DESIGN AND IMPLEMENTATION OF LIGHTING SWITCHING CONTROL SYSTEM (INTERFACE)
CHAPTER ONE
1.1 Introduction
Switching control is a good replacement for conventional pneumatic or Electro chemical high voltage AC control. This equipment is capable of not only control but energy management and system diagnostic functions. The PC control in inherently has more accurate control because it reduces maintenance and recalibration problems common with pneumatic and mechanical systems. It offers other unique advantages like subsystem coordination, optimum start, diversity analysis and retrofit identification. The importance of light to every mankind cannot be over emphasized, even when the earth was created; the earth was illuminated with light which makes it a place of living. This means, without light, the whole world is in darkness and as a result of this, living things be it plants, animals or human beings cannot exist. Since the invention of electrical energy for lighting, it is quite obvious that it requires human intervention to control the switch either off when not in use or ONM when the need arises.
As a prelude to other parts of this study, this chapter will discuss the background upon which this study was initiated, the statement of problems that led to this study, the Aim and Objectives of the study. Others are Significance of the study, Scope of work, Limitations of the Study and Definition of technical terms.
1.2 Background of Study
Traditionally, high control in home and office environments takes place through switches (on/off), deals and sliders (dimmers) and sometimes motion sensors. These controls can be incorporated in the built environment such as walls, or attached to lights that people place themselves (desk lamps, bed side lights). This often leads to a jumble of controls each with their own location, interaction style, and focus.
The proposed system is a demonstration of how a PC can be used as a control signal generation subsystem capable of generating programmable control signals for power equipment. Early studies reveal that using PC for power management was often fou7nd to be up to 25% more than energy star compliant methods. However, recent assessments have found higher rates, and was estimated that for power management.
This design begins with the fact that a computer is needed to light bulbs of high AC rating. This immediately suggests that an interface of the PC is needed to handle the mismatch in voltage and currents between the PC and bulbs. Secondly the control data from the PC program are logic levels in serial format and at high frequency. This again means that the interface should understand the protocol of communication and convert it to the necessary parallel control singed.
Due to lack of resources, the project will not be real but simulated. This system will represent for more than just manual on/off control. The system comprises of two major components, output device, and input device. Output devices work behind the scenes to control the lights by switching them off or on. Input device are the switcher i.e. The button or sensors.
1.3 Statement of Problem
Investigation revealed that the existing system has no prior information whether a bulb is dead or not, there is always a problem of one or two poles using one switch. That is each pole with a switch which could amount to lots of expenses and each pole with their own switch and location.
Also, it consumes ones time in the sense that one will more from one pole to another. Just to put one or off the light.
1.4 Aim and Objectives of the Study
The aim of the study is to design and implement a Lighting Switching Control System (Interface). In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will:
- Use a serial interface hardware built on microcontroller and max 232 serial converters;
- Control, manage and diagnose energy system diagnostic functions;
- Keep track of all lighting activities, especially bulbs;
- Help reduce the cost of prepaid meter utilization; and
- Ensure that the high negative -15 volts and + 15 volts of the serial RS232 comport is converted and programmed to suit the CPC logic levels.
1.5 Significance of Study
The proposed system is relevant considering the fat that only a push of a button can switch off or on the light connected within the system. With this system, one can easily be on his/her bed and switch off or on the lights. The system is safe therefore children can also switch off or on the light when their parents or guardians are not close. The system is very necessary in the sense that it gives you what you want at any needed time. The system also keeps track of all activities (bulb).
This study will be of immense benefit to other researchers who intend to know more on this study and can also be used by non-researchers to build more on their research work. This study contributes to knowledge and could serve as a guide for other study.
1.6 Scope of Study
The scope of the research is focused on the Design and Implementation of Lighting Switching Control System (Interface).
1.7 Limitations of the Study
During the course of this study, many things militated against its completion, some of which are:
- Time Constraint: The time frame given to accomplish this project was very short due to school academic calendar and it was carried out under pressure which made the researcher not to implement some necessary features.
