DESIGN AND SIMULATION OF AN INDUSTRIAL ARM WITH A MICROPROCESSOR
CHAPTER ONE
The Problem And Its Setting
Introduction
Most industrial arm system are driven from magnetic tape or paper tape. A few are driven by a computer which enables them to make decisions.
- Using the same computer handles task and trajectory planning as well as controlling the trajectory of the industrial arm system and hand by computer first calculates a trajectory and then executes it by driving the arm along it. Two exception to the kind of system architecture are the control system proposed for the Robot Popeye at the Charles stark draper laboratory.
- The stand ford research institute unmated control system is composed of a PDP-10 time-shared computers as a command computer,PDP-15 as a control computer and a Nova 1210 as a sensor.
- The system described here consist of a supervisory computer which handles scene analysis, task and trajectory planning routines and a microcomputer which control arm motions, the supervisory computer can be a minicomputer or a time- shared computer.
In the system under development, a HP-2100A is used as the supervisory computer and an Intel MCS-4 microcomputer as a control processor. The micro-compution monitors arm and hand joint potentiometers as well as hand touch and slip sensors and power supply pressure sensors, and maintains current joint position in the stationary mode.
Arm motion is described to the microcomputer in the form of job. A job consists of a sequence of macro-command with joint positions and constraints on force levels and trajectories. An example for a simple job would be!
- Move to position,
- Hold project,
- Move to new position,
- Release object.
After transferring the job description to the MCS-4, the HP-2100A continues processing global routines. The MCS-4 interprets the macro- commands, executes them utilizing the feedback information from joint potentiometers and sensors, and interrupts the HP-2100 when the job is terminated. It then transfers the final joint positions and status of the sensors to the HP- 2100A and holds the joint in position until the next job request is received.
Statement Of The Problem
There has been a growing realization of the need and importance of industrial arm service because of its role in a developing society like ours. It is because of this role, like speeding of business activities working activities, engaging easy performance of job are expected. It is necessary to find out the problem people encounter with the heavy project of construction. The heavy materials are being handled by the machine called microprocessor-based industrial arm. In fact, we have many problem that this machine can solve like picking hot objects in a industry etc.
If solved, it will surely change the lives of our people and also prejudices in accepting the development as a result of this, the project work is titled the industrial arm.
Statement Of The Subproblem
Since my statement of problem state that computer technology is at the center of a new industrial revolution which has trans formed modern life, we must have a sub problem of how it functions, the sub computers that makes it work. Picture of the object you are defending in your project.
Hypothesis Of The Study
The system called industrial arm consisting of a supervisory computer and microcomputer has a role of controlling the arm joint position, the scene analysis task and trajectory planning routines in a big firm for lifting up heavy objects.
Scope Of The Study
With all these limitation which include having time constraint and difficulties to visit university library insufficient of information from text books in the available library and financial problem to visit area to research more about the project, it is hoped that this research will provide a meaningful and informative guide on the problems of industrial arm service.
The Need For The Study
The need of the study is to have the knowledge that machine can have on artificial intelligent for their working system.
Other who will find this project important are the future researchers and follow students who may pick up this work form the library. This researcher also benefited from this work as it exposed him to things he could not have come across ordinarily.
Finally, this study will be of immense help to any person that will be as students as a manager else where.
Definition Of Terms
Addr
Address
A/D
Analog-to- digital, indicating conversion
ADCD
12B
Analog
Pertaining to data in the form of continuously variable physically quantities
MUS
Multipexer
Clutching
Is used is holding object fithly
Control line
Control box or part carry the synchronization and control information needed
Date
Unprocessed information
End job
End of the execution
EOC
End of control
Extension
Additional equipment of the same line.
Flag bit
A character that signal the occurrence of some condition, such as the end of a word
HP-2100
Supervisory minicomputer
Hand elevate
To increase up its hand
Lack
A serialization mechanism by which a specific resources is restricted for use by the holder of the lock
MCS-4
Micro computer
System block
A collection of machine and method organized in data processing
Wrist
Is the part joint before the hand.
Rotate
To move round to it or bits.
Assumption For The Study
The following assumptions were made?
- It is assumed that the computer technology is at the center of a new industrial revolution which has transformed modern life.
