EFFECTS OF PARTIAL COMPLETION ON PRODUCTIVITY INDEX
ABSTRACT
A new method for analysing productivity index (PI) on vertical wells is the main objective of this study. Well performance is often measured in terms of the well's productivity which is dependent on a number of factors such as the reservoir's configuration, the type of completion, petrophysical and fluid properties, formation damage, etc. The effect of partial completion is the main focus of making the productivity index analysis since almost all vertical wells are partially completed due to the reasons of water coning or gas cap issue, etc. It is also very expensive to fully complete a well especially when the formation thickness is so large.
Pressure behaviour solutions for both closed boundary and constant pressure boundary have been obtained, taking into consideration the effect of partial completion.
Productivity of a well is usually evaluated on the long time performance behaviour, thus the pseudo-steady state (late time) approach has been employed for calculation of the productivity index.
Several key factors have been tested on productivity index such as pseudo skin, shape factors, penetration ratio, reservoir drainage area and etc. The effects of these factors have been analysed on PI. Theoretical data were used in carrying out the analysis with results indicating that, productivity index increases with increasing completion interval and vice versa, whiles pressure drop due to skin as a result of restricted entry to fluid flow increases tremendously with decreasing completion interval.
Shape factors of various well positions in bounded reservoirs were computed and compared with results obtained by Dietz, and Babu and Odeh.
CHAPTER ONE
1.0 Introduction
1.1 Problem Statement
Well productivity is one of the major concerns in oil field development, and provides the means for oil field development strategy. Sometimes, well performance is measured in terms of productivity index. In order to arrive at the economic feasibility of drilling a well, petroleum engineers require proven and reliable methods to estimate the expected productivity of that well. Well productivity is often evaluated using the productivity index, defined as the production rate per unit pressure drawdown. Petroleum engineers often relate the well productivity evaluation to the long-time performance behaviour of a well, that is, the behaviour during pseudo-steady-state or/and steady-state flow of a closed system or/and constant pressure system respectively.
The long-term productivity of oil wells is influenced by many factors. Among these factors are petrophysical properties, fluid properties, degree of formation damage and/or stimulation, well geometry, well completions, number of fluid phases, and flow-velocity type (Darcy, non-Darcy) (Yildiz, 2003).
Depending upon the type of wellbore completion configuration, it is possible to have radial, spherical or hemispherical flow near the wellbore. A well with a limited perforated interval (partial completion) could result in spherical flow in the vicinity of the perforations as depicted in fig. 2.1. A well which only partially penetrates the pay zone, could result in hemispherical flow. These conditions could arise where coning of bottom water or gas cap becomes a serious issue (Ahmed, 2005). Figures 3.1 and 3.2 respectively depict the true picture of radial and spherical flow behaviour in a partially completed vertical well.
Partial completion is the completion of or flow from less than the entire producing interval. This situation causes a near-well flow constriction that result in a positive skin effect in a well-test analysis. The net result of partial completion yields extra pressure drop in the near wellbore region and reduces the well productivity.
The present analytical method of evaluating productivity index in vertical wells with partial completion does not account for the effect of pressure drop due to partial completion.
The purpose of this study is to develop analytical model for evaluating productivity index (P.I) of vertical wells with partial completion, where the effect of pressure drop due to partial completion is taken into account and compare results with conventional methods.
The partial differential equations were solved for both no-flow boundary and constant pressure boundary systems in Laplace and Fourier Transform domains before inversion to real time domain.
1.3 Objectives of Study
The main objectives of this work are to:
- Develop analytical model for pressure behaviour in closed and constant pressure boundary systems
- Develop an analytical model for evaluating productivity index of vertical wells with partial completion for both closed-boundary and constant pressure boundary systems taking into account the effect of pressure drop due to partial completion
- Calculate shape factors and compare with the existing ones and
- Investigate the factors and parameters that influence or control productivity index.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Effects of Partial Completion on Productivity Index can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Effects of Partial Completion on Productivity Index" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can this topic “Comparative Toxicity of Crude Oil and Kerosene on the Growth of Nitrifying Bacteria Isolated From Soil” be used for Microbiology Project?
Yes it can be utilized for research — Crude oil and kerosene have useful applications in the society and are, therefore, used as sources of income and energy. However, the spills arising from crude oil and kerosene in our environment are becoming a visible problem in our ecosystem. Crude oil and kerosene pollute our farmlands and other arable lands and may negatively affect the growth and activities of nitrifying bacteria responsible for nitrification process, leading to loss of soil fertility. Considering the important roles played by nitrifying bacteria in soil fertility in our ecosystem, the assessment of the response of the nitrifying bacteria to pollution stress exerted by crude oil and kerosene on them was investigated. Two genera of nitrifying bacteria were isolated from the soil and were …
Can the material for “Effects of Peer Group Pressure on Social Studies Student Academic Performance Among Junior Secondary Schools” be used as a guide for Social Studies Project?
Yes it can be used — The peer group refers to the student own friends, and equal member of the group often have common characteristics. The study was carried out to investigate the Effect of Peer Group on students’ academic performance. In achieving this aim, the following specific objectives were laid out to determine the relationship between peer group and academic performance of students and find out the effect of peer group among Social Studies students’ academic performance in the area under study. Investigation revealed that the low academic performance in schools is brought the need to investigate the factors influencing learning. The peer group pressure is one of the factors causing low academic performance. The research design used in this report is descriptive design, utilizing …
Can the material for “Design and Implementation of a Post Natal Appointment Scheduling System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Post Natal is defined as the six weeks after childbirth arrangement to meet an health care worker such as; Doctors and Nurses, at a particular time in an hospital. The aim of the study is to design an application that will eradicate the existing problems of the post natal appointment scheduling system. In achieving this aim, the specific objectives below will be adhered to; develop an application that will enable the care providers search and browse post natal patient record without delay, store post natal patient file record in a database that will enable care providers to be able to locate patient files in the health facility, develop an application that will accurately schedule multiple patient daily appointment meet-up with …
Can the material for “The Impact of Macroeconomic Policy on the Growth and Development of Small Scale Industry in Nigeria” be used as a guide for Economics Project?
