CONSTRUCTION OF HEAT EXCHANGER FABRICATION OF A TUBE AND SHELL HEAT EXCHANGER SYSTEM
ABSTRACT
There are two methods of constructing heat exchangers: Plate type. Parallel flow-the hot fluid and the coolant flow in the same direction.
Counter flow:- The hot fluid and the coolant flow in opposite direction. Cross flow: The hot fluid and the coolant flow at 90 angles (perpendicular) to each other.
The four heat exchanger parts identified were. Tube sheet shell Baffles single- pass heat exchangers have fluids that pass each other only once.
Multipass that exchangers have fluids that pass each other more than once through the use of a tubes and baffles.
Regenerative heat exchangers use the same fluid for heating and cooling. Non-regenerative heat exchangers use separate fluids for heating and cooling process.
CHAPTER ONE
1.0 Introduction
Heat exchanger is a device whose primary purpose is the transfer of energy between fluids. (J.R. Welty and R.E Witson Fundamentals of momentary heat and mass transfer 2nd edition 1975).
There are many types of heat exchangers, namely shell-and-tube exchanger, tubular and plate exchangers, the spiral plate heat exchanger etc.
In industrial processes, heat energy is transferred by a variety of methods which includes conduction as in electric resistance, waters, conduction as in exchangers, boilers and condensers, radiation as in furnace, radiant heat dryers and by special method such as electric heating.
The heat exchanger is a very important unit or system in small scale industries and also in process industries that their design has been highly developed. Designers of heat exchanger must be constantly aware of the difference between the idealized condition for and the real conditions of the mechanical expressions of their design and its environment. The result must satisfy process operational requirements (such as availability flexibility and maintainability) and do so economically. The most common material for heat exchanger is carbon steel.
Using the simple shell and tube heat exchanger in explain the process. Hot liquid flows through the tube and cold and more viscous liquid flows through the shell. The two liquids are collected and cooled by the forced convective air which is supplied by the fan. The shell side and tube side heat transfer coefficient are of comparable important and both must be large if a satisfactory overall coefficient is to be attained. The velocity and turbulence of the shell side liquids are as important as those of the tube side flow.
The purpose of this project is to constraint an efficient heat exchangers system which on reasonable basic will help in carrying out heat transfer operation in our laborating and in small scale industries. Cost of materials and labour is well as time were considered.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Construction of Heat Exchanger Fabrication of a Tube and Shell Heat Exchanger System can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "Construction of Heat Exchanger Fabrication of a Tube and Shell Heat Exchanger System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “The Impact of Awareness on Career Opportunities in Library and Information Science Profession” be used as a guide for Library and Information Science (LIS) Project?
Yes it can be used — Library and Information Science Profession is seen as a career that is dedicated to serving the public, providing timely and accurate information, thus contributing to the development of the society. The aim of the study is to explore the Impact of Awareness on Career Opportunities in Library and Information Science Profession in Delta State University. In achieving this aim, the following specific objectives were laid out to investigate the career choice of library and information science students in Delta State University, identify the factors influencing the choice of career, assess the factors affecting the choice of career investigate the challenges in the practices, and identify the factors that influence the choice of library and information science as a career. The …
Can the material for “Assessment of Human Resource Development in Small Scale Business Enterprise” be used as a guide for Human Resource Management (HRM) Project?
Yes it can be used — Human resource development is concerned with the provision of learning, development and training opportunities in order to improve individual, team and organizational efficiency. The study was carried out to assess the Human Resource Development in Small Scale Business Enterprise using Ikeduru Local Government Area as a case study. Investigation revealed that Human Resources Development approach has not taken a planned route in most instances. Training and educational contents are not systematically and regularly tested for relevance to the changing requirements of the small scale business enterprise. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 200 (two hundred) respondents were selected for this study …
Can the material for “Impact of Financial Institution to the Growth of Small Scale Business” be used as a guide for Accountancy / Accounting Project?
Yes it can be used — The study was carried out to examine the impact of financial institution to the growth of small scale business. In achieving this aim, the following specific objectives were laid out to ascertain if the financing options available to the Small Scale Business are practically obtainable to support the capital required for their operation and examine the extent to which Small Scale enterprise contributes to economic development. Financial institutions have some problems they are confronted with too. These problems include borrowers not paying back at stated time, government policies and regulations. These problems affect the smooth running of financial institutions because ties up capital that would have been used for further development of the sector. The research design used in this …
Is the topic “Design and Fabrication of a Laboratory Centrifuge” recommended for Mechanical Engineering Project?
