THE NEED FOR QUALITY DEPARTMENT AND CONTROL IN A MANUFACTURING INDUSTRY
ABSTRACT
This research work appraises “the need for quality determination and control in a manufacturing industry” The research identifies the need objectives and significance of quality determination and control and also the problems which manufacturing industry encounters in determining quality in a product. It identifies the role quality determination plays in the production sector the main aim of every producer is to produce goods with good quality that can be bold for a profit because good quality improves the development of the company. It also prove to the manufactures that a quality product is an asset to the form. in the sense that consumer are after good quality product.
CHAPTER ONE
Introduction
1.1 Background of the Study
The main aim of every company/industry is to produce goods and services with good quality that can be bold for a profit. This could be achieved if only these products are manufactured in large quality in order to satisfy the basic needs of the consumers, because good quality improves the development of the industry.
Nigerians does not recommend locally made goods as good as those made abroad. To see the best quality in goods, some companies assigned quality control responsibility to various departments. The need for this good quality products is not new neither did it start in this point in time it started from our forefathers during the area of industrial revolution to prove the fact that some products produced were demanded more than others.
The good quality control cannot be our looked due to the danger associated with poor quality products. Poor drugs causes death or deformities.
Again the quality of the product cannot be regarded as a good quality unfill proper inspection made by the quality control and inspection department both on physical and technical aspects or knowledge.
Many organizations includes the purchasing department because of procurement of raw materials and their cost consciousness in the quality determination and control functions. Now the researcher would address their mind on the definition and explanation of quality in order to enable both producers and customers understand the subject matter of this researcher project.
According to Shubin (1957:34) been product quality as composition strength, shape, dimension, workmanship, colour and finish.
To make this more understandable, it will be wise to explain what quality determination and control stands for. Lee et al (1979:42) words sated on two major consideration.
- The technical consideration of suitability
- The economic consideration of price and availability
Here, the engineering join the sales and production to see the suitability of a material while purchasing based on the economic consideration which based on source and price of material.
The basic concern of the researcher is to know who determines and controls quality in a manufacturing industry and the purchasing work. And also to address the mind on how product quality can be controlled and improved in the manufacturing industry.
A quality product is an asset to the firm. Quality has been one of the hot topics in the 1989 is and 1990's there has been efforts to increase quality and decrease cost. As global competition intensifies for large and small business more intensifies calls for quality. Quality is the most powerful weapon of a manufacturing industry.
Surveys shows that a high percentage of consumers are willing to pay for quality. Poor quality products results to loss of customers and loyal suits for damages caused by injuries from products.
1.2 Statement of Problems
Now consumers and always after good quality products. The satisfaction of the consumers is the main focus of every manufacturing industry/ organization through market report in the production of the goods with quality has more demand in the market. Most times poor quality products causes ineffective production and the success of an organization/ industry lies upon immediate supervision in the production sector since they are sole responsible for directing it towards the goods.
According to Osuala (1987:68) the statement of research problem serves to elaborate upon the information in the title of the study. This study is concerned with quality determination and control in a manufacturing industry. Below are the important problem question for this study:
- Does the product confirm to specification?
- Does product confirm to the targeted standard?
- Is the net weight of the product up to the requirement?
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
The Need for Quality Department and Control in a Manufacturing Industry can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "The Need for Quality Department and Control in a Manufacturing Industry" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "The Need for Quality Department and Control in a Manufacturing Industry" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Is the topic “Assessment of Modern Instructional Resources Needed for Skills Acquisition among Business Education Students in Tertiary Institution” recommended for Entrepreneurship Project?
Yes it is highly recommended — Skills acquisition refers to ability to be trained on a particular task or function. The study assesses the Modern Instructional Resources Needed for Skills Acquisition among Business Education Students in Tertiary Institution. In achieving this aim, the following specific objectives were laid out to determine the effect of poor communication skills on the Performance of Business Education Students and identify the effect of communication process and information technology among Business Education Students in Tertiary Institution. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 200 (two hundred) respondents were selected for this study to represent the entire population of the study. For null hypotheses …
Can the material for “The Impact of Leadership Style on Employees’ Performance” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — This project work is primarily covered with Leadership Style and their impact on employee performance. A case study of Total Nigeria Plc Kachia Road, Kilometer 16 Kaduna South, Kaduna. The first part of the project work introduces the reader to what extent leadership style have on employee productivity with background of the subject matter, the significant, objective and scope of the subject matter. Secondly, the researcher review the works of past writers on the subject matter, the definition of terms area covered by the study. Thirdly, it considers the method the researcher used in gathering necessary information for the study; questionnaire was employed as appropriate instrument for the study. The researcher population was 200 individuals which consist of sales department, …
Can the material for “A History of Agricultural Development Project (1987 - 2000)” be used as a guide for History Project?
