CLONING OF A COMPUTER SYSTEM UNIT
ABSTRACT
Cloning of Computer System is very essential in a computing area. This project focuses more on how computer system could be coupled and maintained effectively and efficiently without any fault during assembling of the system. Throughout this project we shall focus on each and every component needed for assembling and also there functions. The main reason why people go for assembling of system instead of buying a new system is to allow them to have good and satisfactory quality of what they want. Buying a new computer system might not solve the problem of some people but coupling it themselves ease their wounds when it comes to satisfaction. The main important of coupling a computer system is to have access to all those components and to know how to couple and disassemble it when the system is faulty. This research has managed to purchase the Sub-Assembly computer components and couple it to make a computer system that could rival the performance of the branded version.
CHAPTER ONE
1.0 Introduction
Cloning computer system, gives maximum satisfaction to the user and a very rewarding experience. To Assembles Desktop PC (Personal Computer) the users/builders of such systems are probably contemplating building or assembling a computer instead of purchasing one pre-built or pre-assembled. This project is to enlighten us on how computer students can build a computer and peer to peer network with less stress and less amount of money, and how the computer built can meet up with the processing requirement of the school Laboratory. This research has managed to purchase the Sub-Assembly computer components and couple it to make a computer system that could rival the performance of the branded version.
1.1 Background for the Study
Cloning the computer system on this research embarks on gathering different components/devices of computer system together in other to make a well functioning computer system available to the computer laboratory (The Federal Polytechnic Ado-Ekiti) and to enable students to be more familiar to each components of the computer system. Thus, this project will cover all the process of purchasing components, coupling, and the process of installing the OS (operating system) into the computer system. Building or assembling Pentium IV computer brings significant benefits which is identified below.
- Know about computer components and how they fit and work together.
- Understanding the internal and hardware workings of a computer.
- Learning computer hardware terminology
- Ability to customize a computer according to specialized specifications.
- Building and assembling computer system from components.
- The satisfaction of a job well-done.
- Technical problem solving ability.
1.2 Motivation
My motivation grow in the view that, I have passion to know the functions of each and every components of the computer and to be able to build a functioning computer system that will be capable to be use in any school laboratories.
1.3 Objective of the Study
The main objective is to build well functioning computer with purpose of:
- Identifying computer components and how they fit and work together.
- Understanding the internal and hardware workings of a computer.
- Learning computer hardware terminology and geek-speak
- Ability to customize a computer according to specialized specifications.
- Building and assembling computer system from components,
- The satisfaction of a job well-done
- Gathering technical problem solving ability.
- Reduce the cost of buying new computer system.
1.4 Scope Of The Study
The scope of this research is to show how computer system could be purchased in parts, assembled and installed with required software to match a given configuration for the use in the laboratory.
1.5 Expected Contribution to Knowledge
The study is expected to specify the fact that computer is made up of several components functioning together as a single unit.
- It will enable us to know that hardware cannot work alone to makes a computer without software being installed.
- It gears us up to know the functionality of human to computer system.
1.6 Methodology
Data used in this work is derived primary from secondary sources. The methodology therefore, is basically documentary in nature. This involves learning new facts and principles through the study of documents and records. The documents and records include journals, textbooks, newspapers, magazines, official publications etc. By putting together logically evidence derived from documents and records. Conclusion which either established facts hitherto unknown or sound generalization can be obtained.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Cloning of a Computer System Unit can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.0 Introduction
- 1.1 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Cloning of a Computer System Unit" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.0 Introduction
- 1.1 Background …
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "Cloning of a Computer System Unit" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “The Impact of Thrift and Credit Cooperative Society on Workers Welfare and Productivity in an Organization” be used as a guide for Cooperative Economics and Management (CEM) Project?
Yes it can be used — The study was carried out to know the establishing the thrift and credit society Nigeria Bottling Company Owerri, their activities at a general level and to ascertain the benefits derived by members. Investigation revealed that in cooperative, due to their size and ownership structure member suffered a lot of financial especially that of collateral. However, the formation of thrift and credit society as a solution would help the members to save the small amount and out of that poor fund and economic depression loans are made available to members at a low rate of interest. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. Primary data were collected …
Can the material for “Hindrance to the Effective Performance of Secretaries in the Labour Force” be used as a guide for Public Administration (PA) Project?
Yes it can be used — In this project insight taken into the society working class its origin strongly and the various eocnomci political social and religious indices/ factors working for and or against it especially the secretaries and how the (working class) was been able to whether through the storms of life in chapter one the background of the study is seen the three basic needs of main food shelter and clothing and how man has been labouring to him to have them the derision/stratification of the labour force into unskilled and skilled labour was discussed. The statement of problem the purpose of the study the research question significance and hypothesis are seen. …
Can this topic “Production of High Quality Bar Soap and Compare with Detergent” be used for Biochemistry Project?
