DESIGN AND CONSTRUCTIONS OF A ROBOT CONTROL SYSTEM USING RF MODULE
ABSTRACT
The robot control using an RF module is simply a robotic system whose control and functioning is achieved by the use of a radio frequency based remote. This project implements the principle of artificial intelligence to develop a mobile robot that is controlled using the hand held remote device controlled from a distance away from the robots position. The project is implemented with 8051 microcontroller which forms the heart of the project. The microcontroller controls both the remote control and the robot controlled in the project. The 8051 microcontroller is used to make all the necessary calculations that are required for the operation of the robot.
The robot also consists of the RF module which is simply a radio frequency transmitter and a receiver pair which has the ability to support digital operations. The system comprises of the transmitter unit and the receiver unit. The transmitter is implemented on the hand held control unit (remote) of the project which is used to send the control signals required for the directional control of the robot while the receiver decodes the transmitted message and uses the signal to control the operation of the robot.
The project also consists of the LCD (liquid crystal display) unit which is used to display all necessary information required for the operation of the project. In the operation of the project, the user simply selects the direction he requires the toy car shaped robot to run and this is transmitted to the receiver which in turn decodes the massage and uses the information to control the robot to the desired direction.
CHAPTER ONE
Introduction
1.1 Background Of The Study
A robot is a mechanical or virtual intelligent agent that can perform tasks automatically or with guidance, typically by remote control. In practice a robot is usually an electro mechanical machine that is guided by computer and electronic programming. Robots can be autonomous, semi-autonomous or remotely controlled. Robotics can be described as the current pinnacle of technical development. Robotics is a confluence science using the continuing advancements of mechanical engineering, material science, sensor fabrication, manufacturing techniques, and advanced algorithms.
There is no one definition of robot which satisfies everyone and many people have their own. For example Joseph Eagleburger, a pioneer in industrial robotics, once remarked: can’t define a robot, but I know one when I see one.” According to the Encyclopedia Britannica a robot is “any automatically operated machine that replaces human effort, though it may not resemble human beings in appearance or perform functions in a humanlike manner.” The word “robot” comes from the Czech word “Robota,” which means “slave-like labor “ or “forced-work”. Merriam-Webster describes a robot as a “machine that looks like a human being and performs various complex acts (as walking or talking) of a human being”, or a “device that automatically performs complicated often repetitive tasks”, or a “mechanism guided by automatic controls”, Robotics can be defined as the science or study of the technology primarily associated with the design, fabrication, theory, and application of robots. While other fields contribute the mathematics, the techniques, and the components, robotics creates the magical end product. The practical applications of robots drive development of robotics and drive advancements in other sciences in turn. Crafters and researchers in robotics study more than just robotics.
When societies first began developing, nearly all production and effort was the result of’ human labor, as well as with the aid of semi- and fully domesticated animals. As mechanical means of performing functions were discovered, and mechanics and complex mechanisms were developed, many tasks began to require less for human labor.
Machinery was initially used for repetitive functions, such as lifting water and grinding grain. With technological advancement more complex machines were slowly developed, such as those invented by Hero of Alexandria (in Egypt) in the 1st century AD and the first half of the second millennium AD.
Robots in antiquity and through the Middle Ages were used primarily for entertainment. However, the 20th century featured a boom in the development of industrial robots. Through the rest of the century, robots changed the structure of society and allowed for safer conditions for labor. In addition, the implementation of advanced robotics in the military and NASA has changed the landscape of national defense and space exploration. Robots have also been influential in the media and profitable for toy manufacturers. Robots began as entertainment for royalty. Inventors such as Al-Jazari and Leonardo Da Vinci worked to build automatons for their benefactors. Al-Jazari built a floating band that resembled humans and performed various songs and drum beats depending on the programming of a series of pegs. Da Vinci created an automation based on the knight’s armor. It could stand and move its arms and neck, as well as open its mouth. Since the invention of the robots, many designs of robots have being made for various functions in the world all the various robots are designed for their specific functions and thus there is specialization in their operation. The robot that is designed in this concept is specialized for industrial use in such places a production, security and home cleaning. (http:llwww.ehow.com).
