Project Topics | Seminar Topics | Related Topics
Cost Optimization Analysis for Port Operations

COST OPTIMIZATION ANALYSIS FOR PORT OPERATIONS


CHAPTER ONE


Introduction


Background of the study

In many markets, firms compete over time by expending resources with the purpose of reducing their costs. Sometimes, the cost reducing investments operate directly on costs. In many instances, they take the form of developing new products that deliver what customers need more cheaply. Therefore, product development can have the same ultimate effect as direct cost reduction. In fact if one thinks of the product as the services rendered to customers, then product development often is just cost reduction. The globalization of trade and subsequent breakdown in trade barriers has generated tremendous growth in maritime transportation. Thus the stiff competitions among part operators have increased the desire to attract port uses.

Therefore, port operators will have to optimize the cost of their operations if they must benchmark good productivity and performance for their terminals. There is no doubt that the maritime sector especially the port system is vital and instrumental to the national economic survival of the country. Nigeria is a popular nation, renowned for her international nature of business. Quality customer service is the benchmark principle for the maritime professional and customer care techniques. Therefore, the economic justification of a port is its ability to satisfy its customers at a lower price and also be able to make profits. With regards to costs emanating from the vessel, it can be affirmed that port costs, above all are the most significant, since they depend on the gross tonnage of the vessel and the time it spends in the port. Bulk carriers are those which tend to spend most time in port as well as being the greatest in size. The costs of towing, which depend on the circumstances of the movement, tend to represent approximately 10% to 15% of the cost scale of the vessel [5].

More so, other costs due to the vessels stay at port, including agency fees average approximately 5 or 10% of the total. The port tariffs on the merchandise are situated at less than 50% of the total. Where all costs of unloading are considered in relation to port costs, the former are situated at about 70% of the total where all costs are also included storage, weighing etc. With a clear tendency to drop when using cranes of greater efficiency and capacity, about 30% would correspond to port costs. It is evident that Nigerian ports operate at very low optimal capacity, in spite of the expected large volume of cargo traffic that passes through it. It is very pertinent to note that vessel delay period is a very serious problem that contributes to over 60% of our ports low productivity problem in recent times. Ndikom [3], further confirms that regrettably, at Lome port, dock workers load 700mts per day as against less than 250mt per day at Nigerian ports.

The five days difference in loading arrangements between Nigerian ports and other ports in terms of ship delay rate billings of US$4,000 is rather too staggering and unfortunate. In clear terms, this is enough to deny Nigerian ports cargo and revenue that would ordinarily have come our way. Kaspi, et al, looked at the minimization of cost and optimum port performance as anchored on reducing port turnaround time. They developed a regression model to relate turnaround time and port cost which was highly related with allocation of port facilities. Beatriz et al, argues that the optimal organization of the industry can be studied by means of cost and production functions. They reviewed the literature on econometric ports’ structure and propose that the calculation of key cost indicators (economics of scale, scope and so forth) is best in determining optimal port structure is order to minimize the cost of port operations.


1.2 Statement of the problem

It is evident that Nigerian ports operate at very low optimal capacity, in spite of the expected large volume of cargo traffic that passes through it. It is very pertinent to note that vessel delay period is a very serious problem that contributes to over 60% of our ports low productivity problem in recent times. Ndikom [3], further confirms that regrettably, at Lome port, dock workers load 700mts per day as against less than 250mt per day at Nigerian ports. The five days difference in loading arrangements between Nigerian ports and other ports in terms of ship delay rate billings of US$4,000 is rather too staggering and unfortunate. In clear terms, this is enough to deny Nigerian ports cargo and revenue that would ordinarily have come our way.

Kaspi, et al, [2], looked at the minimization of cost and optimum port performance as anchored on reducing port turnaround time. They developed a regression model to relate turnaround time and port cost which was highly related with allocation of port facilities. Beatriz et al [1], argues that the optimal organization of the industry can be studied by means of cost and production functions. They reviewed the literature on econometric ports’ structure and propose that the calculation of key cost indicators (economics of scale, scope and so forth) is best in determining optimal port structure is order to minimize the cost of port operations.


1.3 Significance of the study

This study attempts to optimize the cost of port operations in Nigeria. With regards to costs emanating from the vessel, it can be affirmed that port costs, above all are the most significant, since they depend on the gross tonnage of the vessel and the time it spends in the port. Bulk carriers are those which tend to spend most time in port as well as being the greatest in size. In the light of the above, this study attempted bridging the gap by offering an optimal cost to port operations in Nigeria.


