DESIGN AND CONSTRUCTION OF MICROCONTROLLER BASED DOMESTIC REMOTE CONTROL SYSTEM
ABSTRACT
The need for a remote control system that can control domestic appliances and various lighting points and sockets has often been a concern for uses at times uses find it inconvenient and time they are leaving the house for work it has also often led to damage of appliances due to the fact that an appliances was not timed off before leaving the house.
The objective of putting up. This project therefore is to design equipment that can facilitate a convenient and easy way of controlling our domestic appliances lighting points and sockets especially in powering by ourselves. This objective will be accomplished using various components which include a microcontroller project together with other component.
CHAPTER ONE
1.0 Introduction
1.1 Objective Of Project
The need for a remote control alert system that can control domestic appliances and various lighting points and sockets has often been a concern for users. At times users find it inconvenient and time consuming to go around turning their appliances on or off each time there is power outage or each time they are leaving the house for work. It has also often led to damage of appliances due to the fact that an appliance was not turned off before leaving the house.
The Objective of putting up this project, therefore, is to design an equipment that can facilitate a convenient and easy way of controlling our domestic appliances, lighting points and sockets especially in powering them, without always going to appliances physically by ourselves.
This objective will be accomplished using various components which include a Microcontroller (AT89C51) which acts as the backbone of the project together with other components.
1.2 Justification Of Project
The ease of putting our appliances, lighting points and sockets on or off has made it necessary to develop this system in order to control our appliances, lighting points and sockets from a central point using a remote control. The issues of always forgetting our appliances ON when leaving the house has often caused fire outbreak and explosion in homes and this is another reason that led to designing and construction of this project.
1.3 Scope Of Diagrams In Project
In this project report, the diagrams will range from simple block diagrams to complex circuit diagrams which will comprise mostly of common electrical and electronics symbols. Some of the diagrams that will feature in this report will be used as the main block on which certain parameters will be explained upon. Relevant electronic components will also be shown and described.
This project report will also contain an outline of the circuit diagram as it is seen physically. The package design diagram will be included showing the width, height in millimeter (mm).
1.4 Block Diagram Of Project
Fig 1.0: Block diagram (The diagram is in the complete material which you will get at the end of this artilcle)
1.5 Project Report Organization
Chapter 1 serves as the introductory chapter where I try to relay the concept and acceptable reasons why the project should be implemented for the intending user of the work. Thus, showing the block diagram of the design and a scope of diagram for the entire project design.
Chapter 2 deals with the literature review where it will be discussing the origin of this project design. In the origin of the project, we will be looking at what brings about the three phase selector in our day to day activity and how the idea of designing this project comes about.
A description of the Project is also given where the 2 sections of the project are discussed and the various components contained in the sections also mentioned.
The use and importance of this project design will also be mentioned here. It will be looking at the best place where this project design can be use and where it cannot. This chapter will also make room for adding additional information that will help in the actualization of this project design.
Chapter 3 treats the methodology of this project design. It comprises of the information gathering; the source of the materials used in designing and writing the project report, data analysis; the components and devices used in the course of designing this project will be analysis to know their basic means of operation and how they will help in putting up this design, system design approach; the possible way to tackled the project design from scratch, bottom-up; it will treat how the practical detail was gotten before considering about the general principle of the system design, choice of design system; it focuses on why the project design was done using a microcontroller rather than using only digital logic, and also the data flow arrangement and system flow chart.
In chapter 4, the detail design work will be presented. It will include the schematic of the design of the various sections of the design and the source code (in C language) used in programming the microcontroller.
Chapter 5 will be discussing the system testing, Expected results, and Performance evaluation.