1.2 Objective Of The Study
- The aim of this project is to design a robot that is controlled using a wireless means, radio frequency to be precise
- The main objective of implementing this project is to practically apply all the electrical and mechanical engineering principles that have being studied.
- The project also examines the application principles of embedded systems and how to use these principles to implement expert systems. And f to put the principles of artificial intelligence into real life application.
1.3 Significance Of The Study
In today’s modem life, technology has contributed in peoples lives in many ways. Especially robotic systems with artificial intelligence can perform many industrial duties and getting to be increasingly important for some people However, there are those who think that robots have negative effect on people and can bring extreme danger in the future. These points of view must be addressed accordingly It has also been proven, that robotic systems have benefited in many ways. For instance, few robots have helped children with developmental disabilities; others have improved the health status of people with different deficiencies. People who have experienced therapy robots in their lives have commented that robots brought confident in their lives as well as solved problems with their health. The other fact is that in some industrial countries robots are helping children with deficiencies to develop faster arid have influenced positively to their behavior.
1.4 Scope Of The Study
The project covers a wide range of areas of applications that include the use of the robot for room cleaning function; the robot can also be used’ in a manufacturing process to transfer materials from one end to another. It also, finds an important application in security surveillance systems where they can be used as a spy machine. They can also be used by the military for security and surveillance. The project based on its design is expected to carry an additional weight of about 1kg and can be controlled at a range of about 10 Meter from the place where the robot is placed and also has the ability to run for a couple of hours.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Constructions of a Robot Control System Using RF Module can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
- 1.0 Introduction
- 1.1 Background of the study
- 1.2 Objective of the study
- 1.3 Significance of the study
- 1.4 Scope of the study
- 2.0 Literature review
- 2.1 Introduction
- 2.2 Historical Review of Robots
- 2.3 Review of Related Project Works
- 2 Embedded System
- 2.5 Description of the Project
- 2.6 Modification from Other Designs
- 3.0 Design and construction
- 3.1 Acquisition of Research Materials
- 3.2 Project Design
- 3.2.1 The power supply unit
- 3.2.2 The Rectification
- 3.2.3 The Filtration
- 3.2.4 The Voltage regulation Unit
- 3.2.5 The MCU oscillation input unit
- 3.2.6 Finding the period circle
- 3.2.7 The reset circuit
- 3.2.8 The Microcontroller Unit
- 3.2.9 Features ofAT89S52:
- 3.2.10 The Keyboard Unit
- 3.2.11 The Concept of RF Transmission
- 3.2.12 Properties of RF
- 3.2.13 Brief Description of RE
- 3.2.14 RE Advantages
- 3.2.16 RF Disadvantages
- 3.2.17 RE Transmitter
- 3.2.18 Factors Influenced to Choose STT-433MHz
- 3.2.19 Pin description
- 2220 Features
- 3221 RF Receiver
- 3.2.22 The Relay Driver Unit
- 3.2.24 The LCD Display Unit
- 3.2.25 The System Operation
- 3.3 System Circuit Diagram
- 3.4 Construction
- 3.4.1 Constructional Layout Design:
- 3.4.2 Assemb1y Placement of Components.
