DESIGN AND CONSTRUCTION OF A DIGITAL DOOR CODE LOCK SYSTEM USING COMPUTER INTERFACE
ABSTRACT
This project topic titled digital door code lock system using computer interface is a door security system for a door having an electrical, digital and computer actuated lock.
This door lock is controlled by a code lock controller having a correct code memory. Code lock as a mechanical device for securing a door or object so that it cannot be opened except by a series of manipulations that can be carried not only by a person knowing the secret or code”.
This project also tells the characteristics of each component that is used in the construction and operation of this digital door lock system and then the recommendation and conclusion of the work.
CHAPTER ONE
1.0 Introduction
A digital door code lock system using computer interface makes use of “code lock as a digital, electrical and mechanical device. It is designed for low usage application such as staff only area, information technology (IT) rooms, office doors, toilets, bank doors and store cupboards.
The unit is fully reversible, simple to fit stays locked until correct code is entered, code easily changed, over 8000 codes to choose from suitable for entering use and doors up to 55mm thick.
It could be used for locking the door, the bike, the fence and so on. It is a simple and secure method of locking without having to resort to the use of keys.
The digital door is a practical and code locking solution, ideal for commercial or residential premises where only a few internal doors need securing. It removes the need for keys, taking away the hassle and cost of copying or replacing lost ones.
Doors fitted with a co-door are opened by typing in a code, minimizing the risk of unwanted visitors gaining access to a restricted area, without imprinting the daily activities of tenants or staff.
This digital door incorporates an electronic code cock, a mechanical locking device and a power unit in the same housing and alternations to the door frame.
The door slides itself when the correct code is entered (2,4,6,8) and closes when a switch is pressed OFF. It provides user with a secure, convenient and cost effective way of locking doors.
The target or major aim of the digitally controlled door is to increase reliability and confidence limits by offering access to certified persons belonging to the set having the knowledge of the codes or permitted by the computerized interface.
It is therefore worthy of consideration as it is consistent with recent global realities where recession and global melt down has increased crime rates and hence the more need for security consciousness.
Constituent Circuits
The digitally coded door can be organized into:
- The flip flop section.
- Mono stable section
- Manual close section
- Computer interface section.
Basic Observed Configuration
There exist certain variations which is a product of the different combinations and the relationship between one of these segments and the other. Some of the variations can be noted as follows:
- A combination which is opened by a single button push and automatically closed after a specified time lag with default buttons e.g. banks.
- A combination of single push button to open and a single push button to close.
- A combination of multiple push buttons to open and multiple push buttons to close.
- A combination of a multiple push button to open and a single push button to close.
All of the above variations can be programmed with a computer Interface which makes this particular project unique in nature.
1.1 Significance of the Study
The significance is inherent in the importance of security. After life is the major gift from the divine or supernatural men, the most primary obligation of man as his own role in appreciation of the gift of the divine, is security be it of life or extended to property.
Any effort therefore to ensure security is the compulsory role of man to appreciate the divine hence the relevance of this project: digitally coded door with computer interface.
This project targets to eliminate all or most of the problems associated with the use of manually operated doors and improves the confidence and convenience of the user. It equally targets to reduce all factors leading to insecurity of lives and properties. Thus the significance of this project is;
- To provide security in such a way that only authorized persons with the knowledge of the code can have entry access.
- To reduce labour as it eliminates the option of a member of the closed set waiting for another who might stand on the door and open close doors.
- It is more convenience to the user as unpermitted persons don't interrupt his movement.
- It does not require a high voltage to drive it and is as such easily handled due to its less harmful nature.
- This project incorporates a logic system that switches off the rotating motor and prevents it from wear and tear which arises when it runs permanently.
- The user has the liberty of taking his/her time to perform operations or use the access until the reverse button is pressed unlike the banks where after time lag the door shuts.
Disadvantages of This Project
- A visitor coming to the house must call before having access to the door.
- If used on a cupboard, where documents are kept, when the person with the code dies will lead to breaking the cupboard.
- When drunk and code forgotten, you can never have access to it.
- When there is power failure access to the door will be restricted.
1.2 Scope of Study
1. The scope of this project covers the construction of a digitally coded door with computer interface.
2. There is no emphasis on any display system hence no display system is involved in this project.
3. The voltage rating for each component did not exceed the stipulated values in order to avoid damaging the circuit.
4. The scope therefore covers the above mentioned points coupled with the understanding of the working principles of the various four (4) basic observed configurations.
