DESIGN AND CONSTRUCTION OF AN INDUCTION COIL
ABSTRACT
The write-up details the Design and Construction of an Induction Coil which was capable of producing a high voltage in the secondary winding so as to produce a spark between the adjustable terminals of the secondary winding. The manual method of winding a coil was used to produce the primary and the secondary coil. All other necessary connections were made with respect to the circuit diagram. When a current is applied to the device, a high voltage was induced in the secondary coil through electromagnetic induction in the primary coil. As a result of this high voltage induced in the secondary coil, an electric spark was produced between the terminals of the secondary coil. This valuable device can be applied in the radio transmission station, hospitals, automobiles, labouratories, etc.
CHAPTER ONE
1.0 Introduction
A type of transformer that changes a low voltage direct current to a high voltage alternating current which produces an electric spark is known as INDUCTION COIL (Abbott, 1963).
1.1 Background of the Study
When Michael Faraday and Joseph Henry independently discovered the electric induction and its principles back in 1831, they started a chain of events that led to the generation of alternating current electricity without which modern technology could not function. They built upon a discovery made by Hans Christian Oersted in 1820. Oersted found out that electric current flowing through a wire created a magnetic field. This was the first discovery linking electricity and magnet, and it galvanized scientists into a frenzy of research.
Faraday and Henry coupled with other few scientists followed the path of research and discovered that moving a magnet through a closed coil of winding did indeed “induce” the flow of an electric current in the wire. Initially, electric induction was a scientific curiosity, the direct current battery which had been invented by Allesandro Volta in 1800, had captured the interest of most of the researchers. It was until later in the 19th century that induction coils became of interest and that was due to the work of several individuals, such as French physists called Armand Hippolyte, Lious Fizeau and A. Apps who improved coil performance.
The induction coil uses the principle of electromagnetism. It is a corollary of Faraday's law, together with Ampere's law and Ohm's law giving rise to the Lenz's law. The EMF induced in an electric circuit always act in such a direction that the current it drives around the circuit opposes the change in magnetic flux which produces the EMF.
The induction coil does not only create an electric field or magnetic field, it also transforms the direct current which is usually of low voltage to high voltage. The induction coils were being used to create electrical discharges in gases at low pressure leading to the discovery of x-rays and real medical breakthroughs. It is often used in automotive ignition systems. Its principle is such that when a direct current is passed through the primary coil, a magnetic field is created which cause an EMF of a very high voltage to be induced in the secondary coil. The high voltage causes a spark to be produced between the two terminals of the secondary winding.
Due to this spark produced across the gap between the two terminals of the secondary winding, the induction coil was also known as the SPARK COIL. The size of the induction coil is determined by the length of spark it could produce (Albert, 1998).
1.2 Significance of the Study
The study on the construction of an induction coil is significant in automobiles and linear engines. It is used in car ignition to produce a spark at the plug which is used to start car engines.
It is also seen in operation of some medical equipment. The induction coil produces a spark between the terminals of the secondary coil. This spark creates an electrical discharge in gases at low pressure which lead to the discovery of x-rays and in provision of real medical breakthrough (Breithaupt, (2000).
1.3 Aims of the Study
The principle aim of this project is to construct an induction coil, which is capable of inducing 2500volts on the secondary coil which would produce an electric spark at the adjustable gap between the two terminals of the secondary winding as a result of the very high voltage in it when a current is passed through the device.
1.4 Statement of the Research Problem
The beginning of every task is always difficult. The fear of embarking on the project construction was a great challenge and a mantle of discouragement.
The material and all other components that was used in the construction was not common because the device itself is not common. As a result of this, sourcing for the materials and components was difficult. We had to visit different markets to get them complete.
The project is a great work and requires money to carry out the construction. Money has been scare and scarcity has been one of its characteristics. The scarcity of fund to finance the project was a big and challenging problem to overcome.
The unavailability of important books and the non easy access to the internet services made the search of information and knowledge needed for the project construction to be delayed. The challenge of moving outside the usual environment in search of information coupled with the waste of time and stress was quiet an intricate assignment.