- 3.4.3 Soldering Process
- 3.4.4 The Mechanical Fabrication Unit
- 4.0 Result and Analysis of Data
- 4.1 Testing and Results
- 4.2 Cost Analysis of the Project
- 5.0 Conclusion and Recommendation
- 5.1 Recommendation
- 5.2 Conclusion
REFERENCES
APPENDIX
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Constructions of a Robot Control System Using RF Module" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
- 1.0 Introduction
- 1.1 Background of the study
- 1.2 Objective of the study
- 1.3 Significance of the study
- 1.4 Scope of the study
- 2.0 Literature review
- 2.1 Introduction
- 2.2 Historical Review of Robots
- 2.3 Review of Related Project Works
- 2 Embedded System
- 2.5 Description of the Project
- 2.6 Modification from Other Designs
- 3.0 Design and construction
- 3.1 Acquisition of Research Materials
- 3.2 Project Design
- 3.2.1 The power supply unit
- 3.2.2 The Rectification
- 3.2.3 The Filtration
- 3.2.4 The Voltage regulation Unit
- 3.2.5 The MCU oscillation input unit
- 3.2.6 Finding the period circle
- 3.2.7 The reset circuit
- 3.2.8 The Microcontroller Unit
- 3.2.9 Features ofAT89S52:
- 3.2.10 The Keyboard Unit
- 3.2.11 The Concept of RF Transmission
- 3.2.12 Properties of RF
- 3.2.13 Brief Description of RE
- 3.2.14 RE Advantages
- 3.2.16 RF Disadvantages
- 3.2.17 RE Transmitter
- 3.2.18 Factors Influenced to Choose STT-433MHz
- 3.2.19 Pin description
- 2220 Features
- 3221 RF Receiver
- 3.2.22 The Relay Driver Unit
- 3.2.24 The LCD Display Unit
- 3.2.25 The System Operation
- 3.3 System Circuit Diagram
- 3.4 Construction
- 3.4.1 Constructional Layout Design:
- 3.4.2 Assemb1y Placement of Components.
- 3.4.3 Soldering Process
- 3.4.4 The Mechanical Fabrication Unit
- 4.0 Result and Analysis of Data
- 4.1 Testing and Results
- 4.2 Cost Analysis of the Project
- 5.0 Conclusion and Recommendation
- 5.1 Recommendation
- 5.2 Conclusion
REFERENCES
APPENDIX
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Constructions of a Robot Control System Using RF Module" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can this topic “The Impact of Salary Increase and Fringe Benefits Among Nigerian Workers” be used for Human Resource Management (HRM) Project?
Yes it can be utilized for research — This project works was examined from all its ramification, what could be the possible effect of salary increase and fringe benefits among Nigerian workers. It is believed that when salaries and fringe benefits are increased, the aim is to alleviate the sufferings of workers in regards to increasing their purchasing power and meeting the high cost of living. But, the consequence which will come quickly to mind is that many job will be lost and very little created. Employers will pay higher wages, but will do so at the cost of retraction in their labour force. Those who have been desperate for job will sink further into desperation and more would join them through retrenchment. In analyzing the affect on workers, …
Is the topic “Evaluation of Saw Dust Ash as Mineral Filler in Asphalt Mixture” recommended for Civil Engineering Project?
Yes it is highly recommended — The quest for economy in asphalt production using locally available materials necessitated this research which is aimed at evaluating the suitability of Saw Dust Ash (SDA) as mineral filler in asphalt mixture.Chemical analysis, sieve analysis, specific gravity and plasticity index tests were performed on SDA. Asphalt briquettes prepared using Ordinary Portland Cement (OPC) without saw dust as filler serve as the control. SDA was used to replace the Portland cement at 0% to 100% at an interval of 10% by weight. Marshall Test was conducted on all briquettes produced with SDA and OPC. Results of tests show that increase in SDA resulted in reduction in the value of bulk density. It was also observed that the total voids in the mix …
Can the material for “The Impact of Value Added Tax on Nigerian Economic Growth (1994-2010)” be used as a guide for Economics Project?
Yes it can be used — This paper analyzed empirically the impact of Value Added Tax (VAT) on economic growth in Nigeria from 1994-2010. Data was collected from Central Bank of Nigeria (CBN) statistical bulletin. Ordinary Least Square techniques was used to estimate the model, which reveals a strong positive significant impact of VAT on economic growth in Nigeria. Therefore, this study recommends that the VAT should not be high on the infant industries, so as to enable them grow. …
Can the material for “Design and Implementation of an Online Outpatient Management System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Outpatient Management is an information system that is used to record relevant information relating to the patients. The prescribe drugs, bought drugs, sold drugs and available drugs are processed by the program. The aim of this project is to design an Online Outpatient Management System. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will capture and store patients drug data for a teaching hospital, generate bills of each patient drug administered and execute a proper recording of patients’ drugs and diagnosis result and keep track of list of patients’ beds occupied and vacant. The motivation that led to the implementation of the proposed system is that the existing system …
Can the material for “The Impact of Poor Revenue Generation on the Development of Local Government Areas” be used as a guide for Public Administration (PA) Project?
