Project Topics | Seminar Topics | Related Topics
Effect of Overhead Cost on the Selling Price of a Product

EFFECT OF OVERHEAD COST ON THE SELLING PRICE OF A PRODUCT


ABSTRACT

This write up discuss: “Effect of Overhead Cost on the Selling Price of a Product”. A case study of UNILEVER PLC. This research was carried out using various research methods such as questionnaire and interview. Result from the relevant data collected are presented in tabular form and analysis made. All possible solution and assistance headed on the Effect of Overhead Cost on the Selling Price of a Product were discussed in the recommendation and conclusion.


CHAPTER ONE

1.0 Introduction

1.1 Background Of The Study

In view of the cost of manufacturing which involves the conclusion of raw material to finish goods through the utilization of labour and overhead support, therefore, the (3) three basic element of manufacturing cost are direct labour, direct material and production overhead. The selling price of a product bring the separation of cost into both manufacturing costs, which are useful at the stage of introducing period cost and product cost.

Tuned Aderibigbe (1999) proves that in a merchandising company, the cost of good sold during a given period is obtain by adjusting purchase during the period with the difference between, the closing and opening stock of goods. However, in the case of manufacturing company, the cost of good sold is obtained by adjusting the cost of good manufacturing during that period with the difference between the opening stock and the closing stock of finish goods. But, inorder to determine the cost of goods manufactured during that period, we must first of all adjust the difference between the beginning and the ending work in progress. So far, in an attempt to find the cost of a group of units of product, we don’t have much problem because we can trace the production overhead cost as the part of the cost that are necessary for the production of such product. Beside, the production stage of a company like “UNLIEVER PLC” relies on the quality, branding experience of its products and service respectively for the sole determinant of its success or achievement of marketing goals.

Bell Martins (1999) of marketing concept and strategy, where he analyse pricing as a crucial aspect of the sale appeal. Though, pricing is one of the importance of marketing mix. It must determine the price of a products as it is obviously known that it is the price charged by a company on it product that will determine if the product will succeed or fail and which can make the company records losses or profit. A company like “UNILEVER PLC”. Relies on the ability of its sales function for achievement of its marketing objectives, where emphasis is heavily placed on sales management issues. As far as I am concern on the steps toward the charging of overhead cost to the units, all overhead cost that are trace able to the various costs centers are first dealt with, that is, the process of charging to a cost center the overhead costs, arises solely because the cost must be incurred solely by the cost center. The effect of overhead costs of “UNILEVER PLC” on selling price of a product could be obtained through the indirect material, clock cord payment for product workers who have spent their time on the maintenance of equipment, along side with invoices from suppliers and agencies for electricity bills, rents, rates and petrol among other items.


1.2 Statement Of The Problem

In this present time of poor economy situation of the country, there has been a persistence race of poor variance on the cost of a product, which mostly was due to the lack of control. The primary motive of a firm is to set a standard on its product inorder to achieve its goal and objectives. Thus, the need for the satisfaction parameter to be enjoy by the society at large is that, any company that makes profit must be able to enjoy more people thereby satisfying an essential aspect of the societal need. Unfortunately, some organization concentrate more on manufacturing as only the conversion of raw material to finished goods through the utilization of labour and overhead without paying much attention to the cost of good sold during a given period.

As some organization face serious unfavourable returns, “UNILEVER PLC” is facing a serious profit squeeze. Hence, this project will analyze the effect of overhead cost control on the selling price of product, that could considerably enhance a company.


1.3 Objective Of The Study

The aim and objective of this research work are:

  1. To know the activities involve in the physical charging of raw materials to finish goods.
  2. To identify the process of charging to cost center of a fair share of common item of cost.
  3. To identify the actual overhead cost that can be trace directly to each cost center.
  4. To know that the differentiation of actual overhead and absorbed factory overhead is essential.
  5. To know that the marketing sales and subsequent services to the output of a business is an essential role to be played on the selling price of a product.