5. It strives to understand the working principles of the industrial components and their characteristics combinational activities applied to the project.
1.3 Definition of Terms
The term digital coded door with computer interface could be simplified as the use of codes and computer to control the opening and closing processes of the door system of offices, homes, gates etc.
The operation of input codes is controlled by four (4) different flip flop integrated circuits that compares or evaluates the different four (4) input codes for opening the door system. The integrated circuit value is CD4013 which is used as bi stable multi vibrator.
The timing of the circuit is the period of motor rotation at a particular time is controlled by the mono stable section endorsed by the NE555 integrated circuits and determined by the equation T = 1+RC.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Design and Construction of a Digital Door Code Lock System Using Computer Interface can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
- 1.0 Introduction
- 1.1 Significance of the Study
- 1.2 Scope of Study
- 1.3 Definition of Terms
- 2.0 Literature Review
- 2.1 History
- 3.0 Methodology
- 3.1 Research Design
- 3.2 Principle of Operation
- 3.3 Components Used
- 3.4 Operation
- 4.1 Conclusion and Recommendation
- 4.2 Problems Encountered
- 4.3 Recommendation
- Summary
REFERENCES
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Construction of a Digital Door Code Lock System Using Computer Interface" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
- 1.0 Introduction
- 1.1 Significance of the Study
- 1.2 Scope of Study
- 1.3 Definition of Terms
- 2.0 Literature Review
- 2.1 History
- 3.0 Methodology
- 3.1 Research Design
- 3.2 Principle of Operation
- 3.3 Components Used
- 3.4 Operation
- 4.1 Conclusion and Recommendation
- 4.2 Problems Encountered
- 4.3 Recommendation
- Summary
REFERENCES
Disclaimer for Complete Material Utilization
The displayed research work titled "Design and Construction of a Digital Door Code Lock System Using Computer Interface" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Is the topic “Design and Implementation of Online Examination System for Staff Recruitment” recommended for Computer Science (CS) Project?
Yes it is highly recommended — An online examination system for recruitment of staff is a web application that establishes a network between the organization and applicants. The aim of the study is to Design and Implement an Online Examination System for Staff Recruitment. In achieving this aim, the following specific objectives were laid out as follows to design and develop an application software that will properly document an individual’s job profile in the organization or firm and create a quick search and advance search that the user will use during the recruitment examination process. The motivation that led to the implementation of the proposed system is that that many organizations do not have competitive personnel and this negatively affects the productivity and image of the …
Can the material for “The Problem of Teaching and Learning of Agricultural Science in Tertiary Institutions” be used as a guide for Agricultural Economics and Extension Project?
Yes it can be used — The study scrutinized the Problem of Teaching and Learning of Agricultural Science in Tertiary Institutions using Sabon Gari Local Government as a case study. In achieving this aim, the following specific objectives were laid out to determine the effect of agricultural practices in the society on the study of Agriculture Science and assess the factors affecting the teaching and learning of agriculture in Senior High Schools in Sabon Gari Local Government. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 150 (one hundred and fifty) respondents were selected for this study to represent the entire population of the study. For null hypotheses were formulated …
Can the material for “The Effect of Urban Growth and Housing Problem in Nigeria” be used as a guide for Estate Management (EM) Project?
Yes it can be used — Urban growth is the expansion of a metropolitan or suburban area into the surrounding environment. The study was carried out to investigate the Effect of Urban Growth and Housing Problem in Nigeria using Ajah district under Eti-Osa Local Government Area of Lagos State as a case study. Investigation revealed that the urbanization is increasing rapidly in most African countries, and the major factors for the rapid increase relate to large scale migration from rural areas to the urban areas for better economic opportunities. Other factors are natural increase of the population, and uneven concentration of investments by governments and private organizations in the cities compared to rural areas. The research design used in this report is descriptive design, utilizing questionnaire …
Can the material for “Training and Development of Human Resources; A Critical Factor in Banking Operations” be used as a guide for Human Resource Management (HRM) Project?