Yes it can be used — The research study is directed towards the Impact of Macroeconomic Policy on the growth and development of Small Scale Industry in Nigeria using macroeconomic variables such as Gross Domestic Product (GDP), Small and Medium Scale Enterprises Loan (SMEL), Investment (INV), Inflation Rate (INF) and also interest rate. This research was analyzed by explaining with some economic models being developed by some Industrious economic scholars. The research recommend that government should invest early and ambitiously in basic equity and the focus of the conventional financial institutions should be on large scale farmer which must go beyond agricultural insurance, guarantee schemes and sectoral allocation. It also outline what farmers ought to enjoy and fiscal policy measures which the government should make use of an …
Can this topic “Mentoring and Career Progression of Teachers in Private Primary Schools” be used for Education Project?
Yes it can be utilized for research — The study investigated the relationship between mentoring and career progression of teachers in Lagos State Education District V1. Four research questions and four hypotheses were formulated and tested in the study. The study adopted the descriptive survey research design. The sample was made up of 250 teachers in Education District V1 of Lagos State randomly selected from Government approved private primary schools in the 5 Local Government Areas in the District. A researcher constructed questionnaire titled “Mentoring and Career Progression of Teachers”(MCPT) Descriptive questionnaire was used for data collection. The demographic information of the participants was presented using simple percentages while independent T-test, Pearson Product Moment Correlation Co-efficient were used to test the hypotheses at 0.05 level of significance. The …
Is the topic “Design and Implementation of a Computerized Mathematics Teacher” recommended for Computer Science (CS) Project?
Yes it is highly recommended — Computerized Mathematics Teacher is the process of capturing, developing, sharing, and effectively using organizational, it refers to a multi-disciplinary approach to achieving organizational objectives by making the best use of knowledge in mathematics. The aim of the study is to develop a Computerized Mathematics Teacher using algebraic learning as a case study. In achieving this aim, the following specific objectives were set out as follows to develop a software that will: facilitate quick response to students complaints or challenges is guarantee, enable the students or staff link to various instant massages platform of Computerized Mathematics Teacher Systems, assist the students or staff make better contribution, and facilitate instant feedback to students with challenges of Algebra in Mathematics. The motivation for …
Can the material for “Sanitary Practices and Implications on Students Health” be used as a guide for Environmental Science Project?
Yes it can be used — The study was carried out to find out the implications of sanitation practices on students health in Ugbowo, Benin City. Primary data were sourced through survey method of questionnaire. Spot observation of facilities and staff handlers supported the survey. The data sample size of 250 respondents drawn through random sampling technique was adopted. in this order: 12% were administered to staff at the Health Centre, 20% to staff of Works and Service Units, and 16% to staff in other Departments. The remaining 52% were administered to Students. The data were analyzed using simple descriptive statistical tables and percentages. The secondary data for this work were obtained from Health Centers’ documents, literature reviews of related works and text books .The findings …
Can this topic “Problems and Prospects of Duck Farming” be used for Agricultural Engineering (AE) Project?
Yes it can be utilized for research — This project work was carried out in Ovia North West Local Government Area of edo state to examine the problems of duck farming within the area. 5o questionnaires were distributed among farmers in the local government but there response where only analyzed using simple frequency and percentages. From the analysis it was revealed that 30% the farmers attributed the problem of duck farming to disease condition which 80% identified some other problems. The result further revealed that 80% of the respondents attribute the non acceptance of duck meat of superstitions belief another 8% of the respondents further stated that there is no ready market for ducks and ducks raised are reared for family consumption, it was discovered that duck have …
Can the material for “Male Adolescents’ Knowledge, Perceptions and Attitudes Towards HIV / AIDS Prevention” be used as a guide for Nursing (Science) Project?
Yes it can be used — The study was carried out to investigate the knowledge, perceptions, and attitudes of male adolescents towards Human Immunodeficiency Virus / Acquired Immunodeficiency Syndrome (HIV/AIDS) in order to institute meaningful preventive measures for the control of HIV/AIDS infection in Burutu Local Government Area of Delta State. Investigations showed that HIV/AIDS can induce social exclusion and ostracism. Some kids struggle because of the constant taunting and bullying at school and in the community, which can result in low self-esteem and feelings of loneliness. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. Primary data were collected from the primary source which questionnaire was used as an instrument of data collection …
Is the topic “Design and Simulation of a Personal Computer Temperature Control System” recommended for Computer Science (CS) Project?
Yes it is highly recommended — Temperature determines the survival of all natural creatures and as well the operational fitness of all scientific invention, it is quite important to every aspect of human endeavor and its control is as important as the temperature itself. This research work centers its study on temperature and its control with a view of designing and implementing a reliable computerized system that will automatically contribute in temperature control. The new system will be able to automatically detect temperature within a particular environment at a particular time and be able to give the desired output concerning the aim of its development. The new system pivots its temperature on room temperature, controlling the regulation of the room air conditioning system for good up- keep of …