DESIGN AND IMPLEMENTATION OF A COMPUTERISED QUALITY CONTROL SYSTEM FOR A MANUFACTURING ORGANISATION
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Implementation of a Computerised Quality Control System for a Manufacturing Organisation (A Case Study of S.E.D.I Enugu) can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Implementation of a Computerised Quality Control System for a Manufacturing Organisation" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Implementation of a Computerised Quality Control System for a Manufacturing Organisation" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Television News of Mother Tongue Interference in English News Cast” be used as a guide for English Education Project?
Yes it can be used — Language and man are inseparable and since the languages of the world come in contact, there is bound to be a problem like mother tongue interference which is a sociolinguistic phenomenon. This work takes for granted that grammatical competence is totally different from phonological competence and it has worked on this premise using phonological conventions in analysing the sampled data. The findings proved that interference at the phonological level is a major problem confronting our media houses in Nigeria with respect to spoken English. Suggestions have been proffered to effect the envisaged repair in the aspects identified. …
Can the material for “The Role of Bank of Industry Towards the Development of Small Scale Enterprises in Nigeria” be used as a guide for Entrepreneurship Project?
Yes it can be used — This research work is conducted on the role of bank of industry towards the development of small scale enterprises. The aims and objectives of the study is to analyze the various role played by bank of industry in developing small scale enterprises as well as the activities of government policies, such as provision of infrastructural facilities. The researcher uses the questionnaire and interview method to collect the data from the respondents. The analysis and crossed tabulation of data gathered were done using the mean statistical method with the 1-5 Likert rating scale for proper accuracy in arriving at a dependable decision rule. Lastly the researcher concluded that, the bank of industry was able to maintain its customer because they do …
Can the material for “Impact of Insurance Market in Financial Sector Development in Nigeria” be used as a guide for Industrial Relations and Personnel Management (IRPM) Project?
Yes it can be used — Insurance is one of the cornerstones of modern day financial services sector. In addition to its traditional role of managing risk, insurance market activity, both as intermediary and as provider of risk transfer and indemnification, may promote growth by allowing different risks to be managed more efficiently, promoting long term savings and encouraging the accumulation of capital. The main objectives of this work it to examine the impact of insurance market activities on financial sector development in the Nigeria economy. Secondary data were applied in carrying out this research work, ordinary least squares and unit test was used to analyse it. The results showed and unit root test was used to analyse it. The results showed a positive and significant impact. …
Can the material for “The Relevance of Product Innovation on the Marketing Performance of an Organization” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — This research work is on relevance of product innovation on the marketing performance of an organization. A Case Study of Diamond Bank PLC, Warri. Its objective is to determine the relationship between product innovation and the growth banks. This study is limited to Diamond Bank PLC, Warri. Due to the fact that the population is low the same number is adopted as the sample size for this research work which is eighty (80). The statistical tool used is the chi-square. One of the hypotheses of this research work is H0: there is no significant relationship between product innovation and organization marketing performance. H1: there is a significant relationship between product innovation and organization marketing performance. After the analysis, it was …
Can the material for “The Impact of Educational Technology on Vocational and Technical Education” be used as a guide for Vocational and Technical Education Project?
Yes it can be used — This study investigate “The Impact of Education Technology in Vocational and Technical Programmes in Nigerian Colleges of Education” In order to achieve maximum level of accuracy and give a fair treatment to the problems unclear, the researcher adopted a method of data collection with the use of questionnaire the population sample was drawn for the student of vocational education, the total population used for the research was fifty (50) students. Educational technology serves as basis for vocational training that makes student to be self reliance and employers of labour and also teaching and learning of vocational skills is not completed without the use of educational technology. …
Can this topic “The Relevance and Challenges of Computer Networking in Nigeria Banking Industry” be used for Computer Education Project?
Yes it can be utilized for research — With the present banking system in the country the computer network has become important in the banking sector as the banks officers and customers have began to appreciate accessibility, credibility and consistency of the network system in the banking industry. The method should be qualitative and analytical which will involve complication of facts, use of tables, testing of hypothesis, establishing relationship and drawing references based on the information collected. Moreover, from the analysis through questionnaire, direct interview and observation, this study should be able to prove that fact that despite all problem of the computer network system in the banks that have started the implementation like communication problem from NITEL, software problem, the system is still required in the banking operations …
Can the material for “The Effect of Radio Advertising Time on Consumer Behaviour” be used as a guide for Mass Communication (MC) Project?
Yes it can be used — Radio advertisements drive consumers to remember messages differently in reference to the favorite programme, such beliefs of listeners help advertisement to stay atop of the mind and consumers unconsciously associate with it as a personally relevant information and have an enduring impact on their emotions. The study investigates the Effect of Radio Advertising Time on Consumer Behaviour using Orient FM as a case study. In achieving this aim, the following specific objectives were laid out to examine the broadcast of advertisements on radio has positive impact on urban commuters towards conceiving and sharing information and evaluate the radio advertisements motivating and capable of driving arousal among consumer behavior. The research design used in this report is descriptive design, utilizing questionnaire …
Can the material for “Knowledge, Attitude and Practice of Care of the Elderly Patients Among Health Workers” be used as a guide for Nursing (Science) Project?
Yes it can be used — Care of the elderly is the fulfillment of the special needs and requirements that are unique to senior citizens. It covers such services as assisted living, adult day care, long term care, nursing homes, hospice care and home care. The aim of the study is to examine the Knowledge, Attitude and Practice of Care of the Elderly Patients among Health Workers in Jos University Teaching Hospital. In achieving this aim, the following specific objectives were set out as to examine the level of knowledge of the care of the elderly affects health workers, determine the factor influencing health workers attitude of care towards the elderly and ascertain the attitude of health workers towards care of the elderly in Jos University …
Can the material for “Attitude and Perception of Nursing Mothers Towards Exclusive Breastfeeding in Kagarko Local Government Area of Kaduna State” be used as a guide for Public Health Project?
Yes it can be used — The purpose of the study was to investigate the attitude and perception of nursing mothers towards exclusive breastfeeding In Kagarko Local Government Area of Kaduna State. The research design was descriptive survey. The sample size was three hundred (300) mothers. The instrument for data collection was a validated questionnaire with reliability coefficient of 0.80. Data were subjected to descriptive statistics. Hypothesis was tested using a Chi-square test analysis, major findings showed that majority of the respondents had high knowledge 178 (59.3%). The overall practice was highly adequate with grand mean of 3.03. There was a significant association between level of knowledge and practice of exclusive breastfeeding with minimum expected count of 14.08 with 3 degrees of freedom. Based on the findings it …
Can this topic “The Impact of Maternal Nutrition on Infants' Exclusive Breastfeeding” be used for Nursing (Science) Project?
Yes it can be utilized for research — Breast milk is regarded as perfect, natural and protective food for newborns. The study was carried out to investigate the Impact of Maternal Nutrition on Infants’ Exclusive Breastfeeding. In achieving this aim, the following specific objectives were laid out to investigate the effects of maternal nutrition on exclusive breastfeeding of infants and identify the effects of maternal occupation on the actualization of exclusive breastfeeding. Investigation revealed that the importance of exclusive breastfeeding cannot be overemphasized. Government at all levels and health practitioners have embarked on various health outreaches to encourage exclusive breastfeeding for the first six months of the infant’s life. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents …