” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — Money is not neutral it is a contributing factor to the greatest economic problem any nation has to face the recurrent cycle of property and depression. It would be going to for to accuse money of being the cause of business cycles but without money business cycles as the know then would be inconceivable the simple exchange mechanism used in a barter economy could earthy get out of order an the way our highly complex financial machinery does just as business cycles (banks) could not exist without money so they could not exist without monetary policy to regulation its operations The aim of this work is to find out the impact of the monetary policy on the growth of banking industry …
Can the material for “Impact of Employees Motivation on the Impact of Change Management in Nigerian Banking Industry Organizational Productivity” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — The research topic of this study is the impact of change management in Nigerian Banking Industry, A study of United Bank for Africa (UBA) station Road, Enugu. The research was a descriptive research, the researcher made use of primary sources and secondary sources of data. The primary sources of data was obtained through questionnaire and oral interview while secondary sources was sourced through texts books ,journals and magazines The population of the study was seventy seven (77) employees. The sample size was 77 employees of the bank. The finding revealed among others that change management results to quality services. The researcher recommended among others that management should ensure effective communication link between management and workers before any change process is …