Yes it can be used — This study has examined the history of Kaduna State Agricultural Development Project (KADP) in Kaduna State. The study found out that the activities of KADP have impact on lives of the Kaduna State indigenous farmers who were known to be traditional farmers. They heavily relied on subsistence farming for a couple of centuries. However, the emergence of the KADP in 1987 brought more agricultural changes in their lives as it introduced new agricultural programmes that improved the harvest yields in the area. More interestingly by the year 2000, the KADP programmes have improved the standard of living as well as general socio-economic activities of the agrarian communities in Kaduna State.However, this development was mainly achieved due to the involvement of …
Can this topic “Design and Implementation of an Online Prison Management System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — Prisoners’ management in Nigeria has long been a neglected area and has only recently been included in the 20-20 vision document under the e-governance. Currently, prisoner’s records are maintained in a very rudimentary way in the form of manual files and registers. This method of data management often results in human error, delay to retrieve information etc. Thus, An Online Prison Management System was designed and implemented to manage prisoner’s records for the Nigerian prison service Enugu command. This project was done using basic html for visible web contents, php for server scripting and MySQL database was used to store and manage the prisoner’s records. Tools used to achieve this Project includes Dreamweaver CS5 html editor,CSS3 for styling, JavaScript, php …
Can the material for “Bacteria in Peak Milk” be used as a guide for Science Laboratory Technology (SLT) Project?
Yes it can be used — The study examines the bacteria in peak milk. In achieving this aim, the following specific objectives were set out to; determine the Proximate analyses of the imported milk agar and compounded milk agar with various protein sources, tassess the microbiological examination of peak milk Isolation of Bacteria from peak milk, and examine of Total Bacteria, and Coliform Bacteria from peak milk. Peak Milk is a rich source of macro and micronutrients. Milk can be classified based on the types of treatment they undergo, which include raw milk (unpasteurized), market milk (pasteurized fluid milk), dried milk powder and concentrated milk such as unsweetened condensed and sweetened condensed milks. Investigation reveals the problems of the bacteria in peak milk research work; a …
Can the material for “Design and Implementation of Cancer Prediction using Naive Bayes” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Cancer prediction is the identification of individual or clusters of predictive genetic alterations might help in defining the outcome of cancer treatment, allowing for the stratification of patients into distinct cohorts for selective therapeutic protocols. The aim of the study is to design and implement a Cancer Prediction using Naïve Bayes. In achieving this aim, the specific objectives were set out to design an system that allows the early detection of cancer, produce prompt and accurate result from test carried out in the hospital, and help in solving the problem of cancer detection. Investigation reveals the problems of the Cancer Prediction using Naïve Bayes: the presently practiced prediction at the hospital does not allow early detection of cancer, lack of …
Can the material for “Design and Implementation of a Computerized Library Stock Control System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — A library management system software package is designed especially to handle book-keeping tasks and students entry and exits period. The aim of this study is to design software that will Design and implement a Computerized Library Stock Control System. In achieving this aim, the following specific objectives were laid out to Control the inflow and outflow of stock/materials in the library, store books using IDs assigned to each book, assist in the management and record library stocks and give account of borrowed and un borrowed books. The motivation that led to the implementation of the proposed system is as a result of poor determination books due and overdue, lack of comprehensive database for book stocked in the library and verifiable …
Can the material for “Design and Construction of 50Watts Audio Amplifier” be used as a guide for Electrical / Electronics Engineering (EE) Project?
Yes it can be used — An audio amplifier is an electronic device that amplifies low-power audio signal (signals composed primarily of frequencies between 20 and 20 kHz) to a level suitable of driving loudspeakers and in the final stage in a typical audio playback chain. The study was conducted to design and construct an audio amplifier that will deliver appreciable power of 50W to a load (speaker). In achieving this aim, the following specific objectives were laid out to assess the wiring and configuration of transistors in the existing 50watts Audio Amplifier, evaluate the operation of the existing 50watts Audio Amplifier and analyze the circuit diagram of the 50watts Audio Amplifier. This device is designed to deliver appreciable power to the load. Audio Power amplifiers …
Can this topic “The Effect of Cost of Construction and Property Development” be used for Estate Management (EM) Project?
Yes it can be utilized for research — Construction cost and property development in Nigerian has turn out to be a serious issue as the cost at which material are raised to makes it difficult for a simple Nigerian man to embark on construction work or property development project. Therefore, this research work aims at discovering the effects of the cost of construction among the Nigerian citizens. And seek solution on how this cost can be reduced by a high number percentage. This research work makes use of survey design method to carry out this research work, and a total number of seventy (70) respondents where used, and the data obtained was analyze using the SPSS package. …
Is the topic “The Effect of Training and Development on Employee Commitment” recommended for Business Administration and Management (BAM) Project?
Yes it is highly recommended — The study examined the training and development on employee commitment in Zenith Bank Plc, Nigeria. The study employed the survey design and the purposive sampling technique to select 450 staff across management, senior and junior level. A well-constructed questionnaire, which was adjudged valid and reliable, was used for collection of data from the respondents. The data obtained through the administration of the questionnaires was analyzed using the Pearson correlation analysis. The results showed that there is a positive and significant relationship between Mentoring has significant effect on employee commitment (r=0.772; p<0.05)., Also, a positive and significant relationship exists between Job Delegation and employee commitment (r=.896; p<0.05)., Furthermore, a positive and significant relationship exists between Job Empowerment and employee commitment (r=.896; …