1.4 Historical Background Of Lever Brothers Nig. Plc

Lever Brother Nigeria Plc, a leading company in the industrial sector is involved in the manufacturing and marketing of detergent, soap, skin cream, tooth paste, squash drink, edible oils, and fats tea and coffee as well as range of petroleum jelly and other personal care product. The company was established in 1923, when its was incorporated as a private company under the name Lever Brother (W.A) Limited, in 1924, the name was later changed to West African Soap Company Limited and later Lever Brother Nigeria Limited in 1955, when the company went public in 1979, it subsequently changed its name to Lever Brother Nigeria Limited. In compliance with the company and Allied matter degree 1990, the company substituted the word “limited in the name of “PLC” to become Lever Brother Nigeria Plc. Inorder to ensure sustained focus in management, the company now has four manufacturing sites for its operation from the Original Six viz, Apapa the premier and largest site, produces soaps such as Sunlights, Key; OxBar, Lux, Breeze, life and buy astral and some other personal products such as tooth paste and Vaseline range. The second oldest site Aba is devoted to the product of non soapy detergents, powders and bar actions of non soapy detergent, powders and bars, Third newest of plants, commissioned in 1983, is the ultral modern food factory in Agbara, where the company produced Royco, Blue Band, Planta, Treetop, Oroyo and of course the fourth, the Oregun site where popular personal product Band like Elida Pears, Satin Sheen, Lotus etc are product. It is intended to consolidate all the personal product production Toothpaste and Vaseline range at this site ultimately. The aim of the company is to lead in out core market of fast consumer product and achieve strong profitable growth by the best at identifying and meeting consumers need through delivery of superior valued products. The objective of the company is to bring in expatriates who are willing and able to work in Nigeria and who will contribute as well as to help train Nigeria Lever Brother Nigeria Plc. Has been dedicated to the production of top quality product/brands for Nigeria for over Seventy years.


1.5 Significance Of The Study

It is a common knowledge that when there is boom, management of ten employs less of the overhead cost techniques. They can afford to incure more cost, as the effect of such cost will not be felt on the over all profit. However, in the period of depression management often try to employ all the method of overhead cost to minimmnize cost benefit analysis of a product. This will further make the management to employ effect cost of product techniques so as to minimize the selling price of product.


1.6 Research Questions

  1. How can the process of charging to cost center of a fair share of common item of cost can be identify.
  2. How can we identify the actual overhead cost that can be trace directly to each cost center.
  3. How essential is the differentiation between the actual overhead and absorbed factory overhead.
  4. What is the role played on the selling price of a product by the marketing sates and subsequent services to the output of a business.
  5. What are the activity involved in the physical charging of raw material to finish goods.

1.7 Definition Of Terms

Overhead:

There are cost which are not part of prime cost. It is the addition of all indirect cost.

Adverse Variance:

This occur when the actual cost is greater than the standard or budgeted cost

Value Of Chain:

This is all activities that are needed to be carried out before a consumer received the final product.

Product Stages:

This relies on the quality, branding, experience of its product and services for the sole determinant of its success.

Selling Stages:

This relies on the ability of its sales function for the achievement of its marketing objective where emphasis is heavily placed on sales management issues.

Budget:

This is a statement of planned actions in monetary terms indicating revenue to be generated, expenditure to be incurred and capital items to achieve a given objective for particular time or period.


CHAPTER TWO

2.0 Literature Review

2.1 Introduction

The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …


Procedure for Downloading the PDF (Docx) Material


Effect of Overhead Cost on the Selling Price of a Product can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.


Seminar Material Cost
₦3,000
Project Material Cost
₦5,000




TABLE OF CONTENTS

PRELIMINARY PAGES


CHAPTER ONE

INTRODUCTION


    • 1.0 Introduction
    • 1.1 Background …

    CHAPTER TWO

    LITERATURE REVIEW

    • 2.1 Introduction
    • 2.2 Conceptual Review
    • 2.3 Theoretical Framework
    • 2.4 Empirical Studies

    CHAPTER THREE

    RESEARCH METHODOLOGY

    • 3.1 Introduction
    • 3.2 Research Design
    • 3.3 Population of Study
    • 3.4 Sampling and Sampling Technique
    • 3.5 Validation of Research Instrument
    • 3.6 Method of Data Collection
    • 3.7 Method of Data Analysis
    • 3.8 Questionnaire Administration
    • 3.9 Ethical Consideration
    • 3.10 Statistical Analysis