Yes it can be used — This research work is aimed at finding the effect of training development in banking operations. The purpose is to determine the relationships between the level of productivity and human resources, training and development; discover the causes of high labour turnover in banks, especially commerce banks. Also to determine the whether the availability of training and development opportunities motivate staff of banks, to enable them stick firmly to the service of the banks. In conducting the research, the researcher used oral interview, questionnaires and personal observations to collect the necessary data required. A sample size of 53 (Fifty-three) of First Bank Plc, were studied. The data collected were statistically analyzed by the use of percentage. On the application, it was discovered that training and development …
Is the topic “Students’ Perception on Cultism At Federal College of Education” recommended for Education Project?
Yes it is highly recommended — The purpose of this study is to take a deep look into the student’s perception on cultism at Federal College of Education, Osiele, Abeokuta. Thereby, taking a deep look at the meaning of cultism, the perception of student’s of cultism, reason of cultism and origin or cultism etc. this comprises introduction to the research work, statement of the problem, purpose of study, significance of the study, the limitation of the study, definition of terms and background of the writers significance of study. This research work is of the literature reviews and the basic concept of terms, and most of the work done earlier by different scholars on the meaning of cultism and reason for cultism and perceptions of students on cultism. …
Can the material for “Design and Implementation of Student Course Evaluation System for Evaluating Teaching and Learning” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Online Student Course Evaluation System is a web based application that provide platform for the colleague to conduct student’s evaluation online. The aim of the study is to design and implement a Online Student Course Evaluation System for Evaluating Teaching and Learning. In achieving this aim, the following specific objective were laid out implement an effective method for evaluating lectures and create an online forum where students and lectures can interact and discuss. The motivation that led to the implementation of the proposed system is as a result of the inaccurate manual computation of Grade point average, inadequate of provision more ways for lectures to put ways for lectures to put their lecture materials online and a lot of time …
Can the material for “Effect of Laboratory Method of Teaching Mathematics on the Achievement of JSS II Students” be used as a guide for Mathematics Education Project?
Yes it can be used — The study focused on the effect of the laboratory method of teaching on the achievement of J.SS II students in mathematics in Lagos state. A total of 90 JSS 2 mathematics students were involved in the study. The research design used in the study was experimental/ control group research design. The research instrument used for the study were the mathematic Achievement Test (MAT) which was developed by the researcher and the instructional packages which are the lesson plans for both the experimental group and the control group. Two hypotheses were postulated and tested at 0.05 level of significance. The results were analyzed using mean, standard deviation, t-test and analysis of variance (ANOVA). From the findings, it was revealed that the use …
Can this topic “Principles of the Application of Makeup and Designing in Nollywood Production” be used for English Language Project?
Yes it can be utilized for research — This study was carried out on principles of designing and the application of makeup in Nollywood production. The place and use of make-up and costumes in play productions go a long way to identify and establish the environment, personalities of the characters and interpret with meaning the ideology of the playwright and the directorial concept without the use of dialogue. Oftentimes, these visual elements are employed unconsciously bearing in mind that they connote the same meaning as in real life and to the people at all times.These visual elements are expected to reflect the cultural and traditional norms of the locale of the play. They are used to complement the spoken words and reinforce the mental, social and psychological status …
Can the material for “Relevance of Blood Culture to the Diagnosis and Treatment of Septicaemia” be used as a guide for Microbiology Project?
Yes it can be used — Septicemia refers to the presence of bacteria in the blood and is often associated with severe infections, the alternative names. It is a common cause of morbidity and mortality among children in the developing world. The study was carried out to determine the Relevance of Blood Culture to the Diagnosis and Treatment of Septicaemia. In achieving this aim, the following specific objectives were laid out to determine the relevance of blood culture to the diagnosis and treatment of septicaemia and compare the occurrence of Gram positive and Gram-negative bacteria in the subjects with culture – proven septicaemia. Blood culture remains the best approach to identify the incriminated microorganisms when a bloodstream infection (BSI) is suspected, and to guarantee that the antimicrobial …
Can the material for “The Role of Leadership Styles in Driving Military Innovation” be used as a guide for Political Science Project?
Yes it can be used — The Army Military is an institution, since its purpose, objectives, organization, actions, behavior and the roles of its members; the allocated resources are specifically determined and regulated by normative prescriptions. The study scrutinized the Role of Leadership Styles in Driving Military Innovation. In achieving this aim, the following specific objectives were laid out to examine the relationship between the leadership styles of Military officers functioning in Driving Military Innovation and examine the leadership styles required to optimize an organizational climate of military innovation. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 80 (eighty) respondents were selected for this study to represent the entire …