
DESIGN AND IMPLEMENTATION OF A COMPUTERISED MATERIAL STOCK CONTROL SYSTEM FOR A MANUFACTURING ORGANISATION
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Implementation of a Computerised Material Stock Control System for a Manufacturing Organisation can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
![]() | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Implementation of a Computerised Material Stock Control System for a Manufacturing Organisation" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Implementation of a Computerised Material Stock Control System for a Manufacturing Organisation" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Is the topic “Influence of Peer Group Pressure on Adolescent Smoking Behavior” recommended for Education Project?
Yes it is highly recommended — Peer groups are an informal primary group of people who share a similar or equal status and who are usually of roughly the same age and interact within the social aggregate. The study carried out to examine the Influence of Peer Group Pressure on Adolescents Smoking Behavior among Undergraduate Students in Tertiary Institutions in Ado-Ekiti Local Government area of Ekiti State. In achieving this aim, the following specific objectives were laid out to examine the effects of peer group pressure on adolescent smoking behavior and analyze the negative effects of smoking on adolescent’s health. Influence of Peer Group Pressure on Adolescents Smoking Habits has more than ever before being posing serious threat to adolescent health. As such, government, parents and …
Is the topic “The Effect of Exchange Rate on the Nigerian Balance of Payments” recommended for Economics Project?
Yes it is highly recommended — This work sets out to examine the relationship between balance of payment and exchange rate. The work is divided into five chapters; chapter 1 gives a general introduction to the subject matter, chapter two gives the general review of literature in the subject matter, chapter 3 gives or states the methodology and specifies the model used for testing. Chapter four runs the required test and provides the result as well as the interpretation and chapter five concludes the findings and recommends policy for the government based on the findings in the test.The ordinary least square regression (ols) method is used to test for R-squared test (explanatory power of the variables), T-test for the reliability, F-test for the overall significance of the …
Can this topic “Potentials of Growing Energy Crops for Biotechnology Among Cassava and Jatropha Farmers” be used for Biotechnology Project?
Yes it can be utilized for research — This study assessed the Potentials of Growing Energy Crops for Biotechnology Among Cassava and Jatropha Farmers in Delta State. The specific objective was to identify the socio economic characteristics of cassava and jatropha farmers, their source of information, their major energy sources, their perception on the efficiency/cost effectiveness of the energy sources, production level of cassava and jatropha and the production constrains. A multi stage sampling procedure was used to select 3 local governments and 50 farmers from each village. Data was analyzed using frequency counts, percentages, mean and standard deviation while the Pearson correlation was used to test the hypothesis. The result showed that majority of the respondents were between the ages 21-30 (50%), 23(46%) were males, (42.5%) were B.Sc …
Can the material for “The Role of Nigerian Commercial Banks in National Economic Recovery” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — As a nation progresses through previous stage of economic growth and development, expectations regarding the role of banks in economic growth development and social mobilization assume greater and weightier dimension. This situation becomes more pronounced when nation is going through the trauma of economic recession, as Nigeria is currently experiencing. The economic recession has necessitated the examination of the role of commercial banks in revitalizing the economy through a more effective functioning and better attention to the bank − customer relationship. Most learned educationists have succinctly presented a manage of the expectations of government and the public on the role of banks on National economic recovery efforts they identifies the problem of the Nigeria commercial banks as. Absence of the will to adhere …
Is the topic “Design and Implementation of a Computerized Birth Registration Information System” recommended for Computer Science (CS) Project?
Yes it is highly recommended — Birth registration is part of national civil registration systems that also record marriages and deaths. The aim of the study is to design and implement a Computerized Birth Registration Information System. In achieving this aim, the following specific objectives were laid out to develop an online system that can be easily used to register births and implement a system that can be used to obtain reports of birth rate. The motivation that led to the implementation of the proposed system is as a result of the difficulty encountered in determining the birth rate in different regions and time consumption during manual recording of birth rate information. The methodology adopted in this study is the structured system analysis and design methodology …
Is the topic “Design and Development of a Web Based Students' CGPA Results Determination Software” recommended for Computer Science (CS) Project?
Yes it is highly recommended — Comprehensive Grade Point Average (CGPA) Computation System is the process of calculating students GP and record in the primary, secondary school and higher institution of learning. This project deals with the calculation of Grade Point (GP) in higher institution. The existing method in Federal Polytechnic Nekede, Owerri is the tedious manual process therefore the write up consists of detail of grade point and the various problems associated with it. The objective of this project now is to provide a more authentic reliable and efficient Grade Point Average Computation System to minimize the errors and the tedious nature of the manual system. The motivation that led to the implementation of the proposed system is that grades are not based on effort, …
Can the material for “Extraction and Stabilization of Aloe Vera Gel From the Plant” be used as a guide for Industrial Chemistry Project?
Yes it can be used — The study was conducted to extract and stabilize the Aloe Vera Gel from the Plant. It was discovered that choosing an effective Aloe vera product is difficult according to research investigation. The long chain sugars in aloe vera gel, which are responsible for the plant's healing properties, are broken down by enzymes as soon as a leaf is cut, so proper handling and stabilization of the plant are crucial. Though cold processing is thought to best retain the beneficial properties, commercial stabilized gel products might not perform as well as the fresh gel. The Aloe Vera leaves procured are thoroughly washed by fresh water to remove dust and foreign matter and later graded by hand. The outer skin and the exudates …
Can the material for “Assessment of Mortgage Institution in Facilitating Affordable Housing through Public Private Partnership” be used as a guide for Estate Management (EM) Project?
Yes it can be used — The study assesses the Mortgage Institution in Facilitating Affordable Housing through Public Private Partnership in FCT, Abuja. In achieving this aim, the following specific objectives were laid out to examine the role of private partnership in house finance, delivery and maintenance and ascertain the level of investment in housing delivery and maintenance in facilitating affordable housing through Public Private Partnership in FCT, Abuja. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 250 (two hundred and fifty) respondents were selected for this study to represent the entire population of the study. For null hypotheses were formulated and tested using the one-way ANOVA and the …
Can the material for “Impact of Public Agriculture Expenditure on Agricultural Output and Economic Growth” be used as a guide for Economics Project?
Yes it can be used — The impact of public expenditure on agriculture in Nigeria is enormous. Government having recognized agriculture as the second highest sector after oil of which the country depends for food, employment and foreign exchange. This project work would summarize the magnitude and composition of governments’ expenditure on agricultural sector since 1960 The project also examines that contribution of agriculture towards Gross Domestic Product (G.D.P), between the year 1960 when Nigeria got independent and up till the beginning the oil boom in the early 1970s. Underutilization of revenue derived by the government could bring about a downturn in the economic growth, it is with this in mind that the study intend to achieved by examine the impact of public Agriculture Expenditure on the …
Can the material for “Liquidity Management Practice At First Bank of Nigeria” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — Liquidity represent the ability to most efficiently accommodate decrease in deposit and fund increase in the loan portfolio, that is to meet the customers loan request fund commitment and line of credit. A bank has liquidity when it has the ability to sufficient cash in a timely manner of a reasonable cost. The cost of obtaining liquidity is a function of market condition and the degree of risk reflected in the balance sheet. Those who are involved in the management of the source and the use of fund fund deposit in the commercial bank are raised to some degree. There will be a thorough research to prove how the bank has been managing their liquidity and profitably. In this cause, both secondary …