REPORT ON THE FABRICATION OF SIEVE SYSTEM
ABSTRACT
The construction of sieves system was carried out in the Engineering workshop, Institute of management and technology, Enugu.
The aim of this project is to fabricate a sieve system, which is capable of separating solid particles of various sizes.
The construction was carried out in order to analyze the sizes of particles.
The component parts of the sets of sieve and their dimension are as follow:
- Height of sieve —80mm
- Number of sieve —4
- Diameter of sieve —230mm
- Shape of sieve —cirular
- Height of sieve set —760mm
- Mesh/hole sizes — top —6.0mm, 2nd 5.0mm, 3rd 3.0mm bottom 1.0mm downwards respectively.
In constructing of this sieve system, some factors were taken into consideration and they are:
- The capacity of the sieve
- The type of mixture that can be filtered in it
- The types of properties and decomposition of the mixture.
- The type of material to be used for constructing the sieve.
The cost which is the determinant, factor in fabrication of any equipment.
These factors, help greatly in the fulfillment of the objective of this project study.
At the end of the fabrication, a sieve equipment was construct with specified dimension.
CHAPTER ONE
1.0 Introduction
Generally, all chemical engineering mostly deals with the construction of sieve among others construction in order to fulfill theory of separations technique. This construction is carried out so as to achieve and put to practice chemical process with the help of some component for equipment construction procedures.
Sieving equipments produces a nice separation of solid particles, although artificially, by allowing the social particles to pass through the pores or the a pasture, which consists of orderly, arrange set of sieves which is arranged in manner with their facilities sizes and shapes.
Sieving equipments operates satisfactory with reasonable coarse and fine particles, so that separation can be done they have high sensitive efficiency, but few have been built since the development of separation of particles, because of the lost and the procedures involved and the labour needed to clean the sieve plate and to handle the sieve equipment.
Moreover, in the construction of set of sieve, we have to bear certain qualities in mind to portray such as determination of size and shape of the equipment which contributes to the efficiency of the equipment.
However, the operation has evolved as a particle at rather than a theoretical science, nevertheless, its theory has received steady attention since the pioneering work of some important scientist half a century ago.
They are usually used in large industries like mining, coal, gold, diamond and pharmaceutical etc, because of its importance and efficiency and would not be seen commonly.
Above all, the purpose of this project is to fabricate a set of sieve which sole aim is for separation of solid particles of different size by passing through the mesh with the help of shaking and larger particles retained on the mesh (oversized) and the particles that passes through (undersized) enables us to separate the particles.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Report on the Fabrication of Sieve System can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Report on the Fabrication of Sieve System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Functions and Achievements of Government Support Agencies in the Development of Entrepreneurship in Enugu State” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — Government have set up agencies that are specifically charged with training the people, providing funds and other services for the promotion and development of entrepreneurship. This project work focused on the functions and achievement of government support agencies in the development of entrepreneurship in Enugu State with special reference to the national directorate of employment (NDE). It is the aim of this research to find out the following, the functions of the government support agencies especially NDE whether the various programmes of the NDE has helped to achieve her mandates, whether the growth in the number of small business or entrepreneurial organization can be attributed to the established of the government support agency if there is anything that makes the achievement of …
Can this topic “Analytical Study of Merger and Acquisitions in the Insurance Industry in Nigeria” be used for Insurance Project?
Yes it can be utilized for research — This project is divided into different stages for ease of references of simplification of analysis which goes as follows: The introduction of mergers and acquisition, the background of the study which state the different problems that brought about mergers and acquisition which are the inability to settle claims, bad eggs in the industry, inability to bring up better services and innovative ideas that can enable the industry grow. Insurance has not been able to get to the rural area, it makes insurance non-popular profession that one must study, but since it has failed in this area, the common man find it difficult to know what insurance is all about. In order for the industry to stop the liquidation in the industry, the …
Is the topic “An Examination of Problems and Prospects of Real Property Taxation in Nigeria” recommended for Environmental Science Project?
Yes it is highly recommended — Increasing demand for urban infrastructures on land and dwindling revenue allocations in Nigeria have informed the Rivers State Government to promulgate Land Use Charge Law (2001) as a way of increasing internally-generated revenues through property tax. The Law stipulates a formula for assessing the Charge payable on properties in Lagos State, amongst other provisions. The aim of this research is to identify the problems and prospects of real property taxation in Nigeria. This study found that high tax and penalties may discourage investment in new housing and maintenance of existing real properties in Nigeria. It therefore recommended a review of the Land Law and in addition suggested an appropriate basis of fair and equitable tax. …
Can the material for “Conflict Management Skills of Nurse Tutors in Basic Schools of Nursing in Imo State” be used as a guide for Nursing (Science) Project?