Yes it is highly recommended — A Laboratory Centrifuge is a piece of equipment generally driven by an electric motor and some older ones usually spun with hand, that puts an object in a rotation around a fixed axis, applying a force perpendicular to the axis. The study was conducted to design and fabricate a Laboratory Centrifuge using local materials. It spun liquid samples at a high speeds and thus creates a strong centripetal force causing the denser materials to travel towards the bottom of the centrifuge tube more rapidly that they would under the force of normal gravity. The present high cost of imported centrifuges necessitates the design and construction of A Laboratory Centrifuge using local raw materials. The use of steel for the construction of …
Can the material for “Sustainable Approach to Converting Waste Paint Materials to Useful Products” be used as a guide for Environmental Science Project?
Yes it can be used — The study assesses the Sustainable Approach to Converting Waste Paint Materials to Useful Products. In achieving this aim, the following specific objectives were laid out to find out the process of Waste Paint Materials conversion to useful products, examine the factors affecting the transformation process waste paint materials to useful products and proffer a comprehensive waste minimization strategy that can be applied to the paint user industry. Primary data were collected from the primary source which questionnaire was used as an instrument of data collection while secondary data were sources from textbooks, journals, newspapers and the internet were employed. The data were presented on a frequency distribution table and analyzed using simple percentage, while hypothesis was tested using chi-square test. …
Is the topic “Design and Implementation of Web Based Land Information System” recommended for Computer Science (CS) Project?
Yes it is highly recommended — Land is a free gift of nature and a factor of production, land tenure is the name given, particularly in common law system to the legal regime in which land is owned by an individual, due to the fact that keeping records of lands and their owners has been a great task to government and the government access to land Information proves difficult that most times people are defrauded due to lack of Land Information illegal sales of land without the consent of the owner are very common. The aim of this study is to design and implement a Web Based Land Management Information software that will keep Information. In achieving this aim, the following specific objectives were laid out …
Can this topic “Design and Implementation of Commercial Vehicle Registration and Task Management System in a Campus” be used for Computer Science (CS) Project?
Yes it can be utilized for research — Commercial vehicle registration is a job that requires accuracy of data and this exercise is required for every new registration. The emergence of e-data processing system provides answer to the need for tools and alternative ways to improve well-being and activities of individuals. The aim of the study is to design and implement a commercial vehicle registration and task management system for Federal University of Petroleum Resource Effurun (FUPRE) campus. In achieving this aim, the following specific objectives were laid out as follows to design and develop an application software that will provide a better, easier and more efficient method of vehicle registration and equip the field DOT officials with an on-the-spot ease in verifying authenticity of any commercial vehicle …
Can the material for “The Impact of Exchange Rate on Export of Agricultural Product in Nigeria” be used as a guide for Economics Project?
Yes it can be used — This research work investigates the impact of exchange rate on export of agricultural products by the monetary authorities of Nigeria, using the least squares Statistical package .The data utilized for least square spanned between 1998-2008. From the finding of this research work, it was observed that the success of export of agricultural products critically depends on the exchange rate elasticity of foreign demand for the country’s export. In Nigeria’s case, exports are basically primary in nature i.e. either mineral or agricultural products which at reduced external prices (due to currency devaluation) do not significantly increase export earnings. Since the end result of Nigeria’s flexible exchange rate regime is currency denominated assets in the foreign exchange market in the policy is …
Can the material for “The Impact of Socio-cultural Practice on Substance Abuse Among Senior Secondary School Students” be used as a guide for Public Health Project?
Yes it can be used — Substance abuse has a negative impact on the education of undergraduates in different schools across the globe. Such drugs were used to relieve pain or cure and control diseases. The study was carried out to examine the Impact of Socio-cultural Practice on Substance Abuse among Senior Secondary School Students in Comprehensive Secondary School. Investigation revealed that the use of hard drugs including alcohol and cigarette is a major source of health and psychological problems among adults and young people in both developed and developing countries, including Nigeria. It is generally believed that most people who use these substances often begin at an early age and may continue throughout life. The research design used in this report is descriptive design, utilizing …
Can the material for “Design of a Computer Assisted Multiple Choice Examination System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — With the thoughtful application of emerging technologies and in a bid to improve on the effort towards the conduction of the multiple choice assessments, this project is designed to automate all multiple choice assessments and examinations in the department of computer science, Federal Polytechnic Nekede Owerri with the aim of cushioning the effects of the existing manual, system but most importantly, to encourage and implement a faster and better examination assessment service delivery in the department. In the course of developing the new system, the Microsoft visual Basic 6.0 programming language was used to code the modular programme for the new system in a top − down design approach it is important to note that the logic employed in the work …