
FEASIBILITY STUDIES AS A TOOL FOR SUCCESSFUL COOPERATIVE BUSINESS ENTERPRISES
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Feasibility Studies as a Tool for Successful Cooperative Business Enterprises (A Case Study of the Importance of Feasibility Students to Cooperative Investment) can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
![]() | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Feasibility Studies as a Tool for Successful Cooperative Business Enterprises" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Feasibility Studies as a Tool for Successful Cooperative Business Enterprises" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “The Contribution of Production Skills in the Management of Business Organization to Gain Competitive Advantage” be used as a guide for Business Management Project?
Yes it can be used — Production skills is a basic element in maintaining the production capacity of an organization is an important function in any production organization. The aim of the study is to determine the Application of Production Skills in the Management of Business Organisation to Gain Competitive Advantage. In achieving this aim, the following specific objectives were laid out to evaluate the impact of production skills to gain competitive advantage, determine management strategies to sustain competitive advantage, and find out innovative strategies for developing new products. Production skills entails Industries and business organization be it private or public, have one thing in common, the human workforce, this could confidently be said, that organization, will not exist without its human resources, since a business …
Is the topic “The Problem of Teaching and Learning of Agricultural Science in Tertiary Institutions” recommended for Agricultural Economics and Extension Project?
Yes it is highly recommended — The study scrutinized the Problem of Teaching and Learning of Agricultural Science in Tertiary Institutions using Sabon Gari Local Government as a case study. In achieving this aim, the following specific objectives were laid out to determine the effect of agricultural practices in the society on the study of Agriculture Science and assess the factors affecting the teaching and learning of agriculture in Senior High Schools in Sabon Gari Local Government. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 150 (one hundred and fifty) respondents were selected for this study to represent the entire population of the study. For null hypotheses were formulated …
Is the topic “Design and Implementation of Electronic Diagnosis System” recommended for Computer Science (CS) Project?
Yes it is highly recommended — Diagnosis system deals with the registration of patient information, doctor’s information and report, collection of diseases and infected syndrome, and diagnosis of these diseases. The aim of the study is to Design and Implement an Electronic Diagnosis System for diagnosing non-communicable diseases. In achieving this aim, the following specific objectives were laid out to design and develop a diagnostic software that will ascertain whether the diseases could be diagnosed based on signs and symptoms, aid clinicians in diagnostic procedures and offer prescription of medication, and enable flexibility in access to information through the World Wide Web or comprehensive knowledge bases. The motivation that led to the development of the proposed system is that; file and record about patients are not …
Is the topic “Examination Verification System Using Biometric (Fingerprint)” recommended for Computer Science (CS) Project?
Yes it is highly recommended — An examination board is an organization that sets examinations and is responsible for marking them and distributing results. Examination boards have the power to award qualifications, such as SAT scores, to students. Most exam boards are running as non-profit organizations. The aim of the study is to design and implement an Examination Verification System using WAEC Biometric as a case study. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will capable of tracking impersonators in the examination system using the methodology of finger print biometrics and reduce rate of corruption in the educational sector and increase the rate of self confidence on students. The motivation that led to the …
Can this topic “Design and Implementation of an Enhanced Online Result Processing System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — The end-of-course grades assigned by lecturers are intended to convey the level of achievement of each student in the class. These grades are used to make a multitude of decisions. Unless a sufficiently accurate and efficient method is used for the grading, the grades are apt to convey misinformation and lead the decision-maker astray. In itself, the processing of results is found to be rather tedious, especially when carried out manually, and when the number of students is large. It is time-consuming and error prone. The process, however, becomes a lot easier and much more accurate when carried out with a computer running a suitable software application. To find a sufficiently fast and accurate method of carrying out this processing …
Is the topic “The Impact of Privatization on the Nigerian Economy” recommended for Economics Project?
Yes it is highly recommended — This paper examines the outcome of privatization in the Nigerian economy within the context of a globalized economic system and against the supposed inefficiencies of state owned enterprises. It argues that the privatization process in Nigeria as in other developing countries represents among other characteristics a new phase in the export of capital from the advanced countries. Having examined some key economic variables, the paper further argues that the privatization process has not resulted in any significant improvement in the Nigerian economy. Data gathered for this study was from secondary sources and were treated and analyzed by the use of descriptive statistics, with quantities appearing in tables and percentages.(Reduce the abstract to 100 words or less) …
Can the material for “Design and Construction of Microcontroller Timer Socket Outlet” be used as a guide for Electrical / Electronics Engineering (EE) Project?
Yes it can be used — Electrical appliances and electronics equipment such as electric heaters, electric cooker, computers, television receivers, mobile phone chargers, power banks e.t.c are always connected to a socket outlet at our homes and offices. The study was conducted to Design and Construct an automatic socket outlet with an operational timer incorporated into it using a microcontroller. In achieving this aim, the following specific objectives were laid out to conserve electrical power domestically, reduce and subsequently prevent electrical hazards in the home front and control the use of electrical power domestically. The 1 to 100 minute socket outlet timer is introduced to prevent and reduce the above problem by allowing the user to always select appropriate time before connecting equipment or an electrical …
Can the material for “Trade and Business Openness and Output Growth in Nigeria” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — This research work studies the international competitiveness of the Nigerian economy in the global market by analyzing the relationship between trade openness and output growth in Nigeria. Using time-series data over the period 1970-2007, we show that output growth of the Nigeria economy is a function of two sets of shocks; (i) external shocks (openness and real exchange rate) and (ii) internal shocks (real interest rate and unemployment rate). A non-monotonic and an ANCOVA econometric models are postulated in order to capture the structural pattern of the relationship between openness and output growth as well as the policy effect of structural Adjustment program (SAP). The result shows that there is an inverted U-shape (no-monotonic) relationship between openness and output growth …
Can the material for “Effect of Rapid Population Growth on the Economy” be used as a guide for Economics Project?
Yes it can be used — The study was carried out to survey the effects of population in Ondo State a case study of Okitipupa Central. The sample consists of 26 area in Okitipupa Central. A questionnaire was constructed based on the crave for the percentage of increase yearly. The effect of grow on Nigeria economy in particular, Okitipupa central the percentage of parents that have more than four children, if a family planning centre can be built to reduce the population growth, the enlightenment, government intervention to the increase growth as well as the peoples move or reaction to the increasing population. The major findings include; the population of Okitipupa Local Government Area. The percentage of parent having four children is low family planning centre can …
Can this topic “Privatization and Nigeria Economy” be used for Accountancy / Accounting Project?
Yes it can be utilized for research — Privatization of State-owned enterprises has emerged globally as a public policy aimed at reversing the appalling trend of public and social services provisioning. This study therefore examines the justifications for privatization side by side the actual experiences sequel to the policy implementation in the electricity industry in Nigeria. The research was conducted using survey method. In-depth interviews were conducted with identified respondents in addition to data gathered from the questionnaire. Quantitative analyses of the data were done and the findings include the existence of a wide gap between theory and the experience. It was found out a woeful failure of the policy at the three levels of the unbundled electricity industry and especially with the PHCN that is our case …