
DESIGN AND IMPLEMENTATION OF A COMPUTER BASED BILL OF MATERIAL PROCESSING SYSTEM
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Implementation of a Computer Based Bill of Material Processing System can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
![]() | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Implementation of a Computer Based Bill of Material Processing System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Implementation of a Computer Based Bill of Material Processing System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “The Effect of Instructional Strategies in In-cooperation of Local Wisdom on Secondary School Students in Teaching Chemistry in Sokoto State” be used as a guide for Science Education Project?
Yes it can be used — The study was carried out to determine the Effect of Instructional Strategies in in-cooperation of Local Wisdom on Secondary School Students in Teaching Chemistry in Sokoto State. In achieving this aim, the following specific objectives were laid out to examine the influence of discussion method on the academic performance of chemistry students, and determine the effect of demonstration method on the academic performance of chemistry students. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. Primary data were collected from the primary source which questionnaire was used as an instrument of data collection while secondary data were sources from textbooks, journals, newspapers and the internet were employed. …
Can the material for “The Banking Industry in Nigeria” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — Fraud is an awful phenomenon, which like a vein has invaded Nigeria banking industries and the society in general, and puts any organization that it comes into in a distress point or in a state of liquidation. This study highlights the nature and various types of fraud in banks, effects of ban fraud and control measures adopted by management to check fraud incidents. Frauds in the banking system should as much as possible be minimized as it kills the bank and destroys the economy of a nation. Finally, the research work adduced that continuous vigilance should be the watch work if fraudulent practices are to be reduced and possibly eliminated in banking industry. Proposal Impact Of Frauds In The Banking Industry In Nigeria Frauds in …
Can the material for “The Impact of International Trade on the Development of Commerce and Industry in Nigeria” be used as a guide for Public Administration (PA) Project?
Yes it can be used — The project set out to examine the impact of international trade on the development of commerce and industry in Nigeria, the variables used for this study are GDP, Volume of Import, Volume of Export, Net Export and Trade Openness. The methodology used is Ordinary Least Squares (OLS) and E-new software package. The main objective of this study is to examine the relationship between international trade and economic growth, and to examine the impact of international trade on the development of commerce and industry in Nigeria. The T-test is used to determine the significance of the individual parameter estimates. The F-test is used to determine the significance of the entire regression plan. The regression result shows that NEXP (Net Export) and …
Is the topic “The Role of Commercial Banks in Financing Small Scale Industries in Nigeria” recommended for Banking and Finance (BF) Project?
Yes it is highly recommended — The topic of dissertation is The Role Of Commercial Banks In Financial Small Scale Industry In Nigeria. A case study of union bank of Nigeria plc. The major objective of the study is to ascertain the extent to which union bank ofNigeriaplc has helped to financial small scale industries/. Instrument of data collection is questionnaires and research questions which formed the source of primary data, while materials from various published articles, textbooks, journals and newspaper formed the secondary data. The method of analysis is the use of tables, percentages and chi-square . The major finding of the research is that union bank ofNigeriaplc has helped to financial small scale industries period under review. The recommendation based on the finding is that in order to reduce …
Can this topic “Public Relations as a Veritable Tool for Eradicating Cultism in Nigerian’s Tertiary Institutions” be used for Mass Communication (MC) Project?
Yes it can be utilized for research — The research work provides a brief historical perspective to the issue of using public relations as a veritable tool in eradicating cultism in the Nigeria eradication system. The many destructive tendencies of cultism are also highlighted alongside the educational sub-sector, with particular reference to the tertiary institution. The study was carried out to investigate the Public Relations as a Veritable Tool for Eradicating Cultism in Nigerian’s Tertiary Institutions using Federal Polytechnic Auchi as a case study. In achieving this aim, the following specific objectives were laid out to know the reasons for joining cultism on campus and examine the policies and programmes of AUCHIPOLY management in cubing cultism. The research design used in this report is descriptive design, utilizing questionnaire …
Can the material for “Role of Liabilities Management and Assets in Distress Resolution in Nigerian Banking Sector” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — The study investigates the role of liabilities management and assets in distress resolution in Nigerian banking sector. The purpose of the research is to examine whether the establishment of bridge banks would help develop the Nigerian banking industry, to establish weather bridge banking has helped in distress resolution. The survey research design was adopted with of special questionnaires to employee of central bank of Nigeria as well as a staff of the two bridge banks in Nigeria. Frequency distribution table was used for data presentation with percentage method for data analysis as chi-square test was used for hypothesis. It was discovered from empirical information/response that bridge banking not only helps in distress resolution but also in the development of the …
Can the material for “ANTISEPTICS” be used as a guide for Science Laboratory Technology (SLT) Project?
Yes it can be used — The study examines the antiseptics relevance in pathogen elimination. In achieving this aim, the following specific objectives were set out to; analyze the efficacy of several antiseptics against some pathogens, examine the growth inhibition zones of pathogens for analyzed antiseptics Pathogen, and examine the antiseptics usage in eliminating pathogen in human skins. Antiseptics are chemicals that people apply to the skin. They can reduce the number of microorganisms living on the skin, in wounds, and in mucous membranes. Investigation reveals the problems of the antiseptics research work; a lot of people suffer from pathogen contraction as a result of non antiseptics material usage, insufficient information relating to the growth inhibition zones of pathogens for analyzed antiseptics Pathogen, and inadequate analysis …
Can this topic “Companies Income Tax and the Nigeria Economy; Challenges and Prospects” be used for Economics Project?
Yes it can be utilized for research — The major objective of this research is to explore the relationship between company income tax in Nigeria and economic development of the Nation. The researcher proposed three hypotheses towards addressing the study’s objectives and both primary and secondary sources of data are used in generating the necessary data for that purpose. These data are presented and analyzed by the use of tables, chi-square and regression model of analysis. The findings reveal that there is a significant relationship between companies’ income tax in Nigeria and economic development of the Nation and that tax evasion, tax avoidance and corruption are major hindrances to revenue generation. The study also reveal that perceived government failure to effectively provide basic infrastructural facilities discourages companies from willingly …
Can the material for “The Effect of Thermal Conductivity and Viscosity on MHD” be used as a guide for Physics Education Project?
Yes it can be used — The effect of variable viscosity and thermal diffusivity on MHD boundary layer flow of dusty fluid flow over a stretching sheet has been investigated. The aim of the study is to investigate the Effect of Thermal Conductivity and Viscosity on MHD. In achieving this aim, the following specific objectives were laid out to investigate the effect of variable fluid viscosity, magnetic parameter, variable thermal conductivity parameter, fluid interaction parameter, Prandtl number and Eckert number on the flow behavior and heat transfer process, investigate the effect of variable fluid viscosity, magnetic parameter, variable thermal conductivity parameter, fluid interaction parameter, Prandtl number and Eckert number on the flow behavior and heat transfer process, and analyzed the effect of thermal radiation and variable …
Is the topic “Transportation Cost Variation and Its Effect on Agricultural Product” recommended for Agricultural Engineering (AE) Project?
Yes it is highly recommended — This research is focused on the effect of transportation cost variation on agricultural produce in Benin city of Edo State. It has been discovered that transportation and socio-economic development are closely related. This is also to introduce students and indigenes of Edo State to the problem and reason for the low standard of socio-economic development in Edo State. The various sectors such as agriculture, industry, trade and marketing, education and health services, forestry and other social infrastructures are aggregated to constitute what is so called socio-economy. It therefore, means that an improvement in this sector will elevate the socio-economic standard of living. Transportation is one of the factor that has a higher degree of relationship to the level of socio-economy …