Yes it can be used — This study assessed the conflict management skills of Nurse Tutors in Enugu State Basic School of Nursing. Conflict abounds in Basic Schools of Nursing which has a lot of consequences like strained relationships, collapse agreement, poor academic performances and so on. It becomes necessary to assess especially in these institutions where conflicts abounds whether nurse tutors posses the necessary skills to resolve the conflict as the findings may necessitate a training for them. The purpose of this study is to assess the conflict management skills of nurse tutors in Enugu State Basic Schools of Nursing. A descriptive survey method was used for the study which was carried out in three (3) Basic schools of Nursing in Enugu State. All (50) …
Can the material for “Fraud in Nigerian Banking System” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — This project with a paramount objective to finding dependable solution to the problems of fraud in Nigeria is justified by the need for true banking system in Nigeria, restoring the customers confidence in the bank just to mention but a few. The choice of African International bank ltd (ATB) as the case study wasn’t taken fortuitously but an obvious one due to its oldest, highest and growth, capacity and so ideas and experience pertaining to the topic. Data for this research were collected many through the use of interview. Data collected were analyzed using the simple percentage method of analysis, more so, the chapter one of this work introduces the topic as well as the background, chapter two review the related …
Can this topic “An Appraisal of Inmates’ Rehabilitation Facilities in Delta and Warri Prisons” be used for Estate Management (EM) Project?
Yes it can be utilized for research — This central thrust of this research is to appraise the inmates’ rehabilitation facilities in Nigerian Prisons using Kaduna and Zaria prison as a case study. Against this backdrop, this study attempts to empirically appraise the inmates’ rehabilitation facilities in Nigeria prison with Kaduna and Zaria Prisons as the case study. To achieve this, sample size of 145 inmates, 37 staff was selected through simple random sampling by the use of prison register. Qualitative and Quantitative data were collected through the use of questionnaire and interview method. Also the analysis of data was through the combination of qualitative and quantitative analysis. This result of the data analysis showed that the respondents varied in socio-demographic characteristic such as age, sex, marital status, educational …
Is the topic “Design and Simulation of Vehicle Speed Control System” recommended for Computer Science (CS) Project?
Yes it is highly recommended — This proposed work is an attempt to control the speed of the vehicle designed with computer software to enable the third party or owner to get the location, speed and activity of the driver. To achieve this, the system can transmit the information in real time. The use of GSM/GPRS technologies allows the system to track the objects and provide the up-to-date information. This information is authorized to specific users over the internet as the server gets the information. It is the tele-mointoring system to transmit data to the remote user. Thus the applications are used in real time traffic surveillance. This study proposes a prototype model for location tracking using Geographical Positioning System (GPS) and Global System for Mobile …
Can the material for “Strategies for Minimization of Financial Audit Problems in Public Sector” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — The purpose of this research work is to identify strategies for the minimization of financial audit problems in the public sector. The researcher addressed the under listed problems in the process of the research. The public sector is plagued with inefficiency which is needed to be improved. She wanted to find out; how often auditors give audit reports in public sector. If public sector auditor can be skilled to cope with the present computerization of government account, If the internal auditors in the public sector are very effective. The researcher embarks on this study for the purpose of expressing lapses present in the audit of government account in PHCN and also addresses such problems that may arise from the statement …
Can the material for “Design and Implementation of an Online Examination Hall Allocation System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Presently in today’s institution, there is a geometric rise in the number of students admitted with a ration in the number for each department and level of study This variation in the number of students has posed a problem in allocating halls into consideration for student Based on this, there is a so much need for a system that would alleviate such problem. The project work“Design and implementation of a web based hall allocation system for examination” tends to allocate halls for examination by taking into consideration the availability of space to match the number of students in each department for each level. Structured System Analysis and Design Methodology (SSADM) were adopted in the analysis. A web based hall allocation system …
Can the material for “Adoption of Library 3.0 Technologies for Library and Information Service among Undergraduate Student” be used as a guide for Library and Information Science (LIS) Project?
Yes it can be used — Library 3.0 technologies is a model for a modernized form of library services that reflects a transition within the library world in the way services are delivered to users. The aim of the study is to examine the Adoption of Library 3.0 Technologies for Library and Information Service using Benson Idahosa University Undergraduate Student as a case study. In achieving this aim, the following specific objectives were set out as follows to: examine the adoption impact of Library 3.0 Technologies for Library and Information Service among Undergraduate Student in Benson Idahosa University, ascertain the level of awareness of Benson Idahosa University Undergraduate Student towards Library 3.0 Technologies, and determine the challenges associated with the application of Library 3.0 Technologies in …