Summary and conclusion of the design will be presented in Chapter 6. It will be looking at the problems encountered in designing the project and possible solutions to them. From the problems and solutions of this work, the suggestion for further improvement will be stated.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Construction of Microcontroller Based Domestic Remote Control System can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
Introduction
- 1.1 Objective Of Project
- 1.2 Justification Of Project
- 1.3 Scope Of Diagrams In Project
- 1.4 Block Diagram Of Project
- 1.5 Project Report Organization
Literature Review
- 2.1 Review Of Remote Control Systems
- 2.2 Description Of Project
- 2.3 Use Of Project
Methodology
- 3.1 Information Gathering
- 3.2 Hardware Components Analysis
- 3.2.1 Transformers
- 3.2.2 Bridge Rectifier
- 3.2.3 Diodes
- 3.2.4 Capacitors
- 3.2.5 Voltage Regulator
- 3.2.6 Light Emitting Diode
- 3.2.7 Resistors
- 3.2.8 Microcontroller
- 3.2.9 Crystal Oscillators
- 3.2.10 Transistor
- 3.2.11 Relays
- 3.2.12 Infra Red Transmitters And Recievers
- 3.3 System Design Approach
- 3.4 Choice Of Design
- 3.5 The Process Flow Chart
CHAPTER FOUR: Design
- 4.1 The Hardware Subsystems
- 4.1.0 Basic Power Supply Design
- 4.2 Microcontroller (At89C51)
- 4.3 The Input Interface Design
- 4.4 The Output Interface Design
- 4.5 Control Software Program Design
System Testing, Implementation And Evaluation
- 5.1 System Testing
- 5.1.0 Test Plan
- 5.1.1 Test Data
- 5.2 Choice Of Programing Language
- 5.3 Expected Test Results
- 5.4 Performance Evaluation
Summary And Conclusion
- 6.1 Summary
- 6.2 Problems Encounter
- 6.3 Conclusion
REFERENCES
APPENDIX A
APPENDIX B
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Construction of Microcontroller Based Domestic Remote Control System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
Introduction
- 1.1 Objective Of Project
- 1.2 Justification Of Project
- 1.3 Scope Of Diagrams In Project
- 1.4 Block Diagram Of Project
- 1.5 Project Report Organization
Literature Review
- 2.1 Review Of Remote Control Systems
- 2.2 Description Of Project
- 2.3 Use Of Project
Methodology
- 3.1 Information Gathering
- 3.2 Hardware Components Analysis
- 3.2.1 Transformers
- 3.2.2 Bridge Rectifier
- 3.2.3 Diodes
- 3.2.4 Capacitors
- 3.2.5 Voltage Regulator
- 3.2.6 Light Emitting Diode
- 3.2.7 Resistors
- 3.2.8 Microcontroller
- 3.2.9 Crystal Oscillators
- 3.2.10 Transistor
- 3.2.11 Relays
- 3.2.12 Infra Red Transmitters And Recievers
- 3.3 System Design Approach
- 3.4 Choice Of Design
- 3.5 The Process Flow Chart
CHAPTER FOUR: Design
- 4.1 The Hardware Subsystems
- 4.1.0 Basic Power Supply Design
- 4.2 Microcontroller (At89C51)
- 4.3 The Input Interface Design
- 4.4 The Output Interface Design
- 4.5 Control Software Program Design
System Testing, Implementation And Evaluation
- 5.1 System Testing
- 5.1.0 Test Plan
- 5.1.1 Test Data
- 5.2 Choice Of Programing Language
- 5.3 Expected Test Results
- 5.4 Performance Evaluation
Summary And Conclusion
- 6.1 Summary
- 6.2 Problems Encounter
- 6.3 Conclusion
REFERENCES
APPENDIX A
APPENDIX B
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Construction of Microcontroller Based Domestic Remote Control System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Is the topic “Human Resource Development and Productivity in the Civil Service” recommended for Political Science Project?
Yes it is highly recommended — The Civil Service as the machinery of Government performs the unique role of governance and National development as such government everywhere in the world have come to terms with the need to train and re-train it’s hum resource for them to be better equipped to maximize productivity levels and meet the challenges of governance and management. This work makes use of the system theory as theoretical framework and data gathered from secondary sources. My chapter one began with the general introduction where we have the background of study, statement of problem, objective of study, significance of study, literature review, significance of the study, theoretical framework, hypotheses, method of data collection and analysis, scope and limitation of study, operationalization of concept. In …
Can the material for “The Role of Foreign Election Observers in Democratic Elections in Nigeria” be used as a guide for Political Science Project?
Yes it can be used — This paper is about the role of foreign election observers in democratic elections in Nigeria: a case study of the 2015 presidential elections. The conduct of the 2015 Presidential election in Nigeria recorded mixed outcomes. Although fears that Election Day would be marred by serious violence were allayed to a large extent, some instances of technical hitches, vote buying and other forms of electoral manipulations were recorded in some parts. However, these electoral hitches were not sufficient to alter the expected outcome of the election. For the first time in Nigeria’s political history, an incumbent president lost power in a general election. Has Nigeria’s democracy consolidated satisfactorily? The burden of this paper is to examine the trajectories of the 2015 …
Is the topic “Design and Fabrication of a Dust Extractor” recommended for Mechanical Engineering Project?
