CREDIT MANAGEMENT AND LIQUIDITY OF MANUFACTURING COMPANY
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Credit Management and Liquidity of Manufacturing Company can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Credit Management and Liquidity of Manufacturing Company" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Credit Management and Liquidity of Manufacturing Company" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Impact of Job Satisfaction on Worker Performance in Public Service” be used as a guide for Accountancy / Accounting Project?
Yes it can be used — This project/research work deals with Impact of Job satisfaction on Workers Performance In Public Service in Nigeria. A case Study of Ministry of Education, Enugu. We have probably all wondered at some time about the problems and poor performance among workers in public service in the County, Nigeria. Some times there is continuous striking of workers to pass across their feeling to the government which has never brought solutions to such problems. Specifically, the research intends to point out the important asset to any establishment – which is the people working for it. To ensure that the workers are productive, there is need for job satisfaction into the works. If an employee is satisfy with his or her job, this may …
Can the material for “Knowledge and Practice of Cervical Cancer Screening Among Women of Childbearing Age” be used as a guide for Midwifery Project?
Yes it can be used — Cervical screening is the process of detecting and removing abnormal tissue or cells in the cervix before cervical cancer develops. The aim of the study is to examine the Knowledge and Practice of Cervical Cancer Screening among Women of Childbearing Age. In achieving this aim, the following specific objectives were laid out as follows to: determine the knowledge and acceptability of Cervical Cancer Screening, assess the knowledge, attitude and practice towards cervical cancer and screening among Women of Child Bearing Age, carry out health education on cervical cancer and screening, which is the intervention group, and assess the effect of health education on knowledge, attitude and uptake of cervical cancer screening among women of reproductive age in Adeniran Ogunsanya College …
Can the material for “An Empirical Determination of Labour Output for Painting in the Nigerian Construction Industry” be used as a guide for Quantity Surveying (QS) Project?
Yes it can be used — Research has shown that construction labour output is crucial to the success of construction projects. However, existing labour output used for the preparation of construction estimates in Nigeria are outputs derived from untested experiences. The focus of this study is to use the work study approach to empirically establish labour output for painting activities for the Nigeria construction industry using the classification in the BESMM3 as a guide. The procedure adopted field survey involving work measurement to observe and measure operatives output. Data were collected from on-going construction works and analysed using descriptive and regression analysis. The analysis carried out established general average output value per day as follows; painting of general surfaces of walls, girth greater than 300mm with (textured …
Can the material for “The Impact of High Cost of Living on Provision of Qualitative Education to Secondary School Students” be used as a guide for Education Project?
Yes it can be used — The research attempt to examine the Impact of High Cost of Living on Provision of Qualitative Education to Secondary School Students in Oshodi/Isolo Local Government Area of Lagos State. Survey research design was adopted, data was gathered with the use of a well structured questionnaire. Two hundred and ten (210) questionnaires were administered to parents of five secondary schools in Oshodi/Isolo Local government area. Data gathered were presented on table using simple percentage. Three hypotheses were formulated and tested. The result of the analysis revealed that High cost of living significantly influence the provision of qualitative education to the children, High cost of living significant effect on the standard of living and finally Provision of educational materials affects the education of children. Conclusions …
Is the topic “The Study of Motivation and Employee Productivity in Public Sector” recommended for Public Administration (PA) Project?
Yes it is highly recommended — The research work is concerned with the study of Motivation Employee Productivity in Public Sector, using the Ministry of Education as a case study. The main objective examines the effect of motivation on employees’ productivity in the Ministry of Education. Data were collected through structured questionnaire. Survey method was used to analyze the effect of motivation on employees’ productivity in the Ministry of Education and random sampling technique was used to stratify the sample population. Also, hypotheses were tested using simple mean statistics. It was found out that adequate staff motivation will enhance employees performance, that the higher the motivation the lesser the friction between boss and subordinate, that appreciation is a form of motivation for staff in the Ministry. That frequent …
Is the topic “An Investigation on the Usage of Computer Based Test on the Performance of Secondary Schools Students in Nigeria” recommended for Education Project?
Yes it is highly recommended — Computer Based Test (CBT) is a test with an implementation system using a computer as a medium for conducting tests. The study was carried out to investigate the Usage of Computer Based Test on the Performance of Secondary Schools Students in Nigeria. In achieving this aim, the following specific objectives were laid out to find out the effect of CBT on the performance of secondary schools students and discover if any measure is stop or put an end to the problems OF CBT in Nigeria. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 100 (one hundred) respondents were selected for this study to …
Is the topic “Impact of Manpower Training on Service Performance” recommended for Industrial Relations and Personnel Management (IRPM) Project?
Yes it is highly recommended — This study examines the importance of manpower training on service performance in Nigeria Nigeria Limited. To access the situation well structured questionnaire were administered using simple random techniques. The data collected were analyzed using simple tables percentage and Chi-square Statistical Technique method. The result indicates that Training of workforce has a significant effect on productivity. It was also discovered that On-the-job training is preferable to the off-the-job training with the organization. …
Can this topic “Design and Implementation of an Automated System for Inventory Control in a Manufacturing Company” be used for Computer Science (CS) Project?
Yes it can be utilized for research — This research work is concise and generally summarizes the activities duly carried out in the design and implementation of an automated inventory control system for a manufacturing organization. The system is designed to efficiently handle the movement and tracking of goods through the replacement of human workers by technology. The manual method or intervention is labour intensive, costly, and error prone and cannot ensure the inventory remains up-to-date due to oversight and internal shrinkage. With the proposed new system, inventory can be updated in real time without product movement, scanning, or human involvement. The automated system allows inventory status to be determined and shipping and receiving documents to be generated automatically triggering automatic orders for products that are low in inventory. …
Can the material for “Design and implementation of an expert system for medical diagnosis system” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Expert system play an indomitable role in various disciplines and the assistance it renders to man cannot be overemphasized. A computer is digital electronic machine capable of accepting input data, processing and producing an output (information). The computer is an important tool that plays a good role in the analysis of any subject that is to be programmed. The uses of expert system on medical diagnosis of malaria include the interest of the research because of some spectacular activities it accomplished and to bring the awareness of the software to the doorstep of the readers and other medical and paramedical personnel’s. The software helps the junior doctors accompanied by a nurse in answering the calls of some patients with tedious …
Can this topic “The Influence of Family Background Variables on the Academic Performance of Students” be used for Education Project?
Yes it can be utilized for research — This study centres on the influence of family background variables on the academic performance of students in Nigeria with particular reference to Egebda Local Government Area of Oyo State. The rationale is to re-orientate the citizen Egbeda on the influence of family background variables on child’s life and his academic performance with the use of stratified and balloting random sampling techniques, students were taken from four (4) senior secondary schools in Egbeda Local Government, Ibadan. Eighty (80) questionnaires were self-administered and cumulative records of the respondents available of students were check and matched. A research question was asked and answered which was used to classify students into various socio-economic status. Five hypotheses were also formulated and tested. The major statistical techniques used …