    CHAPTER FOUR

    DATA ANALYSIS, RESULT AND DISCUSSION

    • 4.1 Introduction
    • 4.2 Presentation and Analysis of Data
    • 4.3 Re-statement of Research Questions
    • 4.4 Test of Hypotheses
    • 4.5 Discussion of Findings

    CHAPTER FIVE

    SUMMARY, CONCLUSION AND RECOMMENDATION

    • 5.1 Introduction
    • 5.2 Summary of Findings
    • 5.3 Conclusion
    • 5.4 Recommendation
    • 5.5 Suggestion for Further Study

    REFERENCES

    APPENDIX A - “QUESTIONNAIRE”


    Disclaimer for Complete Material Utilization

    The displayed research work titled "Effect of Overhead Cost on the Selling Price of a Product" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.


    Frequently Asked Questions (FAQ)


    Can the material for “Sustainable Democracy: A Dependent Variable to National Development” be used as a guide for Political Science Project?

    Yes it can be used — The primary aim of this research work is to deeply investigate and identify the national development in the achievement of sustainable democracy in anambra state, and how their attitude foster, encourage, promote or retard the development of the area since the formation of the anids. To conduct a thorough research, the researcher sampled the population and those chosen were administered with questionnire. There findings were analyzed using simple percentage method. Based on the analyses the researcher found that anambra state with a laudable development strategy that is development oriented and which has the peoples interest at heart. Sequel to the above, the researcher recommended that government should support and assist both financially and otherwise to the development projects initiated and …


    Can the material for “Proximate Composition and Mineral Analysis of Soya Beans and Maize Flour Enriched with Edible Insects (Toad, Esisu)” be used as a guide for Microbiology Project?

    Yes it can be used — The study examines the Proximate Composition and Mineral Analysis of Soya Beans and Maize Flour Enriched with Edible Insects (Toad, Esisu). In achieving this aim, the following specific objectives were laid out to identify the Proximate Nutrients and Energy Composition of Soya Beans and Maize Flour Enriched with Edible Insects, determine the Mineral Concentrations of the Flour Sample of Soya Beans and Maize Flour and analyze the minerals and proximate content of soya bean in order to explore its nutritional values in human and animal diets. The standard procedures were followed to analyse the proximate compositions and mineral concentrations of soya bean flour. The caloric value was calculated from crude protein, crude fat, crude fiber, carbohydrate, moisture and ash content. …


    Is the topic “Technical College Electrical Installation Students Safety Skills Needed in Handling Equipment” recommended for Vocational Education Project?

    Yes it is highly recommended — The study sought to determine the safety skills required by technical college electrical installation students in handling equipment. The study was carried out in Plateau and Kaduna States. A survey research design was employed for the study. The population for the study was 80 comprising of 39 electrical installation teachers and 41 electrical installation workers in the field. The entire population was used for the study. A structured questionnaire item was used for collecting data from the respondent. Four research questions were developed to guide the study and four null hypotheses were formulated and tested at 0.05 level of significance. Mean and standard deviation were used to analyze the data for answering research questions while t-test for independent samples was used …


    Is the topic “Antimicrobial Activity and Phytochemical Analysis of Aqueous and Methanoic Extract of Celosia Argentea” recommended for Pharmaceutical Technology / Science Project?

    Yes it is highly recommended — Celosia argentea is used traditionally for the treatment of wounds, dysentary, fatique, menstral bleeding, osteoporosis, Atheros-clerosis etc. This investigation was aimed to analyze the phytochemical (phyto constituents) that is present in the aqueous and methanoic extracts of celosia argentea leaf and also the antimicrobial activity of celosia argentea leaf extracts. It was done to extract the bioactive compounds from this medicinal plant which permits the demonstration of their physiological activity. The powdered leaf was subjected to extractions using a polar solvent which was distilled water (100ml) and 100ml of methanol using soxhlet extractor. The anti-microbial activity was also carried out by inoculating different micro-organisms like staphylococcus aureus, Escherichia Coli, Streptococcus spp, Pseudomonas aeroginosa, candida albicans and Aspergillusniger into different nutrient agar …


    Can the material for “Online Clearance System for Graduating Students” be used as a guide for Computer Science (CS) Project?

