ASSESSMENT OF ANALYSIS AND CONTROL OF OVERHEAD EXPENSES IN MANUFACTURING INDUSTRY IN NIGERIA
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Assessment of Analysis and Control of Overhead Expenses in Manufacturing Industry in Nigeria can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Assessment of Analysis and Control of Overhead Expenses in Manufacturing Industry in Nigeria" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Assessment of Analysis and Control of Overhead Expenses in Manufacturing Industry in Nigeria" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Estimation of Organ Equivalent and Effective Doses From Diagnostic X-Ray” be used as a guide for Physics Project?
Yes it can be used — The radiation dose received by the patient during the radiological examination is essential to prevent risks of exposure.A study was carried out to establish the trend of dose received by patient during x-ray examination in Federal Medical Centre, Keffi in Nasarawa state, Nigeria. Entrance skin doses (ESDs) for a common type of x-ray procedures, namely chest AP/PA (anterior/posterior) were measured. A total of 200 data were collected from patients who were exposed to diagnostic X-ray during their routine chest X-ray examinations. The patent’s skin dose were determined using Edmond’s formula, which is based on the X-ray tube and the radiographic exposure parameters of kVp, mAS, SSD and the total filtration of the beams. The calculated mean skin dose ranges from …
Can the material for “Effects of Property Tax on Sustainable Housing Delivery in Nigeria” be used as a guide for Environmental Science Project?
Yes it can be used — Increasing demand for urban and rural infrastructures and dwindling revenue allocations in Nigeria have informed the Lagos State Government to promulgate Land Use Charge Law (2001) as a way of increasing internally-generated revenues through property tax. The Law stipulates a formula for assessing the Charge payable on properties in Lagos State, amongst other provisions. The aim of this paper is to determine the short- and long- term effects of the law on housing delivery which is one of thematic areas of Vision 20:2020 for Nigeria. A process of inferences was adopted to evaluate the law in addition to questionnaires administered on Estate Surveyors and Valuers within Lagos metropolis. The study found that the formula is inappropriate and that high tax and …
Can the material for “Design and Development of an Application for Online Classes” be used as a guide for Computer Science (CS) Project?
Yes it can be used — An online class is a course conducted over the Internet. They are generally conducted through a learning management system, in which students can view their course syllabus and academic progress, as well as communicate with fellow students and their course instructor. The rate of examination malpractice has increased and attention must be given fast to it before it ruins the education system of the country. The aim of the study is to design and implement a software that will facilitate Online Classes in Tertiary Institution. In achieving this aim, the following specific objectives were laid out to design an application that will provide alternative way of attaining education, implement a system which reduces examination malpractices, design an application that will …
Can the material for “The Role of Social Networking Sites on Political Campaigns in Nigeria” be used as a guide for Social Work Project?
Yes it can be used — The study looks at the role of social networking sites in political campaigns in Nigeria. It focuses on how politicians uses social networking sites to mobilize the youth to participate both in civic and political. Data were elicited through a well structured questionnaire simple percentage method and Pearson correlation analyses were employed. Finally, the study reaffirms the need for politicians to fully embrace social networking sites in Nigeria as a media for formulating good public policy and enhancing accountability in governance so as to ensure a “stronger” democracy. …
Can this topic “Design and Implementation of Academic Transcript Management System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — Students’ transcript is the summary of each of the two-year performance either in (OND) ordinary National Diploma or (HND) higher national diploma. The aim of this study is to design and implement an Academic Transcript Management System. In achieving this aim, the following specific objectives were laid out as follows to design and develop an application software that will record and reports of students will be easily retrieved with increased data security, and reduce in the amount of resources, which in turn will lower the cost of processing of student’s transcripts, since information will be stored in a database with reduced data Redundancy. The motivation that led to the implementation of the proposed system is as a result of the …
Can the material for “Awareness and Acceptance of Immunization Programs by Mothers of Children Within the Ages of 0 to 5 Years” be used as a guide for Midwifery Project?
Yes it can be used — The study was carried out to examine the Awareness and Acceptance of Immunization Programs by Mothers of Children within the Ages of 0 to 5 Years using Okada Community in Ovia North East Local Government Area of Edo State as a case study. In achieving this aim, the following specific objectives were laid out to examine the knowledge and attitude of mothers towards immunization against childhood killer diseases and determine whether the mother’s educational level influences the practice and acceptance of immunization against childhood killer diseases. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. Primary data were collected from the primary source which questionnaire was used …
Can the material for “The Role of Commercial Banks in Small Scale Entrepreneurship Development” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — The subject matter of this research work is to evaluate the extent to which Small Scale entrepreneurs in Enugu have been able to obtain loans and raise finance from Nigerian Commercial Banks as a major source of finance to the economy. The main objective of the study is to establish the role of Commercial Banks in financing Small Scale Enterprises (SSEs) in Enugu .A review of literature was done to ensure the conclusion of the study. Based on the analysis, Commercial Banks comply with the Central Bank of Nigeria (CBN) credit guidelines which stipulated that they should set aside 10% of their profit before tax for loan to Small Scale Enterprises (SSEs).Commercial Banks require feasibility report from SSEs before granting …
Can the material for “The Effect of Information Technology on the Productivity of a Secretary in Selected Business Organization” be used as a guide for Office Technology and Management (OTM) Project?
Yes it can be used — The study was carried out to examine the effects of information technology on the performance of secretaries in the front office. Survey research design was adopted in the study in order to assess the opinions of the chosen respondents with the use of 13 item questionnaire. Three research questions and hypothesis were raised to guide the study. Data obtained were analyzed using simple sample techniques, frequency and percentages while hypotheses were tested using Chi Square. The outcome of the findings showed that ICT application has impacted positively on the secretarial profession. It was also noted that the adoption of ICT has reduced the employment rate of secretaries and those employed stand the chance of retrenchment. Finally, it was also noted that …
Can the material for “Difficulty Areas in Senior Secondary School Biology Curriculum” be used as a guide for Education Project?
Yes it can be used — This study identified difficult topics in senior secondary school biology curriculum. Biology students and teachers in Ikwo Local Government Area of Ebonyi State of Nigeria were used for the study. Two research questions were formulated to guide the study. Two hundred students (200) and thirty (30) biology teachers formed the subjects of this study. There are twenty-two public secondary school in Ikwo Local Government Area out of which ten schools were selected for the study through simple random sampling technique. The researcher used mean and standard deviation to answer the research questions and the result of the study showed that the students find most topics difficult. Revelation from the study shows that some topics were perceived difficult by the teachers. It …
Can the material for “The Role of Artificial Intelligence in E-commerce Business” be used as a guide for Computer Science Education Project?
Yes it can be used — An Artificial Intelligence (AI) is an agent that is capable of identifying the state of an environment through its sensors and then it can affect the state through its actuators. The study was carried out to examine the Role of Artificial Intelligence in E-commerce Business. Investigation reveals that the modern economies are heavily dependent on the corporate form of doing business in both developed and developing countries. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 150 (one hundred and fifty) respondents were selected for this study to represent the entire population of the study. Primary data were collected from the primary source which …