- Establishment Policies: Establishment policies posed a serious limitation as most staffs are not ready to release information needed for this project work. There were lots of information needed from the staffs of this institution to enhance the study which took them time to release or they did not release at all for security purposes, hence the scope was reduced.
- Research material: availability of research material is a major setback to the scope of the study.
- Frequent power failure: This made the researcher append more money on fuel to ensure sustainable power.
- Financial Constraint: Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information and in the process of data collection (internet).
1.8 Definition of Terms
Management: It is the co-ordination of all the resources of an Organization through the process of planning, Organization, directing and controlling
System: Physical component of a computer that is used to perform certain task.
Data: Numbers, Text or image which is in the form suitable for Storage in or processing by a computer, or incomplete information.
Information: A meaning full material derived from computer data by organizing it and interpreting it in a specified way.
Electrochemical: describe a mechanical device that is powered or controlled by electricity. Relating machines powered by electricity.
Pneumatic: the branch of physics with the mechanical properties of air and other gases.
Retrofit Identification: To modify something such as a machine or a building by adding newly developed parts or devices that were not available where the machine or building was made.
System: Set of computer equipment and programs used together for a particular purpose.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Implementation of Lighting Switching Control System (Interface) can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Implementation of Lighting Switching Control System (Interface)" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Implementation of Lighting Switching Control System (Interface)" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Is the topic “Problems of Personnel Management in Government Owned Establishment” recommended for Personnel Management Project?
Yes it is highly recommended — Personnel Management in simple terms means the act of getting people together to accomplish desired goals. The study was conducted to examine the problems prevalent in the personnel department of government owned establishment using Suleja Local Government as a case study. The study went ahead to investigate the problems of the personnel department and to identify some factors which militate against the effect of the inefficiency on the staff of the personnel department and the establishments at large. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 250 (two hundred and fifty) respondents were selected for this study to represent the entire population of …
Can the material for “The Impact of Disaster Risk Management on the Development of Small Scale Business” be used as a guide for Business Management Project?
Yes it can be used — The study examines the impact of disaster Risk Management on the development of small scale business in Northern Nigeria. The research questions that guided this study were: How effective is disaster risk management on local institutions in Northern Nigerian? What is the implication of mitigating disaster risk on small scale business in Northern Nigeria? How do Northern states access funds to manage risk associated with disaster? How does policy and operational support at state and federal level affect disaster risk management in Northern Nigeria? The survey method was used as the research design. The entire population of 35 person from NEMA and SEMA in five northern state with a population of 200 persons . A questionnaire design in five likert …
Can the material for “Kinetic Study of Acid Hydrolysis of Manihot Esculentus (Cassava Starch)” be used as a guide for Biochemistry Project?
Yes it can be used — The study examines the Kinetic Study of Acid Hydrolysis of Manihot Esculentus (Cassava Starch). In achieving this aim, the following specific objectives were laid out to investigate the acid hydrolysis of cassava starch, investigate how different fermentation times influence the quality characteristics of Starch, produce Starch from cassava at controlled conditions of temperature, relative humidity and time, and monitor the fermentation time for breakdown and removal of cyanogenic compounds and cyanide. Acid hydrolysis of cassava peel (CP) to reducing sugar (RS) was undertaken at 70, 90 and 110 o C, and 0.5, 1.0 and 1.5 M concentrations of H 2 SO 4 . Kinetics and thermodynamics of the study were tested for their statistical consistency using analysis of variance (ANOVA). The RS was characterized for …
Can this topic “The Impact of Financial Literacy on the Profitability of Small Scale Enterprises” be used for Entrepreneurship Project?