- Robots arm structure is performing a similar job a human being does better.
- Must of the industrial machine are introduced from foreign country with artificial intelligent for easy execution of jobs.
Organization Of The Study
This study on the industrial arm service in big form has been grouped into following sections to enhance the success of the work.
Chapter one with the introduction of microprocessor-based industrial arm. Other section like statement of the problem definition, the sub problem, the hypothesis, the limitation, the delimitations, definition of terms, the assumptions the need of the study and finally, the organization of the study.
Chapter three presents the design of the study which includes the introduction, the component, the procedures for the design, the circuit diagram, the flow chart for the design and the program for the design.
In chapter four, it expounded on the presentation and analysis of the design, which involves the introductions, the detail analysis of the design and the general analysis.
Finally, the chapter five gives the summary, the conclusion, the recommendation for the suture research, bibliography and appendix.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Simulation of an Industrial Arm with a Microprocessor can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Simulation of an Industrial Arm with a Microprocessor" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Is the topic “A Comparative Study of the African and the European Regional Systems for Protection of Human Rights: Lessons for Africa” recommended for Political Science Project?
Yes it is highly recommended — African and European human rights systems are usually described as young-ineffective and old-effective respectively. Though plenty of scholarly works exists about the two systems, there is lack of comparative studies which tries to elicit similarities and differences between the two systems. Other than providing a descriptive account of the African system and categorizing it as young and ineffective, the existing literatures particularly failed to point-out lessons which can be drawn from experiences of the categorically effective European system. Therefore, by employing the Most Similar Systems Design of the comparative approach under the general qualitative framework, utilizing descriptive and exploratory techniques and based on documentary sources of information, this study examined the similarities and differences between the European and African human …
Can the material for “The Influence of Socio-Economic Status on Academic Achievement Among Senior Secondary School Students” be used as a guide for Education Project?
Yes it can be used — The study examined the influence of socio-economic status of parents on students’ academic performance at the secondary level in selected public secondary schools in Surulere Local Government Area of Lagos State. Also, this study reviewed some relevant and related literatures under sub-headings. The descriptive research survey was applied in this study for the assessment of the opinions of the selected respondents for this study, with the use of the questionnaire and the sampling technique. A total of 200 (n=200) respondents were sampled for this study. Five null hypotheses were formulated and tested, with the application of the t-test and Pearson Product Moment Correlation tools at 0.05 level of significance. Some of the research hypotheses that were formulated and tested are as …
Can the material for “Design and Development of a Computer Aided Tutor for Teaching Basic Programming Language” be used as a guide for Computer Science (CS) Project?
Yes it can be used — BASIC is an acronym for beginners’ all-purpose symbolic instruction code which is developed to teach beginners the basic constructs of programming theory and as much, one of the easiest programming languages to learn. As a high level programming language program code written in written in BASIC must be translated to its equivalence in machine code before it can be executed on the computer. The aim of the study is to design and implement a Computer Aided Tutor for Teaching Basic Programming Language. In achieving this aim, the following specific objectives were laid out to create an interaction through the tutor, which gives the student the feeling of being aided by a teacher and facilitate instant feedback to students with challenges …
Can the material for “Design and Implementation of an Online Detection and Prevention of Phishing Attack” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Phishing attack is a simplest way to obtain sensitive information from innocent users. The aim of the phishers is to acquire critical information like username, password and bank account details. The aim of the study is to design and implement an online detection and prevention of phishing attack. In achieving this aim, the following specific objectives were laid out to develop an application software that will provide information about the current website phishing threats and prevention measures, evade blacklists attackers uses creative techniques to fool users by modifying the URL to appear legitimate via obfuscation and many other simple techniques and detect Uniform Resource Locator (URL) with phishing tools such as; website forms and email address prompts. The motivation that …
Can the material for “Civil Society Organization and Democratic Consolidation in Nigeria and Ghana, 2003 – 2013” be used as a guide for Political Science Project?
