FACTORS MILITATING AGAINST THE TEACHING OF MECHANICAL ENGINEERING CREATE PRACTICE IN GOVERNMENT TECHNICAL COLLEGES
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Factors Militating Against the Teaching of Mechanical Engineering Create Practice in Government Technical Colleges can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Factors Militating Against the Teaching of Mechanical Engineering Create Practice in Government Technical Colleges" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Factors Militating Against the Teaching of Mechanical Engineering Create Practice in Government Technical Colleges" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Metabolizable Energy Values of Dried Leaves of Cassava (Manihot Esculenta), Siam Weed (Vernoma Amygdalina), and Bitter Leaf (Chromolaena Odorata) for Broiler Chickens” be used as a guide for Animal Science Project?
Yes it can be used — A study was conducted to determine the apparent metabolizable energy (AME) value of dried leaves of cassava (Manihot esculenta), siam weed (Vernoma amygdalina)and bitter leaf (Chromolaena odorata). In determining the ME values, the substitution method was adopted and the basal diet which was a standard broiler finisher diet containing about 3000Kcal/kg ME and about 20.0% crude protein (CP) constituted the diet 1. In diet 2,3,4, Siam weed leaf meal (SLM), Bitter leaf meal (BLM) and cassava leaf meal (CLM) replaced 20% of the basal diet (that is 80% basal + 20% leaf meal). Birds (6 weeks old) were placed in metabolic cages for collection of excreta. Excreta was collected from each replicate for three consecutive days, weighed, dried and analyzed. …
Can the material for “Establishment and Management of a Small Scale Poultry Business” be used as a guide for Business Management Project?
Yes it can be used — The central aim of any business organization is to make profit and also to own a business of their own. The purpose of this project is to teach goat husbandry to establish and manage a poultry business for easy and local production. Operator of small scale goat farm is expected to follow keenly the operational methods of marketing strategies and promotional programme for marketing of goat. Finally, a small scale goat farm is established not only to rear goat but also to maximize profit from farm production. …
Is the topic “Senior Secondary School Student’s Misconceptions in Physics” recommended for Education Project?
Yes it is highly recommended — This study investigated the senior secondary school student’s misconceptions in Physics in various Local Government Area of Lagos state. The major misconceptions were outlined and the hypotheses were tested at 0.05 level of significance using gender, age and cultural as moderator variable. Three hundred (300) SSS III Physics students were randomly selected from Eight (8) Senior Secondary Schools purposively selected from four (4) various Local Government Area of Lagos which constituted the sample of the study. Fifty (50) items test questions on misconception of students in Physics which was the instruments used in collecting data. The instruments were subjected to face, content and empirical validations. The data collected were analyzed using Pearson moment correlation, T-test. The results of the study showed …
Can the material for “Design and Implementation of a Computer Based Maternity Information Management System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Computer Based Maternity Information Management System has been shown to be an effective strategy for improving maternal stress and self-efficacy during pregnancy, with the implementation of the Maternity system, it will provide opportunities for pregnant women to develop competence and obtain knowledge, skills, and social support from health care providers. The aim of the study is to Design and Implement a Computer Based Maternity Information Management System. In achieving this aim, the following specific objectives were laid out to develop an application software that will provide information availability to maternity patients and the best way for information processing retrieval and secured storage for future purpose. The motivation that led to the implementation of the proposed system is that care provider …
Can the material for “The Impact of External Aids to Political and Economic Development of Nigeria (From 1999 – 2005)” be used as a guide for Public Administration (PA) Project?
Yes it can be used — This research work focuses on the impact of external aids to political and economic development of Nigeria (from 1999 − 2005). The objective of this study is to find out if these external aids have really brought development in Nigeria and if not, to find out why they have not and to discovered whether they are possible means through which these aids can be stipulated to bring the expected development. It was discovered that aid helps in technical growth and health improvement especially reduction in child mortality and fighting HIV/AIDS in Nigeria. On the other hand, the discovery shows that financial aid result to debt burden, influences Nigeria foreign policy direction and are always given with considerations. Also the recipient does …
Is the topic “Assessment of Services of the Physically Challenged” recommended for Sociology Project?
Yes it is highly recommended — The necessity to improve the plight of the physically challenged in Enugu State gave rise to the assessment of the services of the centre for the rehabilitation of the physically challenged persons in Enugu State. It is worthy to note that this thesis is specifically tailored to appraise the performance of the centre and ascertain the extent to which these services have promoted the overall welfare and wellbeing of the inmates of the centre. Moreso, this study strives to unravel various besetting the general operations of the centre. This study made specific recommendations that could improve the services of the centre vis-à-vis the development of the inmates. Essentially, this research work is divided into five chapters, so as to articulate …
Can the material for “Assessment of Micronutrients in Children with Malaria Infection” be used as a guide for Microbiology Project?
Yes it can be used — The increased clinical state of malaria infection may be due to poor nutritional status most especially as a result of micronutrients deficiency. Micronutrients play vital role both in combating anaemia and other adverse effects of malaria infection in humans and animals in developing resistance against the disease. This research was aimed at establishing the effect of malaria parasite on neutrophil-lymphocyte ratio, platelet-lymphocyte ratio and some essential plasma electrolytes (calcium, magnesium and iron) as well as vitamins (vitamin B12 and folate) of children. Ethical approval was gotten from ministry of Health, Benin City, Edo State. Test group was recruited from the paediatric ward of Central Hospital, Benin City. A questionnaire, written in English was administered to the parents of the subjects to …
Can the material for “Mergers and Acquisitions in the Nigerian Banking Industry” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — The study was designed to examine mergers and acquisitions in Nigrerian banking industry. The need to carry out this study rose from the challenges faced by Nigerian banks despite the reduction of banks from the end of 31st December 25. These changes faced by banks in the country have made researchers to questioin the effeiciency of the consolidation of banks in Nigeria. The explorative research method was used for this study. Data was collected from jornals, textbooks, conference papers and the internet. The frindings reveals that the consolidation (mergers and acquisitions) activities in Nigerian did nto meet the desired objective of liquidity, capital adequate and corperate government, which resulted tomore troubled after the consolidation. On the basic of this, the study …
Can the material for “Medical Expert System for Diagnosis and Prescription” be used as a guide for Computer Science (CS) Project?
Yes it can be used — This project work focuses on computerization of medical diagnosis and prescription system to increase medical services and enhancement of logistic efficiency. The aim is to produce approach which through computer programs and files carefully created, written, designed and integrated from an application package that accepts both physical states of patients. Disease symptoms (input data) and as such one which is able to store, access, manipulates as much information as possible. The ease and speed of processing, storage and versatility of the computer make it possible for easy diagnosis and prescription interestingly; the end results is the ability analysis of the disease by producing the input data and provide summaries of the total treatment bill, lab result and other disease investigation and confirmation …
Can the material for “Design and Construction of a Laboratory Centrifuge” be used as a guide for Electrical / Electronics Engineering (EE) Project?
Yes it can be used — A Laboratory Centrifuge is a piece of equipment generally driven by an electric motor and some older ones usually spun with hand, that puts an object in a rotation around a fixed axis, applying a force perpendicular to the axis. The study was conducted to design and construct a Laboratory Centrifuge using local materials. It spun liquid samples at a high speeds and thus creates a strong centripetal force causing the denser materials to travel towards the bottom of the centrifuge tube more rapidly that they would under the force of normal gravity. The present high cost of imported centrifuges necessitates the design and construction of A Laboratory Centrifuge using local raw materials. The use of steel for the construction …