Yes it can be utilized for research — The focus of this research is on the impact of financial literacy on the profitability of some small scale enterprises in Calabar Municipality, Cross River State. An enquiry into their level of adoption of financial literacy was also studied. A review of related literatures was carried out to examine the extent of work done in the field. A carefully structured questionnaire was used to collected data on the level of adoption of financial literacy and also a financial literacy test. Stratified random sampling was adopted to divide the small scale enterprises into ten (10) strata, thereafter random sampling technique was employed. A sample of one hundred and fifty (150) respondents was used to carry out the study, which encompasses the different …
Can the material for “The Role of Managers in Effective and Efficient Management of an Organisation” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — The topic of this study is “The Roles of Managers in Effective and Efficient Management of The Organization” “A case study of Nigeria Breweries Plc, Ibadan, Oyo State. The company has a population of about 200 staffs. Yaro Yamani formular was used to find the sample size which is 150 and that was the number of questionnaires distributed. The objectives of this study is to ascertain The extent to which managers can have a substantial impact on performance and organization’s success or failure cannot be over emphasized. Managers establish the type of climate which facilitates motivation and successful performance of the organization. Managers play important role in an organization’s life. They direct, guide, influence, facilitate and coordinate the activities in …
Can the material for “Design and Implementation of an Online Loan Scheme Management System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — A Loan scheme management system is designed to handle back office operations of financial institutions offering different types of Loans. Loan Lending is the principal business activity for most commercial banks. The loan portfolio is typically the largest asset and the predominate source of revenue. The aim of the study is to design and implement an Online Loan Scheme Management System. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will allow bank customers to easily access loans without stress or visiting the banks, analyze the loan sanctioning procedures of the applicants and assist the end-user in identifying the credit worthiness of the borrowers. The motivation that led to the …
Can the material for “Assessing the Role of Staffing on the Performance of Micro Finance Organizations” be used as a guide for Finance Project?
Yes it can be used — The research title ‘Assessing the role of staffing on the organizational performance in micro finance organizations’ was carried out in Awing central Cooperative Credit Union Limited Bamenda, North West region Cameroon. This thesis was carried out based on the observation that in most micro finance organizations in Cameroon, the technique of staffing used is the concur method; where examinations are written and successful candidates are selected for training which in most cases is a furtherance of class room work guided towards professionalism which is not a proper staffing procedure. This study is arranged into five different structures; introduction, review of related literature, presentation and analysis of data and recommendations. Research questions were issued and some found responses in the literature reviewed. …
Can this topic “Design and Implementation of Data Mining for Medical Record System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — Data mining is the extraction of hidden predictive information from large database which helps in predicting future trend and behavior thereby helping management make knowledge driven decisions. The data mining tool designed is to aid in quick access and retrieval of patients information to avoid time wasted in retrieving of such data from hospitals data warehouse. The data mining tool was also designed to discover hidden pattern that helps in decision making by management. Structured System Analysis and Design Methodology were used in the analysis of the existing system which also provided a guide for the design of the proposed system. PHP programming language and my SQL was used in the creation of a data warehouse for patient”Ÿs information and data …
Is the topic “The Effect of Human Relations on the Performance of a Secretary in an Organization” recommended for Human Resource Management (HRM) Project?
Yes it is highly recommended — This study was conducted to ascertain the effect human relations on the performance of a secretary in an organization, Research have shown that the position of a secretary and human relations in an organization and the fact that most secretaries failed to exhibit good human relations between their colleagues and the general public which may negatively influence the organization in achieving their objective and goals. The objective of this research is to find out the effect of human relation on the performance of a secretary in an organization, to be able to consider the effect of human relations on the performance of a secretary in an organization, questionnaire and interview method was employed as a source of data collection. Data were …
Can this topic “Design and Construction of an Electronic Billboard (EBB)” be used for Computer Science (CS) Project?
Yes it can be utilized for research — With the advent of technology, most tasks undertaken by man have now been overtaken by semi-conductor devices applicable in the areas of communication industry. In industrial, commercial and recreational establishment, there is always the need to reach the public. The faster this is done, the better. In this project: design and construction of an Electronic Bill Board (EBB), which is a display device that converts electrical signals transmitted from electronic devices into optical signals using Light Emitting Diodes (LEDs). The EBB saves time, gives better visual effects and attraction, where it is used in adverts and other forms of attractive and urgent information dissemination. …