1.4 Objectives of the study

The broad objective of the study is the analysis of optimum cost of port operations. The specific objectives include:

  1. Determination of the minimum cost of port operations.
  2. Determination of the optimality range of cost variability.
  3. Determination of the optimality range of resource variability.

1.5 Research questions

  1. Is there a minimum cost of port operations?
  2. What is the optimality range of cost variability?
  3. What is the optimality range of resource variability?

1.6 Research hypotheses

  1. Ho: There is no minimum cost of port operations.
    H1: There is minimum cost of port operations.
  2. Ho: There is no optimality range of cost variability.
    H1: There is optimality range of cost variability.
  3. Ho: There is no optimality range of resource variability.
    H1: There is optimality range of resource variability.

1.7 Limitations of the Study

Financial constraint- Insufficient fund tends to impede the efficiency of the researcher in sourcing for the relevant materials, literature or information and in the process of data collection (internet, questionnaire and interview).

Time constraint- The researcher will simultaneously engage in this study with other academic work. This consequently will cut down on the time devoted for the research work.


1.8 Scope of the study

The study focuses on the analysis of cost optimization of port operations using Apapa port as a case study.


1.9 Definition of terms

Cost:

This is an amount that has to be paid or spent to buy or obtain something.

Cost optimization:

This means finding an alternative with the most cost effective or highest achievable performance under the given constraints, by maximizing desired factors and minimizing undesired ones.

Port:

This refers to a town or city with a harbor or access to navigable water where ships load or unload.


CHAPTER TWO

2.0 Literature Review

2.1 Introduction

The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …


Procedure for Downloading the PDF (Docx) Material


Cost Optimization Analysis for Port Operations can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.


Seminar Material Cost
₦3,000
Project Material Cost
₦5,000


Request Complete Material

Complete Material Chapters of Cost Optimization Analysis for Port OperationsClick here to request the Complete Material via WhatsApp including;
  • Preliminary Pages,
  • Chapter 1-5,
  • References and Appendix.



Disclaimer for Complete Material Utilization

The displayed research work titled "Cost Optimization Analysis for Port Operations" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.


Frequently Asked Questions (FAQ)


Can the material for “Influence of Parental Socio Economic Status on School Involvement and Academic Performance in Secondary School Student” be used as a guide for Education Project?

Yes it can be used — Parental socio-economic status largely determines where a family reside, quality and quantity foods they eat, quality school the child attends among others. It is not clear the extent it influences on parental involvement and academic achievement of students. However, the study was therefore designed to examine the influence of parental socioeconomic status in school involvement and academic achievement of secondary school students in Kosofe Local Government Area of Lagos State. The study adopted the descriptive survey design. A researcher designed questionnaire was used to collect data from respondents of 120 (SS2 students) randomly selected from four (4) Senior Secondary school. The data were analyzed using one-way ANOVA. The results of the analysis revealed that socio-economic status of parents (particularly educational …


Can this topic “Information Literacy” be used for Library and Information Science (LIS) Project?

Yes it can be utilized for research — The study explores the Information Literacy in Ekiti State University. In achieving this aim, the following specific objectives were laid out to examine the influence of literacy skills on student education in academic library, find out if there is a significant relationship between information literacy skills and use of information resources by university students, determine students’ levels of library literacy skills after the teaching of library literacy instruction, identify the challenges confronting user education programmes, and assess the extent to which library user education programme has changed the Ekiti State University Students’ attitude towards library use. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total …


Can the material for “Availability of Teachers and Laboratory Facilities for Effective Teaching and Learning of Social Studies” be used as a guide for Social Studies Education Project?

Yes it can be used — The study was conducted to investigate the Availability of Teachers and Laboratory Facilities for Effective Teaching and Learning of Social Studies in Junior Secondary School in Enugu North using Enugu North Local Government Area as a case study. In achieving this aim, the following specific objectives were laid out to identify the availability of laboratory facilities in Junior Secondary Schools as well as the impact these facilities have on the effective teaching and learning of social studies and critically analyze some factors that affect individual performance of students in the selected schools. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. Primary data were collected from the …


Can the material for “Assessment of Commercial Banks Lending Policies to the Private Sector” be used as a guide for Banking and Finance (BF) Project?

Yes it can be used — In this study, researcher examined the empirical analysis of commercial banks lending policies to the private sector. A case study of union bank of Nigeria plc. The study is significance on the system of monetary and credit policy measure which the central bank has stipulated the amount of interest lending rates that are obtainable in the commercial banks. The empirical analysis which is based on experiments or experience which is intended not only to maintain adequate monetary policy measures but also to create a healthy balance of payment position which is to reduce the art of domestic price inflation. In this study empirical analysis give way to some of the problems which arise in this study entitled empirical analysis commercial …


Can the material for “Philosophical Evaluation of Charles De Montesquieu’s Theory of Separation of Powers vis-à-vis the Practice of Delegation of Authority” be used as a guide for Philosophy Project?

