THE IMPACT OF VALUE ADDED TAX ON THE PRODUCTIVITY OF MANUFACTURING ORGANIZATIONS IN THE NIGERIAN ECONOMY
CHAPTER ONE
1.0 Introduction
1.1 Background Of The Study
The federal government in 1991 set up a study group to look into and give recommendation of the administration and reform of indirect taxation. This was as a result of the inadequate revenue yield from non-oil taxes in Nigeria and the overdependence of the government on oil revenue. This group was to review the indirect taxation system in Nigeria, study the feasibility of the introduction of Value Added Tax and make recommendation.
According to Ajakaiye (2000) the recommendation accepted by the government included the following:
- Detailed action programme for the preparatory work on VAT
- When introduced, VAT should pay special attention to the government’s fiscal relationship because it will replace sales tax which is a stage tax.
- Have a single rate.
- Cover manufacturing industry importers in form of goods.
- Cover professional services excluding doctors and pharmacists.
Sales tax was the basic consumption tax by many countries. At the dawn of the 20th century, many countries embrace VAT as a replacement sales tax. The substitute of VAT for sales tax paid off tremendously though at varying degrees to various countries. The adoption of VAT was so pervasive that the adoption of it by European Economic Community (EEC) was made obligatory under the treaty of Rome signed in 1957. In spite of the wide acceptance, some countries like Japan, Australia and Canada have been reluctant of introducing the VAT.
The Standard Statement of Accounting Practice (SSAP) NO 5 (1993) defined VAT as a tax on the supply of goods and services which is eventually borne by the final consumer but collected at each stage of production and distribution.
Professor Aluko (1993) in his paper ‘Classical Value Added Tax (CVAT)’ defined VAT as a tax on the increase in the value of goods and services in the process of production and distribution.
Ayodele (2007) argued that VAT has become a major source of revenue for most developing countries like Nigeria. In view of this, there is penchant to increase the tax rate to get higher revenue.
First Tax Guide (2005) stated that the revenue from VAT was shared 20-80 percent between the state and federal government. Currently, it is shared 15:50:35 among the federal, state and local government. The state collection was to be earmarked as 30% for state of origin, 30% for consumption/destination and 40% for equality of the state. VAT is levied at a single tax rate of 5% which makes it easier to administer. When paid by business on purchase, it becomes an input tax which is recoverable from VAT charge on company’s sales known as output tax.
In Nigeria, all goods and service are vatable with limited aid specific exemptions. All imports are vatable with imported raw materials or finished goods and VAT on imports are calculated on total revenue value at the total cost, insurance and freight. Exports are zero rated, implying that exporters do not impose VAT on exports, but they can claim credit for VAT paid on their inputs.
According to Ajaikaiye (2002) Nigerian VAT has a very wide base with relatively few exemptions, moreover VAT does not replace any of the usual indirect or income taxes. Sales tax revenue accrues exclusively to the state government, but shared by all levels of government. Thus, it can be assumed that VAT revenue is shared by all the levels of government. Though VAT revenue is not sterilized, it is injected into the economy through government final consumption expenditures.
1.2 Statement Of The Problem
Resistance to VAT in Nigeria at the early stage was very intensive and prolonged, in the sense that some manufacturing organizations do not want the tax, they felt that its implementation should not be given to any revenue agency. In the thrust of this it was argued that the VAT implementation would almost certainly be based on bureaucratic red-tapism (Ogundele, 1996).
Naiyeju (1996) identified a spectrum of fear inherent in the introduction of VAT in Nigerian economy;
- Anticipated high administration cost, especially the cost of monitoring the VAT implementation bearing in mind the Nigerian factor.
- The established culture of tax evasion by some manufacturing organizations.
- Effects on prices of commodities.
- Fear of inability to administer VAT efficiently.
- Compliance cost.
1.3 Objectives Of The Study
The following are the objectives of the study;
- To examine how VAT has influence the productivity of manufacturing organizations in the Nigerian economy.
- To analyze the effects of VAT revenue in the GDP of the Nigerian economy.
- To determine how the productivity of manufacturing organizations in Nigeria has enhance the GDP of the Nigerian economy.
- To enumerate goods and services covered by VAT and those exempted from VAT.
1.4 Research Questions
- How has VAT influence the productivity of manufacturing organizations in the Nigerian economy ?
- Is there any significant relationship between VAT revenue and the GDP of the Nigerian economy?
- Does the productivity of manufacturing organizations in Nigerian enhance the GDP of the Nigerian economy?
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
The Impact of Value Added Tax on the Productivity of Manufacturing Organizations in the Nigerian Economy can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.0 Introduction
- 1.1 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "The Impact of Value Added Tax on the Productivity of Manufacturing Organizations in the Nigerian Economy" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.0 Introduction
- 1.1 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "The Impact of Value Added Tax on the Productivity of Manufacturing Organizations in the Nigerian Economy" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Empirical Analysis of Problems of Petroleum Products Distribution in Nigeria” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — The study assessed the Problem of Petroleum Product Distribution in Nigeria. As such, the research questions that guided this study are: What are the constraints militating against Nigeria’s state owned refineries and petrochemical plants as well as affiliated regulatory agencies in Petroleum product distribution? What are the problems associated with the distribution of petroleum product in the downstream sector? 120 respondents were selected using the random sampling technique to select 50 independent petroleum product marketers, 50 staff from PPMC and 20 staff from NNPC and 20 staff from NNPC. The mean (X) was used to analyze the data while chi-square was used to test the hypotheses. The analysis shows that the frequent pipeline vandalization, poor maintenance of petroleum infrastructure, as …
Can the material for “Working Capital Management in the Banking Sector: Banking Finance Projects” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — Working capital is known to be the background and life wire of any business organizations in every part of the world. This makes it imperative that there should be efficient working capital management, to help in reducing constant incidents/cases of banks distresses (i) Banking industry since this has been a source worry to the users of financial statements. Consequently this project has attempted to give an expository discussion on the management of working to enhance the continuity industry to enhance the continuity of banking industry, with a particular interest in united bank for Africa plc Surulere, lagos. It thus gave hits on how bank managers should manage financial distress banks where such signs of distress situations tries to occur. Conclusions arising form …
Can the material for “Guidance Services' Effect on Secondary School Students” be used as a guide for Guidance and Counselling Project?