In the packaging of the construction, we found it a bit difficult to source-out for the best and most suitable material for the packaging of the Project work.
1.5 Limitations of Study
It is bulky because the winding was done manually. During the course of this study, many things militated against its completion, some of which are:
- Time Constraint: The time frame given to accomplish this project was very short due to school academic calendar and it was carried out under pressure which made the researcher not to implement some necessary features.
- Establishment Policies: Establishment policies posed a serious limitation as most staffs are not ready to release information needed for this project work. There were lots of information needed from the staffs of this institution to enhance the study which took them time to release or they did not release at all for security purposes, hence the scope was reduced.
1.6 Scope of Study
The study focuses on the design and construction of an induction coil.
1.7 Definition of Terms
Design: Design is a plan or drawing produced to show the look and function or workings of a building, garment, or other object before it is made.
Construction: Construction is a general term meaning the art and science to form objects, systems, or organizations, and comes from Latin constructio and Old French construction.
Induction: Induction is the process of introducing a new employee to the company culture and processes with the aim of bringing them up to speed as quickly as possible as well as making them feel socially comfortable and aware of their professional responsibilities.
Coil: Coil, in an electric circuit, one or more turns, usually roughly circular or cylindrical, of current-carrying wire designed to produce a magnetic field or to provide electrical resistance or inductance; in the latter case, a coil is also called a choke coil.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Construction of an Induction Coil can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Construction of an Induction Coil" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Financial Accounting Information as an Aid to Management Decision Making” be used as a guide for Accounting and Finance Project?
Yes it can be used — Financial accounting information aids in profit making, budgeting and cost control. The study was carried out to examine the Financial Accounting Information as an Aid to Management Decision Making. In achieving this aim, the following specific objectives were laid out to ascertain of there is any relationship between effective use of financial accounting information and the decisions made in an organization, ascertain whether company performance is related to efficient and effective use of financial accounting information and determine factors that may constrain or promote the effective use of financial accounting information. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 200 (two hundred) respondents …
Can the material for “Design and Implementation of a Computer Based Census Management System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Computer Based Census Management System includes the sets of methods that allow us to measure the dimensions and dynamics of populations. The aim of the study is to Design and Implement a Computer Based Census Management System. In achieving this aim, the following specific objectives were laid out to develop a computerized software that automatically stores and retrieves all information on human population, reliable system that could be used in collecting data/information on human population, and system that will support direct access to the specific and required information. The motivation came after the last census exercise conducted in Nigeria. Most people were counted while many missed the count, this is because the man power wasn’t enough for the exercise, and …
Can the material for “The Impact of Tax Administration on Enugu State Revenue Generation” be used as a guide for Architecture Project?
Yes it can be used — The level of revenue generated in the state has been in a declining form due to poor administration and collections of taxes and lack of proper return of accounts. These are the negative effects that affect government revenue generation which are targeted to meet her basic functions like provision of basic amenities for her citizenry in the state. The aim of this research study is to evaluate the effect of tax administration on revenue generation to the Enugu state government. The research design adopted in this study was survey research method. Primary and secondary sources of data were used in collecting information which was analyzed using simple percentages and hypothesis tested using chi ”square statistical method at 0.05 level of …
Can the material for “Design and Implementation of a Computerized Sales Record System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Computerized Sales Record System is the process of collecting, inputting, storing, classifying, summarizing and interpreting data. The aim of the application is to design an application that can be used in keeping records of sales and cash received or spent, also to promote efficient and quality services to customers. In achieving this aim, the following are the specific objectives of study to design and develop a system that will: create a database that will help store sales records, capture the sales and inventory activities, automate sales and inventory task/activities, ensure consistency of accounts and reduction of error due to damage and ensure safety of the documents/records, because the system will be passworded to reduce access. The researcher was motivated to …
Can the material for “Financial Management and Accountability in Local Government” be used as a guide for Accounting and Finance Project?