Yes it can be used — The theory of separation of powers, according to Charles De Montesquieu, is founded on the desire for political liberty for the citizens in a state. For this reason he advocates that the three powers of the organs of government-the Legislature, the Executive and the Judiciary should be manned by different persons and their functions properly co-coordinated such that liberty is achieved without any of the powers subsumed in the other. They must maintain their autonomy to achieve their purpose. But the exercise of delegated authority seems to forestall the total implementation of Montesquieu’s theory of separation of powers in modern government operations. The act of law-making, which is the sole function of the legislature, is also exercised by the executive organ …


Can the material for “Design and Implementation of Digital Marketing as an Effective Tool in Achieving Business Expansion in Covid-19 Era” be used as a guide for Computer Science (CS) Project?

Yes it can be used — Digital Marketing System is a computerized system that is designed to provide an organized flow of information to enable and support the marketing activities of an organization. The main aim of this study is to develop and implement an Digital Marketing System that will be useful to business owners. In achieving this aim, the following specific objectives were laid out to create a platform for businesses to reach a wider audience and increase sales and profits, develop a general purpose store where consumers can find products and services from the comfort of home through the Internet, and implement an online virtual store on the Internet where customers can browse the catalog and select products of interest. One of the major …


Can the material for “The Evaluation of Microorganisms on Garri At Ogbete Market” be used as a guide for Science Laboratory Technology (SLT) Project?

Yes it can be used — In the work, samples of Garri obtained from Ogbete market were evaluated for microbial contamination. Four sample of Garri from different sources of supple were collected from Ogbete main market Enugu Okwo, Nkalagu, Emene, and Abakaliki respectively. The sample were extracted using equal volume of sterile distilled water and serially diluted appropriately and the cultured for the growth of microben. The growth were further suspected to biochemical tests, characterization for confirmatory diagnosis organism isolated include staphylococcus aureus, clostridium perferingens, Clostridium botulism and vibroi parahamolyticus. The evaluation show that Abakaliki Garri have more microbial spores than others. This can be because of handler or jute bag or moisture which help in the increase of the microbial load. This was involve the microbial …


Can the material for “The Effect of Working Environment on the Performance of Secretary in the Organization” be used as a guide for Office Technology and Management (OTM) Project?

Yes it can be used — Working environment is an important component of work life for employees as employees spend significant part of their time at work, and it affects them in one way or the other. The aim of the study is to scrutinize the Effect of Working Environment on the Performance of Secretary in the Organization. In achieving this aim, the following specific objectives were laid out as follows to find out the effect of working environment on the job performance of the secretaries, effect of inadequate office furniture and fittings, modern machine on the job performance of secretaries, effect of good lighting, ventilation on the job performance of secretaries and impact of salary structure on the job performance of secretaries. The research design …


Is the topic “The Relevance of Population Census to Economic Development of Rural Areas in Nigeria” recommended for Public Administration (PA) Project?

Yes it is highly recommended — The project is on the relevance of population census to economic development of rural areas in nigeria (a case study of orumba north local government of anambra state) the zone comprises of 16 rural communities namely; Ajalli, Ufuma, Ndike, Ndiowu, Omogho, Oko, Amaokpala, Awa, Amaetiti, Awgbu, Ndiukwuenu, Ndiokolo, Okpeze, Ndiokpalaeze, Nanka and Ndiokpalaeke these formed the area of the study: In this research work, a sample population was selected and administered with questionnaire and their responses were analysed using percentage method, after the analysis, the researcher find out that adequate population census data is thus a sine qua non for economic development of rural areas and also adequate population census data will help in effective planning of these rural area in …


Can the material for “Quality of Care Rendered in Primary Health Care Facilities towards Antenatal Mother” be used as a guide for Midwifery Project?

Yes it can be used — The study assesses the Quality of Care Rendered in Primary Health Care Facilities and the perception of patients at the antenatal clinic to know if it is accepted or not and the factors that influences their attitudes towards cesarean section. This aim of the study is to determine the Quality of Care Rendered in Primary Health Care Facilities and the Perspective of Antenatal Mother using Enugu State Primary Health Care as a case study. In achieving this aim, the following objectives were laid out to assess the perception of Antenatal Mother in Enugu State Primary Health Care Service, determine the attitude of health care worker towards Antenatal Mother, assess the possible factors that influence their perception and attitude of Antenatal …



Chat with us on WhatsApp