Yes it can be used — Civil Society Organizations played an instrumental role in the restoration of democracy in Nigeria and Ghana and in recognition of their important role in democratic transition in both countries they were considered by both scholars and international organizations as a veritable tool for democratic consolidation. The argument that CSOs aid democratic consolidation in both countries and account for the dissimilarities in democratic consolidation necessitated this study. Therefore, the study examined the nexus between civil society organizations and democratic consolidation in Nigeria and Ghana and noted like in other studies that CSOs in both countries suffer from lack of unity, communication gap, inadequate personnel, among others. Hence, this study deduced that civil society organizations in both states perform similar functions and share …
Can the material for “Power Supply and the Performance of Small and Medium Scale Industries in Nigeria From (1986-2010)” be used as a guide for Economics Project?
Yes it can be used — This research work centers on the power supply and the performance of small and medium scale industries in Nigeria from 1986 − 2010. carrying out this study, secondary data were collected and empirical analysis was made to achieve these objectives, multiple regression were used in anglicizing the data. In investigating this problem, the researcher introduces 2 hypotheses that power supply changes has no significant in Nigerian econometric mode were used for evaluation and testing of the hypothesis. The researcher made use of the ordering least square (OLS). The out come of the model shows and confirms that power supply changes has a negative impact on Nigerians. And that a unit change in power supply has a positive impact on both the …
Can the material for “A Study of the Negative Impact of Technological Development on the Secretary in a Modern Office” be used as a guide for Office Technology and Management (OTM) Project?
Yes it can be used — A secretary is an office-staff who combines the mastery of secretarial skills of typewriting and shorthand with office routine functions. The study examined the Negative Impact of Technological Development on the Secretary in a Modern Office. In achieving this aim, the following specific objectives were laid out to examine the kind of modern technology that exists in the organizations, appraise the changes which technological advancement can cause in the duties of secretaries and recommend measures for blending the job of the secretary and sophisticated modern equipment in achieving high productivity in offices. The problem of this study is that many secretaries has been displaced in the office while many others have been hindered from securing a good job by the …
Can the material for “The Relevance of Jesus’ Teaching in Matthew 6:10 for the Promotion of God’s Kingdom Among the Methodist Faithful in Calabar (Ma)” be used as a guide for Religious Studies Project?
Yes it can be used — The study is to scrutinize the Relevance of Jesus' Teaching in Matthew 6:10 for the Promotion of God's Kingdom among the Methodist Faithful in Calabar. In achieving this aim, the following specific objectives were laid out to exegete the concept of the kingdom of God in the scriptures and relate it to Methodist Church Nigeria, Diocese of Calabar today and encourage Methodist Church Nigeria as a whole to be resilient in promoting the kingdom of God in Nigeria. In Matthew 6:10, Jesus projected the urgency, priority, need and pattern for the promotion of the kingdom of God, which many have either not understood or failed to heed. The fact that many Methodist congregations in Calabar are satisfied with their beautifully …
Can this topic “A Stylistic Analysis of Some Selected Poems of Wole Soyinka” be used for English Language Project?
Yes it can be utilized for research — Language and style never moves beyond a concentration on the supremacy of words. These words somehow contain meanings style is effectively language manipulated in ways that signal it as different from ‘ordinary’ language. A stylistic analysis of the selection of some Wole Soyinka’s poems is carried out to educate, explicate and expose to everybody that comes across this write up, in guiding them on how to analyze. The data used to illustrate and substantiate our claims are systematically sourced from some selected poems of Wole Soyinka. The lexico-syntactic patterns and choices, the phonological, morphological and graphological devices are the main stylistic elements used to prove our claims. Finally, we find that each of the elements however, has identifiable functions which …
Can the material for “A Critical Assessment of Micro Finance Banks and Their Contribution to the Development of Small Scale Enterprises in Nigeria” be used as a guide for Finance Project?
Yes it can be used — This project work is carried out to examine the contribution of micro finance banks to the development of Small and medium scale enterprises in Nigeria. The Brass micro finance bank is used as a case study. Data were collected through a well structured questionnaire and the information elicited from the respondents were analyzed through tabular presentation of data, frequency distribution and percentages. The findings revealed that Microfinance banks have contributed immensely to the development of small scale business in Nigeria and most especially Small Business Ventures. However, it was discovered that the small scale businesses are beset with myriads of problems which can be solved through an improvement in the service of Micro finance banks by the government. …