Yes it can be used — Student guidance service is the assistance rendered to an academic student in making him or her understand himself and what is capable of doing. The study was carried out to investigate the Effect of Guidance Services on Secondary School Students. In achieving this aim, the following specific objectives were laid out to find out the impact of guidance services in secondary school students and investigate the personality factors that affect guidance services among students in Oshimili Local Government Area. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 150 (one hundred and fifty) respondents were selected for this study to represent the entire population …
Can this topic “The Knowledge and Practices of Birth Preparedness and Complication Readiness” be used for Midwifery Project?
Yes it can be utilized for research — Birth preparedness and complication readiness (BP/CR) is a comprehensive package which is focused at promoting timely access to skilled maternal and neonatal services. This aim of the study is to determine the Knowledge and Practices of Birth Preparedness and Complication readiness among Pregnant Women in the Primary Health Care Facilities in Ado-Ekiti. In achieving this aim, the following objectives were laid out as follows to: determine knowledge regarding birth preparedness and complication readiness of mothers in Ado-Ekiti, find out the association between knowledge regarding birth preparedness and complication readiness and place of delivery, and evaluate the knowledge on Birth Preparedness and Complication readiness and obstetric danger signs. The research design used in this report is descriptive design, utilizing questionnaire method …
Can the material for “Print Media Reporting of Taxation Issue in Delta State” be used as a guide for Mass Communication (MC) Project?
Yes it can be used — The study was carried out to scrutinize the print media reporting system on taxation issue in Delta State using Ughelli North Local Government Area as a case study. In achieving this aim, the following specific objectives were laid out to establish the prominence given to stories on taxation by the print media and investigate the challenges confronting print media reporting system of taxation in the area under review. Investigation revealed that Despite the challenges faced by print media in Nigeria is that only a few publishers had access to printing press, when printing was the only medium available to journalists, but online journalism has given journalists the opportunity to reach their audience simultaneously. The research design used in this report …
Can this topic “Four Bedroom Senior Staff Quarters Design and Construction with Facilities” be used for Art and Design Project?
Yes it can be utilized for research — This project research is examine the effective direction of a proposed four bedroom senior quarters with facilities, the building identifies the various processes and stages that are involved and the stage of planning and execution which involves viability and feasibility study, including soil and site analysis, step plan and architectural working drawing, writing of construction programmed, and taking off, the use of the above documents in respect with its processes of actualization analysis inclusive the processes of planning and controlling with the construction site. …
Can the material for “An Evaluation Into the Nature Problems and Prospects of the New Products Developed in the Banking Industry 1990 – 2003” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — This research studied the evaluation into the Nature, problem and prospect of the New product developed in the banking industry from 1990-2003. In this research work, the researcher choosed four of the products and measures the extent to which they have been able to satisfy the customers. The product selected are, SMART CARD, INTERNATIONAL MONEY TRANSFER, EDUCATIONAL SCHEME AND INTEGRATED NET WORK TRANSACTION. Data for this research were collected though questionnaire and interviews by bank customers and the review of existing literature on the topic using simple random procedure and the descriptive method of research. The data so collected were analysed using the simple percentage and the formulated hypothesis were tested with chi-square (X2) method. Some of the findings are, the nature of …
Can the material for “An Assessment of the Effect of Family Structure and Motivation as Predictors of Student Academic Achievement” be used as a guide for Education Project?
Yes it can be used — This study focused on the effects of family structure and motivation as a prediction of students’ academic achievements of university of agriculture Makurdi. Benue state. It was a survey research design with four research questions guiding the study. The instrument used in data collection is questionnaire and it was validated by the supervisor and three (3) experts in the department of science education. Using random sampling 368 students were drawn from three colleges in the University of Agriculture Makurdi. Data analysis was done using the mean and standard deviation. The form of hypothesis formulated were tested at 0.05 level of significance. The result showed that there is a significant difference between the academic achievement of students from single parent family and …
Can the material for “Factors Affecting Effective Spoken English Among Secondary School Students” be used as a guide for Education Project?
Yes it can be used — The study investigated the factors affecting effective spoken English among secondary school students in Jalingo metropolis, Taraba state. Specifically, the study sought to identify the problems that students of Jalingo metropolis encounter when they get to speak English, determine the factors that affect spoken English among the students and to determine the extent the frequent use of English affects spoken English among secondary school students in the study area. A survey research design was adopted for the study. Also, general observations was recorded. Target population for the study consisted of all the senior secondary two (SS2) students and teachers, which was 16032 students and 325 teachers from 62 Government approved secondary schools in Jalingo Local Government Area of Taraba State. …
Can the material for “Creche Online Payment and Registration System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — The aim of the study is to develop an online payment and registration system for crèche students that will serve as a more efficient alternative to the current crèche student payment and registration process. The motivation of the study is the need to increase the efficiency of attending to registrants in order to reduce the time, cost and stress associated with the current process. In analyzing the existing system, the following problems were identified; The current system requires that students must form long queues at all times before they are attended to, the current system keeps the screening officer under constant pressure and this could lead to mistakes, much time is taken to attend to a single student during the …