Yes it can be utilized for research — Soap is a class of products that serves for leaning of human property and surrounding. The study was carried out to produce of High Quality Bar Soap and Compare with Detergent. In achieving this aim, the following specific objectives were laid out to determine the Process and basic steps of producing bar soap and detergent and examine the quality control processes in the production of high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production considering several factors. In the production of bar soaps, palm kernel oil was used instead of fallow or grease. This is because palm kernel has a low titre value and gives …
Can the material for “Influence of Biology Practical on Academic Achievement of Secondary School Students” be used as a guide for Biology Education Project?
Yes it can be used — The study was carried out to investigate the Influence of Biology Practical on Academic Achievement of Secondary School Students in Enugu East Local Government Area. In achieving this aim, the following specific objectives were laid out to determine the influence of gender on academic achievement of students in biology and how teacher’s incompetence in the use of laboratory equipment affects student’s achievement in biology. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 150 (one hundred and fifty) respondents were selected for this study to represent the entire population of the study. For null hypotheses were formulated and tested using the one-way ANOVA and …
Can the material for “Nigeria Public Service, Problems and Prospect” be used as a guide for Public Administration (PA) Project?
Yes it can be used — This research is basically focused on the problems of Nigerians public service with Nigeria Television Authority channel 6 Aba as the case study. Many problems encountered by the Nigerian public service were realizes. The problems impede efficiency and productivity in the public service. The study was carried out for the purpose of explaining the relevance of public service in the state. And to comprehend the things that impede effective performance in the Nigerian public service, the impact of the problems was examined. Several ways of curbing the problem were stated. And recommendations were proffered. …
Can the material for “Design and Implementation of an Automated Voting Results Collection System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Automated voting refers to the option of using electronic means to vote in referendums and elections. The inefficiency of voting process in Nigeria has resulted in a lot of problems. These problems have continued to obstruct the peace of democracy in Nigeria because the choice of a capable candidate is not encouraged by the current system. The aim of the study is to Design and Implement an Automated Voting Results Collection System using Federal College of Education Technical Omoku as a case study. In achieving this aim, the following specific objectives were set out to design and develop a software platforms for voter registration, election voting, real-time election results collation and monitoring and mostly for voters remote access to elections, …
Is the topic “Incorporating Risk and Uncertainty Into Real Estate Valuation and Investment Appraisal” recommended for Estate Management (EM) Project?
Yes it is highly recommended — The study was conducted to investigate how Nigerian Valuers account and communicate risk and uncertainty to client in property valuation and investment appraisal. Investigation revealed that property valuation profession in Nigeria has consistently failed to accommodate the new challenges of clientele in the country who are continuously attaining some higher level of sophistication. This is a dangerous trend bearing in mind that poorly prepared property valuations have had far reaching negative consequences across the globe. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 80 (eighty) respondents were selected for this study to represent the entire population of the study. Primary data were collected …
Can the material for “The Impact of the CBN Banking Reform Police on Nigerian Economy” be used as a guide for Accountancy / Accounting Project?
Yes it can be used — This work centered on the impact of the CBN banking reform policies on Nigeria Economy. The following was carried out under setting steps. To identified the may or CBN banking reform polices on Nigeria Economy. The banking sector to play its roles has been periodically punctuated by its vulnerability to systematic distress fume turning invitablimenty. This paper is armed at reviewing the impact of CBN banking reform polices in particular, the complementary polices and out comes of the recent reform such reform as it relates to law and regulatory and supervisor aspect of the central bank of Nigeria control of financial systems. …
Can the material for “Privatization of Public Enterprises Its Effect on Consumer in Nigeria” be used as a guide for Public Administration (PA) Project?
Yes it can be used — This study has focused on privatization of state owned enterprises in Nigeria. A case study of Nigeria Telecommunication (NITEL). The major problem stem from inadequate and irregular finding, political interference in operations. The data collection instrument used was the primary and secondary data, two statistical tools were used for evaluating the finding of the study the simple percentage for analyzing the respondents and chi-square (X2) for testing the hypothesis. This study is in five chapters viz: The introduction, literature review, research methodology, data presentation, analysis and interpretation, summary, conclusion and recommendation. Majority of the respondent’s response that privatization has brought more efficiency and also that privatization policy of NITEL has contributed to the morale of the workers and employee productivity. It is also …
Can the material for “Cooperative Marketing and Transportation” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — This work tends to present cooperative marketing and transportation Anambra State. In so during, the study emphasizes as a whole, the marketing activities of Ogbo-Efere Cooperative Societies in Anambra State. The research work was undertaken to examine and analyze the impact of cooperative Marketing in Anambra State. The data were mainly collected through questionnaire and personal interview directed to society. The researcher also use primary and secondary data to source the information used. The researcher used table, percentage and the technique for data analysis is the chi-square. It was discovered that Cooperative Marketing and Transportation in Anambra State are facing many problems especially transportation problem and infrastructural problem. Base on the findings of the researcher some recommendations were made to panacea and …