THE DESIGN AND FABRICATION OF AUTONOMOUS POLYMER-BASED
CHAPTER ONE
1.0 Introduction
In recent days, in our industrial sectors such as ceramics and biscuit industry, it is widely used for making of biscuit, flouring for baking of bread, and corn Mill. Infect to summers all these, junked food that are baked in supermarket today are mostly involves corn in making them. With the aid of this, it has created availability of corn Sheller (steeling machine) even in the market which indeed removed our difficulties and impossibilities when using and engaging with the modern method of design.
In the light of this as technology advances forward, on introduction of this machine (Sheller) made manifest and come into existence which is more stressless, easy to operate, low costing and time reduction with high degree of production volume and efficiency modifications have also been made it possible to be manually and electro — mechanical operated types depending on the choice of design and the speed of shaft required.
As a prelude to other parts of this study, this chapter will discuss the background upon which this study was initiated, the statement of problems that led to this study, the Aim and Objectives of the study. Others are Significance of the study, Scope of work, Research hypothesis and questions, Limitation of the study and Definition of technical terms.
1.1 Statement of Problem
Investigation revealed that there is cumbersome and difficult method of hand shelling, which encourages time consuming, and human stressfulness. Corn otherwise known as “Oka” in Igbo tribe is mostly used seed across all the tribe in country today. It is widely used in homes, hotels and schools for eating and seeding process (when dried). It is therefore hardly to see any Nigerian who has not tested it in one way or the other. Now, since it is very imperative for dieting inclusively, it can be refined to form varieties of food supplementary diet such as making of Akamu (pap), semuviter corn powder and corn mill.
1.1 Aim and Objectives of the Study
The aim of the study is to design and fabricate an Autonomous Polymer-Based. In achieving this aim, the following specific objectives were laid out as follows:
- To design and fabricate corn sheller which easy to operate with high degree of efficiency
- To design and fabricate a machine (corn Sheller) that would save time and cost, with high degree of production volume.
- To design and construct a corn Sheller that would not have much breaking effect of grains, leaving the cob's intact during the process.
- To design and constrict a corn Sheller that is economical and have little or no complication in maintenance
- To design and construct a corn Sheller with high percentage at local technology
- To design and construct a machine that is cost effective and manual stress reduction
1.2 Importance And Specification Of The Project
The importance attached to this design is the facilitation and the production of voluminous corn Sheller without much time and without recounting much breakage of the grains of the corn in shortest possible time.
The specification was obtained considering the items or component used and the hopper and barrel dimensions put into consideration as well.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
The Design and Fabrication of Autonomous Polymer-Based can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "The Design and Fabrication of Autonomous Polymer-Based" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Learners’ Beliefs and Conceptions About the Role of Mathematics in Physics” be used as a guide for Mathematics / Physics Project?
Yes it can be used — Mathematics is an essential part of what we call physics. It plays an important role in physics research as well as in learning physics. It can be a useful tool or a barrier too high to overcome for some of our students. Only recently this aspect of learning physics has been given more attention. The study presented here makes a contribution to this field of research by providing a first view on students’ conceptions about the role of mathematics in (learning) physics. These beliefs are functioning as filters for perception and processing and therefore have an important impact on our students’ learning processes. To know about students’ conceptions can inspire teachers to create more adequate learning environments for our students and …
Is the topic “Design and Construction of a 500watts Uninterruptible Power Supply” recommended for Electrical / Electronics Engineering (EE) Project?
Yes it is highly recommended — The study was conducted to design and construct a 500 Watts Uninterruptible Power Supply with Voltage Low Indicator (Inverter). As new ideas unfold and technology become advanced with business increasingly being dependent on technology for their fundamental operation; the need for system availability is of paramount importance. Uninterruptible power supply (Inverter) maintains continuous supply of electric power to certain essential equipment that cannot be shut down unexpectedly. They are generally associated with telecommunication equipment, computer system and other facilities such as airport traffic controls system where even brief commercial power interruption could cause injuries or fatalities, serious business disruption in data loss. The 500watts Uninterruptible Power Supply (UPS) is designed to be used in such situation. With its conversion design, …
Can the material for “The Impact of Drug Abuse on Senior Secondary School Students” be used as a guide for Public Health Project?
Yes it can be used — Drug abuse has a negative impact on the education of undergraduates in different schools across the globe. Such drugs were used to relieve pain or cure and control diseases. Drugs is any substance which taken by living organisms may modify the functions of living organism. The study was carried out to examine the Impact of Drug Abuse on Senior Secondary School Students. In achieving this aim, the following specific objectives were laid out to identify the most commonly abused substances and the factors that contribute to the use of these substances and find out the knowledge and perception of the health risk and other implications of drug use among students. The research design used in this report is descriptive design, …
Can the material for “The Effects of Job Design on Worker’s Performance” be used as a guide for Human Resource Management (HRM) Project?