Yes it can be used — Revenue generation is the nucleus and the path to modern development. Thus, the study was to assess the impact of poor revenue generation on the development of Local Government Areas. This is because local government as the third tier of government and the closest to the people especially in the rural areas needed revenue to provide basic social amenities to the people. But it is unfortunate to note that the local government management have not lived up to expectation especially to provide basic social amenities to the rural people. Thus, the objective of the research was to analyze the extent to which poor revenue generation had affected the development of those areas. The researcher used primary and secondary methods of …
Can this topic “A Pragmatic Study of the Interface Between Informativeness and Conciseness in the Language of Advertisement of the Nigerian Print Media” be used for English Language Project?
Yes it can be utilized for research — Language is the chief medium of communication used for all forms of social interaction, the most important of which is passing and receiving information and messages. Advertisement also a form of communication, relies on language to pass its message in order to attract consumers to what it is advertising. This study, which is a pragmatic analysis of the interface between informativeness and conciseness in the language of advertising of the print media, focuses on the informative content as well as the conciseness of the adverts. Information cues such as price, quality, nutrition, packaging availability etc are used to assess the informative content of the adverts. An advert that contains one or more of these cues, is regarded as informative. The study …
Can the material for “Management Challenges Facing Mass Transit Programme in Nigeria” be used as a guide for Public Administration (PA) Project?
Yes it can be used — This research explains the Management Challenges Facing Mass Transit Programme in Nigeria, mostly in Kogi State Transport Company. It has been apparent that Mass Transit in Kogi State has not been done in the right procedure which has motivated this research. The objective of this research is not only to give insight into the factors that militate against mass transit but to bring about recommendations so as to eradicate the problems. The method used in collecting data was mainly secondary data and questions which were administered in the Kogi Mass Transport Company. These were analyzed by simple percentage method. It was discovered from the findings that insufficient spare parts affected the operation of the corporation. It was also clear that …
Is the topic “Isolation and Identification of Bacteria Associated with Suya Meat” recommended for Microbiology Project?
Yes it is highly recommended — Suya meat is produced by smoking the raw beet with the addition of some spices, salt, oil, groundnut cake and flavors, the meat is first sliced into smaller pieces and the spices are rubbed onto it, it is later oven dried or over local source of heart. This allows the meat to get dried properly with the right taste before is gold to the consumers. The study examines the Isolation and Identification of Bacteria Associated with Suya Meat. In achieving this aim, the following specific objectives were laid out to isolate, microbial species associated with suya meat, identify the microbial species associated with the suya meat, and isolate and identify the common spoilage organisms of suya meat often production thereby …
Can this topic “Online Voting (E-Voting) System for Federal College of Education Technical Omoku” be used for Computer Science Education Project?
Yes it can be utilized for research — E-voting refers to the option of using electronic means to vote in referendums and elections. E-Voting is an election system that allows a voter to record his or her secure and secret ballot electronically. The inefficiency of voting process in Nigeria has resulted in a lot of problems. These problems have continued to obstruct the peace of democracy in Nigeria because the choice of a capable candidate is not encouraged by the current system. The aim of the study is to examine the Design and Implementation of Electronic Voting System using Federal College of Education Technical Omoku as a case study. In achieving this aim, the following specific objectives were set out to design and develop a software platforms for …
Can the material for “Design and Implementation of a Computer Based System for Tertiary Institutions Verification” be used as a guide for Computer Science (CS) Project?
Yes it can be used — This work was produced out of the necessity to address the inherent problems that spring up during admission of students in the institution this effort is geared towards assisting the necessary bodies to verity students within a given time. It also addresses the issue of time wasting in admission/verification of students. It is also designed for easy associability to all and sundry. The software of this project when run, prompts the user to enter the name, his personal data,WAEC result, prelim result and then the department for which he or she is to be admitted. The computer will verify and inform you if the student in question is qualified to be admitted or not. Also, the software of this project contains storage facilities …