MODIFICATION OF SURFACE, PHYSICAL AND CHEMICAL PROPERTIES OF ACTIVATED CARBONS FOR WATER PURIFICATION
CHAPTER ONE
1.0 Introduction
1.1 Origin And Nature Of Activated Carbon
Carbon is the fifteenth most abundant element in the earth’s crust and the fourth most abundant element in the universe by mass after hydrogen, helium and oxygen. Scientists, industries, and consumers use different forms of carbon and carbon containing compounds in many ways such as activated carbon or carbon in its active form which can be used to purify water, among others.
Activated carbon is a form of carbon that has been produced to make it extremely porous and thus have a very large surface area available for adsorption or chemical reactions.
It can be defined as a microcrystalline non-graphitic amorphous form of carbon which has been processed to develop a high internal porosity due to its network of inter-connecting pores.
The history of activated carbon is dated since the fifteenth century, during the time of Columbus when sailors used to blacken the inside of wooden water barrels with fire, since they observed that the water would stay fresh much longer. It is likely that people at that time proceeded by intuition only without having any insight into the mechanism of the effect. The mechanism was recognized beginning from the eighteenth century.
In 1862, Lipscombe prepared a carbon material for purifying portable water. This development paved the way for the commercial application of activated carbon first for portable water and then in waste water sector.
1.2 Methods Of Manufacture Of Activated Carbon
The methods employed in the industrial manufacture of activated carbons are numerous but consist of three main methods namely; Chemical activation, Steam activation and thermal processing techniques.
The raw materials or precursors used in the manufacture of activated carbon are as follows; Softwood, coconut shell, lignite, hardwood, grain and agro products, bituminous coal, anthracite, etc.
Chemical activation is generally used for the production of activated carbon from sawdust, wood or peat and uses chemicals for activation. Chemical activation technique involves mixing an inorganic chemical compound with the carbonaceous raw materials and the most widely used activating agents are Phosphoric acid and Zinc Chloride.
Steam activation technique is generally used for coal-based, coconut shell and grain-based activated carbons and uses gases, vapors or a mixture of both for its activation.
Thermal processing technique is a separation process that removes unwanted materials from the carbonaceous precursor used under varying heat applications. This technique is at a lower cost compared to the two techniques above and meets all environmental standards, while others need expensive solutions to achieve the same results.
1.3 Need For Present Investigation
The need for present investigation of this material cannot be over emphasized. This is as a result of the pressing need for treatment of waste water emanating from domestic and industrial concerns.
Activated carbon plays an important role in the purification of fluids (water), including vegetable oils used in domestic cooking and as a precursor in industrial manufacture of food products. The slow pace of technological development in the country has resulted to the expenditure of the nation’s resources on importation of activated carbons to meet the demand for local chemical and process industries, as well as the demand for municipal and industrial water treatment plants.
Rapid industrialization, together with the increase in modern methods of agriculture and the increase in population, has contributed to the pollution of the ecosystem. Most of the pollutants are toxic to living organisms. It is therefore imperative that waste water has to be treated to remove the toxic materials before disposal to the environment. Most methods of treating water have some inherent shortfalls. Activated carbon treatment was therefore developed because of its effectiveness in pollutants removal, especially in water purification.
1.4 Aim and Objectives of the Study
The aim of the study is to examine the Modification Process of Surface, Physical and Chemical Properties of Activated Carbons for Water Purification. In achieving this aim, the following specific objectives were laid out as follows:
- To examine the different types of activated carbons available to the nation’s chemical industry.
- To modify the surface physical and chemical properties of the carbon material, for their use in liquid phase applications.
- To determine the physical properties of the as-received and modified activated carbon materials.
- To test the adsorption capacity of the carbon materials in adsorption processes.
- To evaluate the fractional surface coverage for each carbon material.
- To propose a scheme for the optimal modification of activated carbon material for optimal application in liquid phase adsorption.
1.5 Scope of Study
The scope of the research is focused on the Modification of Surface, Physical and Chemical Properties of Activated Carbons for Water Purification.
1.6 Limitations of the Study
During the course of this study, there were some problems encountered which stood as limitations to the research work. Some of the limitations include:
- Time Constraint:
The time frame given to accomplish this project was very short due to school academic calendar and it was carried out under pressure which made the researcher not to implement some necessary features.
- Financial Constraint:
Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information and in the process of data collection (internet).
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Modification of Surface, Physical and Chemical Properties of Activated Carbons for Water Purification can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Modification of Surface, Physical and Chemical Properties of Activated Carbons for Water Purification" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Design and Implementation of Computer Security: Data Encryption, Decryption and Key Hash Algorithms” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Encryption attempts to ensure secrecy in communications, such as those of spies, military leaders, and diplomats, but it have also had religious applications. The problem is security. The password method used in almost all commercial operating systems is probably not very strong against a sophisticated or unsophisticated attacker. The aim of the study is to eradicate the problems of the existing system. In achieving this aim, the following specific objectives of study were considered in other to; understand and improve the computer data security through encryption of data, provide a means of safeguarding data in a system, enhance the integrity of data, facilitate the use of more sophisticated tool against hacking, cracking, bugging of a system, and develop a platform …
Is the topic “The Impact of Strategic Human Resources Management in the Banking Industry” recommended for Banking and Finance (BF) Project?