Yes it is highly recommended — Man's imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways. The environmental degration is, in turn contributing to health threat in this part of the globe. Unfortunately most factories, workshops which suppose to posses these machines for dust extractions are not having them thereby making dust a very dangerous threat to man. Due to this ugly development it, is obvious that these factories and workshops can do little or nothing to protect our environment from this poor state. It is therefore necessary that all and sundry should join the crusade of eradicating dust from our environment thereby making it clean. …
Can this topic “The Role of Managers in Management of Small Scale Business Organizations” be used for Business Management Project?
Yes it can be utilized for research — The study was carried out to investigate the Role of Managers in Management of Small Scale Business Organizations using Zenith Bank Kafanchan Kaduna State as a case study. In achieving this aim, the following specific objectives were laid out to examine the impact of manager to the success of Small Scale Business organization, examine if manager can influence employees to achieve organizational goal and verify if goal setting could be achieved without the manager. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 80 (eighty) respondents were selected for this study to represent the entire population of the study. For null hypotheses were formulated …
Can the material for “Design and Implementation of Mobile Application for Electronic Voting for SUG” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Electronic voting refers to the option of using electronic means to vote in referendums and elections. E-Voting is an election system that allows a voter to record his or her secure and secret ballot electronically. The inefficiency of voting process in Federal Polytechnic Nekede has resulted in a lot of problems. These problems have continued to obstruct the peace of democracy in Student Union Government (SUG) in Federal Polytechnic Nekede because the choice of a capable candidate is not encouraged by the current system. The aim of the study is to Design and Implement a Mobile Application for Electronic Voting for Student Union Government (SUG) using Federal Polytechnic Nekede as a case study. In achieving this aim, the following specific …
Is the topic “A Study Into the Challenges and Prospects of Marketing Nigerian Made Computer Softwares” recommended for Computer Science Education Project?
Yes it is highly recommended — The study examines the challenges and prospects of marketing Nigerian made computer softwares. Posed with the problem of inferiority complex usually associated with Nigerian made goods, various foreign products have edge over indigenous products. Objectives for the study were to critically examine attitude of people towards Nigerian made computer softwares and various ways in which the marketability of Nigerian made softwares can be enhanced. Concerning methodology, fifty (50) computer science students and lecturers were used for the study. Findings from the study revealed that most students face challenges when convincing organizations to use their indigenously developed softwares. The government should create the enabling environment to enable Nigerian computer scientist to strive in the heat of competition from foreign softwares. Quality …
Can the material for “Design and Implementation of an Online Barcode Attendance System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Attendance is very important in every student. a single absent make a big difference in performance in the school. Most students of high school are prone to absence from classes claiming that the class is boring. Others due to laziness fail to attend classes, having preference of going to computer shops or playing games while some students cannot refuse the prospect of a friend asking them out during class period. Some of these actions are not reported to parents or guardians because the possible way of informing them is the traditional way which is by inviting the parents over through the students. With this, the authority would communicate the parents on the attendance level of the student. This process takes …
Can this topic “Effects of Poor Funding of Public Libraries in Nigeria” be used for Library and Information Science (LIS) Project?
Yes it can be utilized for research — Public library funding refers to the various ways individuals derive the expected funds for capital and recurrent expenses. The study was carried out to investigate the Effects of Poor Funding of Public Libraries in Nigeria using Imo State Library Board as a case study. In achieving this aim, the following specific objectives were laid out to find alternative source of funding public libraries and establish the state of funding public libraries in the study area. Investigation revealed that shortage of funds has resulted in shortage relevant text books as currently being experienced by students and researcher who are in need of the materials. Inadequate provision of funds has prevented the provision of current materials needs by the staff and clientele …
Is the topic “Financial Accounting Information as an Aid to Management Decision Making” recommended for Accounting and Finance Project?
Yes it is highly recommended — Financial accounting information aids in profit making, budgeting and cost control. The study was carried out to examine the Financial Accounting Information as an Aid to Management Decision Making. In achieving this aim, the following specific objectives were laid out to ascertain of there is any relationship between effective use of financial accounting information and the decisions made in an organization, ascertain whether company performance is related to efficient and effective use of financial accounting information and determine factors that may constrain or promote the effective use of financial accounting information. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 200 (two hundred) respondents …
Can the material for “Information Literacy” be used as a guide for Library and Information Science (LIS) Project?
Yes it can be used — The study explores the Information Literacy in Ekiti State University. In achieving this aim, the following specific objectives were laid out to examine the influence of literacy skills on student education in academic library, find out if there is a significant relationship between information literacy skills and use of information resources by university students, determine students’ levels of library literacy skills after the teaching of library literacy instruction, identify the challenges confronting user education programmes, and assess the extent to which library user education programme has changed the Ekiti State University Students’ attitude towards library use. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total …