    Yes it can be used — Online clearance system is an application software that allows the users to check their clearance status as whether they are in any way indebted to the school, fill and submit their clearance form, and obtain their clearance letter from registered emails. The aim of the study is to design and implement an Online Clearance System for Graduating Students. In achieving this aim, the following specific objectives were set up as follows to design and develop an application system that will effectively and efficiently process students’ clearance using an android phone, Alleviate the problems and stress of traveling and queuing up of students during clearance and provide a reliable and transparent system devoid of personal inclinations and interest. The methodology adopted …


    Can the material for “Strategies for Managing Disciplinary Problems Among Secondary School Students” be used as a guide for Education Project?

    Yes it can be used — This study is aimed at investigating strategies for managing disciplinary problems among secondary school students in Izzi Local Government Area of Ebonyi State. Four research questions were formulated to guide the study. Survey research design was used for the study. The population for this study was five thousand, six hundred (5,600) students from eighteen (18) public secondary schools in Izzi Local Government Area of Ebonyi State. A simple random sampling technique was adopted to draw ten (10) secondary schools from the study area. Also simple random sampling was used to draw (37) students from each of the ten (10) secondary schools chosen for the study, which gave a total of three hundred and seventy (370) respondents as sample for the …


    Can the material for “Effect of Materials Management on Resource Utilization in Organization” be used as a guide for Human Resource Management (HRM) Project?

    Yes it can be used — This project (research) work is titled “Effect of Materials Management on resource utilization in Organization”. The researcher carried on investigation to determine the impact of effect of materials management on resource utilization in organization as it affect organization’s productivity and output in the field of resource control and management. The researcher went further to talk about the side effect of lack of adequate materials and resources used in industrial or manufacturing situation and the consequences it has placed the country at large. The researcher drew up questionnaire and administered them on forty six (46) staff of the company (Senior and junior staff). Only closed –ended questions were used in designing the questionnaire. Thus the questionnaire method was used in gathering the …


    Can the material for “Design and Implementation of Online Pilgrims Registration System” be used as a guide for Computer Science (CS) Project?

    Yes it can be used — Online pilgrims’ registration is the creation and use of an online registration form. The aim of the study is to design and implement an Online Pilgrims Registration System. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will backup database containing pilgrims' files to avoid unforeseen disasters and enable qualified pilgrims register for pilgrimage using an internet accessible device. The motivation that led to the implementation of the proposed system is that pilgrims undergo difficulties when registering and sometimes they spend days or weeks going to and fro before they complete their registration. Also, the manual method of pilgrim’s registration, storage and retrieval of files could take a whole lot …


    Can the material for “Design and Implementation of Payment Monitoring Information System” be used as a guide for Computer Science (CS) Project?

    Yes it can be used — Design and Implementation of an Online Payment Monitoring Information System is a research work that will help build an effective information management system for Ekiti State University within the computer science department. The designed software will serve as a more reliable and effective means of documenting Fees payment and cash payment and eliminate errors associated with the manual method of recording payment details. This project work made use of data collected from the school library, faculty, department and some online websites. The aim of this project work is to achieve the following; to effectively and efficiently process student’s department fees payment and document it, to provide a reliable and transparent system devoid of personal inclinations and interest and to provide …


    Can the material for “Role of the Nigerian Agriculture and Co-Operative Bank in Agricultural Financing” be used as a guide for Banking and Finance (BF) Project?

    Yes it can be used — The major function of the Nigerian Agricultural, co-operative, Rural and Development Bank is provision of loans and advances to individual and corporate farmers. However, there are series of reasons for the need for special funding towards agricultural sector. The agricultural sub-sector is saddled with peculiar risks, risks that can hardly be diversified; illiteracy and ignorance; culture; interest rate, etc Loan defaults occur when the borrowers can not meet up the repayment of principal and interest within the maturity time stipulated by the bank. Loan defaults have continued to increase tremendously, and it forms the major discouraging factor to the NACRDB in loan or credit extension. Furthermore, tin the course of financing agriculture the NACRDB is faced with series of problems. Such problems i9clude …



    Chat with us on WhatsApp