Yes it can be used — This project therefore, shows past and present development in the system of financing the Local Government. It exposes the problems and prospects of planning at the Local Government level. It also shows how there financial and fiscal relations affect the fiancé and performance of the Local Government. This study shows the major element in the financing of Local Government like the sources of internally generated revenue system of budgeting and planning cost and control as well as execution of policies. A case study of Ihete-Uboma Local Government is considered the method used in the study of the research design in secondary and primary data structure and it reduced to the accounting determent of the Local Government, which was collected from the accounting …
Can this topic “The Role of Nigerian Commercial Banks in National Economic Recovery” be used for Banking and Finance (BF) Project?
Yes it can be utilized for research — As a nation progresses through previous stage of economic growth and development, expectations regarding the role of banks in economic growth development and social mobilization assume greater and weightier dimension. This situation becomes more pronounced when nation is going through the trauma of economic recession, as Nigeria is currently experiencing. The economic recession has necessitated the examination of the role of commercial banks in revitalizing the economy through a more effective functioning and better attention to the bank − customer relationship. Most learned educationists have succinctly presented a manage of the expectations of government and the public on the role of banks on National economic recovery efforts they identifies the problem of the Nigeria commercial banks as. Absence of the will to adhere …
Is the topic “Influence of Radio Campaign on the Collection of Permanent Voter Card (PVC)” recommended for Political Science Project?
Yes it is highly recommended — Radio as a medium of communication influences how people experience their political life by its regular broadcast of news material in current affairs, politics and other areas. The study was carried out to examine the Influence of Radio Campaign on the Collection of Permanent Voter Card using Ilorin Metropolis as a case study. In achieving this aim, the following specific objectives were laid out to find out the extent to which radio political campaign influence voters during the Collection of Permanent Voter Card and examine the factors inhibiting radio campaign on the Collection of Permanent Voter Card (PVC) among voters in Ilorin Metropolis. Investigation revealed that in Nigeria, the political institutions in the past employed the use of traditional means …
Is the topic “Production Processes of Improving the Quality of “Pupuru”” recommended for Agricultural Engineering (AE) Project?
Yes it is highly recommended — Pupuru (a fermented cassava product) is one of the major staple foods amongst the Yoruba, Ilaje and Ijaw speaking people in the south-south and south-western region of Nigeria, which had its source from the Ikale tribe of Ondo state. The traditional method of processing cassava tubers into pupuru involve, cassava tuber harvesting, peeling, washing, soaking, dewatering, moulding and smoking. The pressed and mashed cassava tubers are then rolled or molded into a ball shape and dried by smoking: it was observed that the pupuru produced by this method is infested with unpleasant odour, drudgery, poor packaging and cannot be stored for a long period. Hence, this project investigates in detail an improved method that will eliminate the deficiencies associated with …
Can the material for “An Analytical Study of Expenditure Control Measures in Government Owned and Private Hospitals” be used as a guide for Economics Project?
Yes it can be used — This research work on A Comparative Study of Expenditure Controls method in Government and private Hospitals is aimed at studying and analysing the different methods of expenditure control that is being adopted by these hospitals, their practical application and their level of effectiveness. It is aimed at carrying out a comparative analysis of two hospitals. To achieve the aim of this research, secondary data through textbooks and journals were used to review some of the related literatures. Equally, questionnaires, interview and observation, which sought to find out facts needed for analysing, were used. The questionnaires were analyzed by simple percentages while hypothesis were tested using chi-square statistics. The findings of the analysis indicate among others that the method of expenditure …
Can the material for “Relationship Between Resource Planning and School Organizational Performance” be used as a guide for Education Project?
Yes it can be used — The study attempted to investigate the relationship between resource planning and school organizational performance in selected secondary schools in Mainland Local Government Area of Lagos State. The study equally reviewed some important and extensive literatures under sub-headings. The descriptive research survey design was applied in the assessment of respondents’ opinions towards the subject matter. In this study, five null hypotheses were formulated and tested with the application of the independent t-test and the Pearson Product Moment Correltional Coefficient Statistical tools at 0.05 significance level. Also, the simple percentage frequency counts was used to analyse the questionnaire response of the selected respondents together with the research questions. A total of 140 (one hundred and forty) teachers were selected for this study. At …