
WEB BASED FINANCIAL AUDIT SYSTEM FOR A MANUFACTURING ORGANIZATION
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Web Based Financial Audit System for a Manufacturing Organization can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
![]() | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Web Based Financial Audit System for a Manufacturing Organization" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Web Based Financial Audit System for a Manufacturing Organization" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can this topic “The Role of Agriculture in the Economic Development of Edo State” be used for Agricultural Engineering (AE) Project?
Yes it can be utilized for research — The purpose of this research is to identify the role of agriculture in the economic development of Edo State: a case study of Oredo Local Government Area. Chapter one consists of the introduction aspect of the project. Chapter two comprises of the review of literature including the problem faced by the farmers of Oredo Local Government Area. Chapter three is the research methodology where data was obtained mainly from available published materials and this constitutes the secondary source data. The primary source includes the use of questionnaires administered to the farmers. Chapter four, the information collected were tabulated and analyzed. Finally some recommendations were made to the government for finding solutions to the problems facing agriculture in the economic development …
Is the topic “Perspective of Antenatal Mother Quality of Care Rendered in Primary Health Care Facilities” recommended for Midwifery Project?
Yes it is highly recommended — The study assesses the Quality of Care Rendered in Primary Health Care Facilities and the perception of patients at the antenatal clinic to know if it is accepted or not and the factors that influences their attitudes towards cesarean section. This aim of the study is to determine the Quality of Care Rendered in Primary Health Care Facilities and the Perspective of Antenatal Mother using Enugu State Primary Health Care as a case study. In achieving this aim, the following objectives were laid out to assess the perception of Antenatal Mother in Enugu State Primary Health Care Service, determine the attitude of health care worker towards Antenatal Mother, assess the possible factors that influence their perception and attitude of Antenatal …
Can the material for “The Effective Marketing Communication as a Tool for Greater Productivity in Organization” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — This work is aimed at critically examining effective marketing communication as a tool for greater productivity in an organization a special reference to union bank Nigeria Plc eastern area was used as a case study. Literatures related to the subject were reviewed. primarily and secondary data were collected through the use of questionnaire interviews and form text journals and the company’s record that face to face marketing communication is not common between the top management and the subordinate. For communication to be effective in the organization the following factors must be observed and maintained. Management must develop good communication skill, a common language should be used for better understanding of marketing communication intents, subordinates views should be sought before making …
Can the material for “Investigation Into the Adoption of Knowledge Management (KM) in the Nigerian Industry Construction Industry” be used as a guide for Quantity Surveying (QS) Project?
Yes it can be used — The study was carried out to investigate the Adoption of knowledge management in the Nigeria construction industry. The research examined the area of the construction industry that will improve as a result of the contribution of knowledge management. Data for the analysis were collected through questionnaire Administration on construction professionals. 60questionnaires where administered, 50 were retrieved and analysed using simple percentile and relative Important index. The study revealed that the knowledge management adoption is being hindered the most in Nigeria by some major barriers which include funding with relative important index of 0.83, lack of cooperation among professionals with relative important index of 0.81, difficulty in generalizing and sharing knowledge with relative important index of 0.81 and the least barrier being …
Is the topic “Relative Impact of Financial Sector Reforms on Agricultural and Manufacturing Sector Growth in Nigeria” recommended for Economics Project?
Yes it is highly recommended — The study investigates relative impact of financial sector reforms on agricultural and manufacturing sector growth in Nigeria. To guide the study, Ordinary Least Square technique was adopted and Eviews 8.0 econometric software was utilized for the analysis. A time series quarterly data sourced from Central Bank of Nigeria Statistical Bulletin 2009 and 2013and it covered the period 1970-2013 was used for the analysis. After carrying out necessary pre- and post diagnostic test, the result shows that gross fixed capital formation and credit to private sector ratio to GDP has positive but insignificant relationship with agricultural and manufacturing sector output. While real interest rate, manufacturing capacity utilization and financial sector reform dummy were positive and significant, interest rate spread, real exchange, average …
Can the material for “The Need for Improved Customer Services in the Banking Industry” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — The business organization operates in an environment and through its interactions with the various elements of this environment, it justifies its existence. The customers is the essences of business. The business organization is expected to continually to satisfy it customer hence this work gets out to investigate the need for improved customer services in the banking industry with particular reference to union Bank of Nigeria PLC The method applied in this study is a combination of content analysis and survey research the data were sources through both instrument used availed the research the opportunity to have a first hand information. The method applied in this study is a combination of content analysis and survey research the data were sources through both primary …
Can the material for “An Investigation Into the Relationship Between Teaching Methods and Academic Performance of Senior Secondary School Students” be used as a guide for Education Project?
Yes it can be used — Teaching Method is a teaching device or strategy adopted by a teacher to teach a lesson that stimulates learning. The study was carried out to investigate the Relationship between Teaching Methods and Academic Performance of Senior Secondary School Students in Nigeria. In achieving this aim, the following specific objectives were laid out to assess the relationship between the use of teaching methods (discussion method, demonstration method, lecture method and questioning method) and academic performance of students. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 133 (one hundred and thirty three) respondents were selected for this study to represent the entire population of the …
Can the material for “Motivation as a Means of Enhancing Staff Performance in an Organisation” be used as a guide for Industrial Relations and Personnel Management (IRPM) Project?
Yes it can be used — The task of motivation, the work force of an organization is to achieve maximum productivity. This is one of the most challenging functions of management. It deals with human behaviour. The manager needs some understanding about why people behave the way they do, so that they influence people to work hard the way the organization finds it desirable. Motivation is a voluntary willingness of an employee to render services without bribery or compulsion. That is, motivation is out of sheer of the employee and the will to perform is sustained continuously. This study focuses on the effect of motivation on job performance. Three hypotheses were put forward and tested using the chi square method, all tested positive giving the notion that incentives …
Can the material for “Need for Efficient Stock Control in a Small Scale Industry” be used as a guide for Purchasing and Supply (PS) Project?
Yes it can be used — This study was conducted to guide people mainly (firms and students) on effective stock control system in any organization like Nigeria Breweries Plc there is need for efficient stock control especially in manufacturing for the establishment to grow. The data of this project was collected through secondary source and personal interview and questionnaire (purchasing manager and other managers) from this work was gotten and it was analyzed.With all this information the need for efficient stock control system in small scale industries like Nigeria Breweries Plc can be gotten from this project. …
Can the material for “The Design and Construction of Auto Cut-Off Car Battery Charger” be used as a guide for Electrical / Electronics Engineering (EE) Project?
Yes it can be used — This project which comprise of many chapters that deals extensively with designs and construction of battery charger with auto-cut off which is capable of charging a 12 volts battery. In this construction research, designs was carried out which historic research was used to break down and evaluate to a low level understating of what an auto-cut of charger system is all and how it can be constructed and the main purpose of the project. The charging current as well as the power to the circuit is obtained from 1 0 — 18 volts 2 Ampere step down transformer. The law voltage AC can be rectified by the bridge rectifier comprising D1 through D4 and made ripple free by the smoothing capacitor …