Yes it can be used — Job design is important to an organization because the way job are structured designed or coordinated has direct and significant impact on the performance of the organization. The aim of the study is to investigate the Effects of Job Design on Worker's Performance. In achieving this aim, the following specific objectives were set out to find out the effects of improper job design on worker's performance, examine some of the job design strategies that exists in most organization, investigate if employee's work is the work that has no definite job design, examine if the work of a employee is not recognized on given their due entitlement, find out if workers cannot satisfy their psychological social needs, identify the relationship between …
Can the material for “Extraction of Cashew Nut Oil and Its Effect on Caliform Bacteria” be used as a guide for Microbiology Project?
Yes it can be used — The study determines the Extraction of Cashew Nut Oil and Its Effect on Caliform Bacteria. In achieving this aim, the following specific objectives were laid out to extract oil from cashew nut and determine if the oil has any anti microbial effect in coliform organism like E. coil. Inhibitory effect of cashew (Anacardium occidentale) cotyledon oil was carried out using Escherichia Coli as test organism. The processed and loasted cashew nuts were bought and subjected to oil extraction using the soxhlet method. The extracted oil was absorbed on filter paper discs in varying concentrations and placed on seeded nutrient agar plates. The plates were incubated at 370C for 24 to 48 hours and observed for zones of inhibitation. The results …
Is the topic “Family Size, Self Efficacy and Students Performance in Biology and Chemistry” recommended for Biology / Chemistry Project?
Yes it is highly recommended — This study was carried out within the scope and ramification of the topic. It involves the collection, review and analysis of related literature and data. The topic of the study is “family size, self-efficacy and students’ performance in biology and chemistry”. Two schools (state high school Alimosho and Alimisho Grammer School) in Alimosho local Government Area of Lagos State were used as the population of the study. This work comprises of five chapters. Chapter one introduces the background of the study, the statement of problem, purpose, scope, limitation and the significance of study, together with the research questions and definition of key terms. Chapter two review some related literature. Chapter three dealt with the methodology on data collection, review and …
Can the material for “Attitudinal Difference in Hostel Behaviour on Social and Academic Orientation Among Undergraduate Female Students” be used as a guide for Education Project?
Yes it can be used — This study examined the attitudinal difference in hostel behaviour on social and academic orientation among undergraduate female students in University of Lagos, who were randomly selected from the five female hostels of the University of Lagos. Questionnaires were administered and results obtained and findings show that attitude towards hostel behaviour, religious value, socio-economic status and sex education influence the social and academic orientation of undergraduate female students. …
Can this topic “The Problems of Deforestation” be used for Agricultural Engineering (AE) Project?
Yes it can be utilized for research — This research was carried out in order to assess the causes and effects of deforestation in Ovia North East Local Government Area of Edo State. The researcher collected his information by distributing questionnaire to the people living in Ovia North East Local government Area in Edo State and to the Ministry of Agriculture Department of forestry in Ovia North East Local Government Area of Edo State. The information gathered were analyzed and presented in percentages. From the analysis, the researcher was able to identify the following. That it is only the government that can arrest the problem of deforestation. Deforestation can also lead to animal extinction That people resort to illegal felling of trees because employment opportunities are lacking elsewhere. Based …
Can the material for “The Effect of Recruitment, Selection Placement on Organizational Effectiveness” be used as a guide for Insurance Project?
Yes it can be used — The effect of recruitment, selection and placement of an employee in the right position in organization cannot be over emphasized. One of the test of an efficient personnel department is its ability to fill job position promptly and adequately. This means that the department must know the source of different type of applicants for the job position that it has to fill. Recruitment and selection alone are not the only vital elements commonly used in the process of employment. After recruitment and selection have taken place, the job holders may either be sent on training or not depending on the training needed and of course the feasibility of training before being placed under recruitment, the internal source which is one …
Can the material for “A Sociolinguistic Analysis of Proverbs in Adimora- Ezeigbo’s Trafficked” be used as a guide for English / Igbo Project?
Yes it can be used — Language is learned, shared, and it is an arbitrary system of vocal symbols through which human beings in the same speech community or sub-culture interact and hence communicate in terms of their common experience and expectations. Sociolinguistics is the study of any or all aspects of the society, including cultural norms, values, and beliefs. This research set out to carry out a sociolinguistic analysis of the proverbs in Adimora- Ezeigbo’s Trafficked. The sociolinguistic analysis of the selected proverb was carried out by using the Dell Hymes’ Ethnographic acronym model. The research found out that the settings, participants, ends, act sequence, key, instrumentality, norms, and genres allow for a comprehensive understanding of the data. It was also found out that in …