
COMPUTERIZATION OF PRISONER COUNSELING AUTOMATED SYSTEM
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Computerization of Prisoner Counseling Automated System can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
![]() | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Computerization of Prisoner Counseling Automated System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Significance of Study
- 1.6 Scope of Study
- 1.7 Limitations of the Study
- 1.8 Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Computerization of Prisoner Counseling Automated System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Design and Fabrication of Attachable Wheelchair Automator” be used as a guide for Mechatronics Engineering Project?
Yes it can be used — The research paper aimed to Design and Fabricate an Attachable Wheelchair Automator. In achieving this aim, the following objectives were set out to; guarantee easy and comfortable wheelchair driving, facilitates learning to handle the chair and obtaining maximum efficiency, make the electronic system open to future additions, and provide the ultimate easy movement & effortless independent operation without assistance by handicapped. An automatic wheelchair or electric-powered wheelchair is a wheelchair that is propelled by means of an electric motor rather than manual power. Automatic wheelchairs are useful for those who are not able to impel a manual wheelchair or who may need to employ a wheelchair for distances or over terrain which would be strenuous in a manual wheelchair. Investigation …
Can the material for “Local Governance and the Development of Local Government Area” be used as a guide for Political Science Project?
Yes it can be used — The main aim of the research work is to find out the relationship between good governance and rural development, the research work made use of primary data obtained from the research questionnaires distributed among 200 respondents in Egbeda local government area of Oyo state, the chi-square and the pearson correlation were used for the purpose of analysis. The result of the analysis shows that there is a significant relationship between good governance and rural development. The research work found out that poor infrastructure have significant effect on the development of Egbeda local government area of Oyo State and proper recommendations were made to assist the state and the federal government in the development of Egbeda local government area of Oyo …
Can this topic “Assessment of Government’s Counter-Terrorism Strategy in Nigeria’s Internal Security (2009 – 2013)” be used for Political Science Project?
Yes it can be utilized for research — The research is an assessment of government‟s counter terrorism strategy in Nigeria‟s internal security between 2009-2013. Apart from the challenges of poverty, unemployment, sectarian crisis, economic and political crisis, as well as the Niger Delta Militancy, Nigeria is currently facing a deeper and profound challenge of terrorism, especially at the North-East of the country. The list of these disheartening phenomena includes but not limited to kidnapping, bombing and sporadic attack by gun men at several churches, mosques, public places, police stations, schools and prisons at Bauchi, Bornu, Yobe and Adamawa States. Other parts of the country that were not spared are the Federal Capital Territory, Abuja, Plateau, Kaduna and Kano States. Government’s attempt to adopt the strategy used in curtailing militancy …
Can the material for “The Influence of Performance Appraisal on Productivity in a Business Organization” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — While the concept of performance appraisal is not new, the study of employee perception of the concept is still going on. The way employees perceives performances appraisal affects the importance that is attached to it. Many managers see the performance appraisal process as an administrative rite that consumes a lot of time, while producing little more than frustration, confrontation, and piles of paperwork. This research work provides an assessment of the impact of performance appraisal on production and productivity taking a case study of First Bite Limited. The purpose of this research work is to help change the perception of employees from seeing performance appraisal as management confrontation activity targeted as generating frustration among employees but to see performance appraisal …
Can the material for “Feeds and Feeding of Sheep and Goat” be used as a guide for Agricultural Engineering (AE) Project?
Yes it can be used — Comparisons were made between 24 Ethiopian rams and 24 Galla goats for voluntary intake, feed selectivity and growth performance when offered three levels of sorghum stover. The levels observed were 25,50 and 75 g/kg live weight per day. Measurements of intake, growth and feed selectivity were taken over a period of 10 weeks. Both sheep and goats consumed more stover (P<0.001) as rate of offer was increased (22, 31, 32 gDM/kg live weight per day; 19,26,29 g/kg live weight per day, respectively, for sheep and goats). Increasing the level of offer beyond 50g/kg live weight per day did not, however, promote a substantial increase in intake. No difference (P>0.05) was observed in the pattern of feed selectivity between sheep and …
Can the material for “Effect of Exchange Rate Fluctuation on Imported Goods in Nigeria” be used as a guide for Economics Project?
Yes it can be used — The major aim of this research work is to know the effects of exchange rate fluctuation on imported goods in Nigeria. It is also aimed at ascertaining the level of relationship between the depreciation value of Naira and the pricing of imported goods in Nigeria. The fluctuating nature of exchange rate appears to be responsible for the exploitative pricing of imported goods in Nigeria. The objective of researcher is to address the following to know the reason of this upward movement of the pricing of goods in Nigeria. To discover only Nigeria dependable on importation to X − ray why then is steady rise in the price of imported goods these issues were addressed through theoretical and empirical approach within help …
Can this topic “Influence of Office Environment on the Job Performance of Office Workers” be used for Office Technology and Management (OTM) Project?
Yes it can be utilized for research — Office environment is an important component of work life for employees as employees spend significant part of their time at work, and it affects them in one way or the other. The aim of the study is to scrutinize the Effect of Working Environment on the Performance of Secretary in the Organization. In achieving this aim, the following specific objectives were laid out as follows to find out the: effect of office environment on the job performance of the office workers, effect of inadequate office furniture and fittings, modern machine on the job performance of workers, effect of good lighting, ventilation on the job performance of workers and impact of salary structure on the job performance of workers. The research …
Can this topic “Impact Assessment of Employee Motivation on Workers Performance” be used for Public Administration (PA) Project?
Yes it can be utilized for research — This study assessed the impact of employee motivation on workers performance in Nigeria Communications Commission. The objectives of the study were to examine the relationship between training and increased competence for staff of Nigeria Communications Commission, examine the relationship between financial incentives and work habits for staff of Nigeria Communications Commission and determine the effects of recognition on successful completion of task. The survey research design was used as the methodology. The sample size of the study consisted of one hundred (100) respondents representing 64% of the population of the study. Data for the study were obtained with the aid of self designed questionnaires. Simple percentage was used in the analyses of data obtained. The hypotheses were tested with the aid …
Can the material for “Cloud Based Teacher-Student Interaction System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Teacher-student interaction includes such two-way feedback process as thoughts and feeling exchange and information impactation. The aim of the study is to design and develop a Cloud Based Teacher-Student Interaction System using Federal Polytechnic Ado-Ekiti as a case study. In achieving this aim, the following specific objectives were laid out to develop a software that will establish teacher–student relationships development from daily classroom interactions between teacher and students, improve the study of how daily classroom interactions and teacher–student relationships influence each other, and experience the processes of a developmental time level denoted by the relatively stable state of certain human characteristics. The motivation of embarking on the research work is the Poor teacher–student relationships that are related to classroom management …
Is the topic “Design and Implementation of an Automated System for Inventory Control in a Manufacturing Company” recommended for Computer Science (CS) Project?
Yes it is highly recommended — This research work is concise and generally summarizes the activities duly carried out in the design and implementation of an automated inventory control system for a manufacturing organization. The system is designed to efficiently handle the movement and tracking of goods through the replacement of human workers by technology. The manual method or intervention is labour intensive, costly, and error prone and cannot ensure the inventory remains up-to-date due to oversight and internal shrinkage. With the proposed new system, inventory can be updated in real time without product movement, scanning, or human involvement. The automated system allows inventory status to be determined and shipping and receiving documents to be generated automatically triggering automatic orders for products that are low in inventory. …