Yes it is highly recommended — Human Resource Management is the strategic, integrated and coherent approach to the employment, development and well-being of the people working in organizations. The study was carried out to examine the impact of strategic human resources management in the banking industry. In achieving this aim, the following specific objectives were laid out to determine how Recruitment and selection practices affect employee effectiveness, assess the effect of performance appraisal on employee performance and evaluate the influence of compensation plan on Employee Motivation in First Bank Nigeria Plc. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 133 (one hundred and thirty three) respondents were selected for …
Can the material for “Effect of Social Media on Academic Performance of Students” be used as a guide for Mass Communication (MC) Project?
Yes it can be used — The study was carried out to investigate the Effect of Social Media on Academic Performance of Students in Usmanu Danfodiyo University Sokoto. Investigation revealed that the educational system in Nigeria is faced with so many challenges which have certainly brought about a rapidly decline in the quality of education. There is a deviation, distraction and divided attention between social networking activities and their academic work. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. Primary data were collected from the primary source which questionnaire was used as an instrument of data collection while secondary data were sources from textbooks, journals, newspapers and the internet were employed. The …
Can the material for “The Effects of Processing Methods on the Physico-Chemical Properties of Sorghum and Sweet Potato” be used as a guide for Biochemistry Project?
Yes it can be used — This study evaluated “the effects of processing methods on the physicochemical properties of sweet potato and sorghum flour”. Sweet potato (Ipomoea batatas) is an important food crop in the tropical and sub-tropical countries and belongs to the family convolvulaceae. Sweet potatoes are rich in dietary fiber, minerals, vitamins, and antioxidants such as phenolic acids, anthocyanins, tocopherol and β-carotene. The proximate composition of sweet potato was determined and these include moisture, lipids, ash, protein, carbohydrates and fiber. In carrying out the analysis practically, methods used vary according to the food material. The antioxidants were also determined alongside with phenol oxidase, pasting properties, minerals and sweet potato contents. Sorghum is a tropical plant belonging to the family of poaceae. More than 35% …
Can the material for “Effect of E-waste on Environment and Health” be used as a guide for Environmental Science Project?
Yes it can be used — The study scrutinizes the Effect of E-waste on Environment and Human Health in Oka Community. In achieving this aim, the following specific objectives were laid out as follows to: ascertain the current state of waste disposal, examine the effect of waste disposal on environment and human health, identify factors that affects waste disposal and the type of solid waste disposal system that will aid economic development of the state, determine whether improper disposal has any significant impact on economic sustainability and assess how improved sustainable waste disposal practices can contribute to economic development process in Oka Community. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A …
Can the material for “Deposit Money Banks and the Growth of Small Scale Enterprises” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — This research work assessed deposit money banks and the growth of small scale enterprise. The objectives of this study is to examine the efficiency of SMEs in accessing adequate credit from DMBs in Nigeria, to determine the potential of DMBs’ credit in fostering SME growth; identify the challenges faced by SMEs in accessing finance from DMBs in Nigeria. Data were collected through questionnaire distributed to respondents. Simple percentages were used in presenting data while the chi-squared (X2) statistical technique was used to test the hypothesis. The result revealed that all the sampled investors in Small and Medium Scale Enterprises sourced their funds from personal savings, money lenders, thrift associations, friends and family members while a few sourced part of their …
Can the material for “Challenges Preventing Public Secondary School Students from using ICT for Learning and the Way forward” be used as a guide for Education Project?
Yes it can be used — The study investigates the Challenges Preventing Public Secondary School Students from using ICT for Learning in Anambra State and the Way forward. In achieving this aim, the following specific objectives were laid out to identify school teachers’ perceptions in implementing ICT tools in teaching and learning in classroom, examine the problems preventing public secondary school students from Learning using ICT tools in Anambra State, determine the challenges of using ICT tools in teaching and learning in the classroom among school teachers, identify that to what extent do teachers use ICT tools in teaching and learning in the classroom, ascertain the availability of interactive ICT in teaching and learning of Public Secondary School Students in Anambra State, and suggest the way …
Is the topic “Computerized Quality Control System for Company” recommended for Computer Science (CS) Project?
Yes it is highly recommended — A quality control system in production management is a qualitative technique with strong financial implications having direct relationships with production, marketing, purchasing and financial politics. The aim of the study is to develop and implement an integrated computerized quality control system in production of an automobile firm using ANAMMCO LTD Enugu Nigeria as a case study. In achieving this aim, the following specific objectives were laid out as follows to design and develop an application software that will permit on-line-time data storage and information retrieval, save the production time per section and as such ensure customer satisfaction and reduce stock redundancy or inherent in the manual system of quality control system in production. The motivation that led to the implementation …
Can the material for “The Importance of Introducing Information Technology in the Teaching of Geography” be used as a guide for Geography Education Project?
Yes it can be used — Geography is a subject that studies the interrelationships between the physical environment and humans in the place. The study was carried out to investigate the Importance of Introducing Information Technology in the Teaching of Geography using Dekina Local Government Area, Kogi State as a case study. In achieving this aim, the following specific objectives were laid out to identify teachers’ and students’ perception of the use of ICT in teaching Geography in Secondary Schools and evaluate the difference between the use of traditional method of teaching Geography and the use of ICT in teaching Geography. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of …
Can this topic “Computer Cloud Security System” be used for Computer Science Education Project?
Yes it can be utilized for research — Cloud Computing is regarded as distribution architecture and its main objective is to provide secure, quick, convenient data storage and net computing service, with all computing resources visualized as services and delivered over the Internet. The aim of the study is to design and implement a Computer Cloud Security System. In achieving this aim, the following specific objectives of study were laid out as follows to develop an application software that will enable any user before sending data to the cloud be encrypted with security key, device a means of sharing data in a more secure and reliable manner over the cloud system and create the awareness of the security threats in cloud computer to the people so as the …