Project Topics | Seminar Topics | Related Topics
Biosorptive Potentials of Unmodifies, Chemically Modified and Carbonized Sawdust From Some Woody Materials for Zn, Cu and Ni

BIOSORPTIVE POTENTIALS OF UNMODIFIES, CHEMICALLY MODIFIED AND CARBONIZED SAWDUST FROM SOME WOODY MATERIALS FOR ZN, CU AND NI


CHAPTER ONE

1.1 Introduction

… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.


CHAPTER TWO

2.0 Literature Review

2.1 Introduction

The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …


Procedure for Downloading the PDF (Docx) Material


Biosorptive Potentials of Unmodifies, Chemically Modified and Carbonized Sawdust From Some Woody Materials for Zn, Cu and Ni can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.


Seminar Material Cost
₦3,000
Project Material Cost
₦5,000


Request Complete Material

Complete Material Chapters of Biosorptive Potentials of Unmodifies Chemically Modified and Carbonized Sawdust From Some Woody Materials for Zn Cu and NiClick here to request the Complete Material via WhatsApp including;
  • Preliminary Pages,
  • Chapter 1-5,
  • References and Appendix.



TABLE OF CONTENTS

PRELIMINARY PAGES


CHAPTER ONE

INTRODUCTION


    • 1.1 Introduction
    • 1.2 Background …

    CHAPTER TWO

    LITERATURE REVIEW

    • 2.1 Introduction

    CHAPTER THREE

    MATERIALS AND METHODS

    • 3.1 Introduction

    CHAPTER FOUR

    RESULTS AND DISCUSSION

    • 4.1 Introduction
    • 4.2 Results
    • 4.3 Discussion of Findings

    CHAPTER FIVE

    SUMMARY, CONCLUSION AND RECOMMENDATION

    • 5.1 Introduction
    • 5.2 Summary
    • 5.3 Conclusion
    • 5.4 Recommendation

    REFERENCES


    Disclaimer for Complete Material Utilization

    The displayed research work titled "Biosorptive Potentials of Unmodifies, Chemically Modified and Carbonized Sawdust From Some Woody Materials for Zn, Cu and Ni" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.


    Frequently Asked Questions (FAQ)


    Can the material for “Design and Implementation of File Encryption and Decryption System” be used as a guide for Computer Science (CS) Project?

    Yes it can be used — File encryption attempts to ensure secrecy in communications, such as those of spies, military leaders, and diplomats, but it have also had religious applications. The aim of the study is to design and implement a File Encryption And Decryption System. In achieving this aim, the following specific objectives of study were considered to design and develop an application software that will understand and improve the file data security through encryption of data, protect the pdf file (.pdf) from being viewed by third party using encryption and ensure the data confidentiality and integrity along with the safe transmission of file data over the web. The motivation that led to the implementation of the proposed system is that the password method used …


    Can the material for “The Relationship Between Employee Participation in Decision Making and Work Performance in the Manufacturing Sector” be used as a guide for Business Administration and Management (BAM) Project?

    Yes it can be used — This study examines the relationship between employee participation in decision making and work performance in the manufacturing sector in Imo State. Data were generated by means of questionnaires 50 manufacturing firms on employee participation in decision making and performance variables. Responses from the survey were statistically analyzed using chi-square. The results of the study indicate a statistically significant relationship between employee involvement in decision making and firms’ performance as well as reveal a significant difference between the performance of firms whose employee participate in decision making are deep and the performance of firms whose employee involvement in decision making are slow. The findings also reveal the involvement of participating firms in employee involvement in decision making. The implications of this …


    Is the topic “A Secured Graphical Authentication for Web Based Applications” recommended for Computer Science Education Project?

    Yes it is highly recommended — Graphical Authentication is the primary gatekeeper for graphics systems accessibility, it verifies authorized users of a system and distinguishes between different users. The main aim of the study is to Design and Implement a Secured Graphical Authentication for Web Based Application software that will be used to design graphics such as; pictures of different format such as: jepg, and png. In achieving this aim, the following specific objectives were laid out to develop a software that will request for the system user authentication details before accessing the graphics software, design a database that will store or save graphics works for retrieval purpose, and develop a software that will encrypt user authentication input details. The methodology adopted in this study is …


    Is the topic “Consequences of Polygamous Marriage in Christian Home” recommended for Religious Studies Project?

    Yes it is highly recommended — Polygamy is a process whereby or which permits a man marry more than one woman or wife, while polyandry has to do with a woman, who married to more than one man or husband. The study was carried out to scrutinize the Consequences of Polygamous Marriage in Christian Home. In achieving this aim, the following specific objectives were laid out as follows to: identify the consequences of polygamous family unit on the Christian in Oredo Local Government Area, and highlight the factors which gave rise to polygamous family unit, to offer suggestion that will bring about lasting solution to this menace. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents …


    Can the material for “Design and Simulation of a Secured Wireless Network” be used as a guide for Computer Science (CS) Project?

    Yes it can be used — This project topic “Secured Wireless Network” was carried out with a view to deploying effective security for wireless networks. The project developed a system that lets typical users easily build a highly secured wireless network. My aim is to show how user interface can be applied to provide a complete solution for securing wireless networks. Securing a wireless network is an important issue since they are wireless broadcasting a signal out over an area, any computer within this area with the correct equipment can be considered to be connected to the network, so an effective security measures has been deployed that allows users to intuitively manage the network security of their mobile devices, even those with limited user interface. …


    Can this topic “Enhancing Nigerian Economy Through Wireless Internet Network” be used for Computer Science Education Project?

    Yes it can be utilized for research — Wireless Internet Networks is an unprecedented increase in access to telephone services growth has been driven primarily by wireless technologies and the liberalization of telecommunications markets, which allowed for faster and cheaper roll out of mobile networks. The aim of the study is to design a wireless network system application that will connect multiple users to a wireless network. In achieving this aim, the following specific objectives were laid out as follows to design a system that will determine the nature of wireless internet network, and establish the role of wireless internet network in enhancing the Nigerian economy. The methodology adopted in this study is the object oriented analysis and design methodology (OOADM) which is a technical approach for analyzing …


    Can the material for “Investigation of Arthropod Predators and Insect Pest Control” be used as a guide for Zoology Project?

    Yes it can be used — Insect pests are those insect species that are injurious or a nuisance. They cause injury or damage to crops in the field and grains in storage. The study was carried to investigate of arthropod predators and insect pest control. In achieving this aim, the following specific objectives were laid out to investigate the advantage of arthropod predators to farmers and examine the rate of Arthropods predators in farmlands. Investigation revealed that many arthropod pests are exotic the aim of classical biological control is to reduce pest numbers by reuniting old enemies through importation of predators from the area of insect pest origin. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the …


    Can the material for “Impact of Budget and Budgetary Control” be used as a guide for Business Administration and Management (BAM) Project?

    Yes it can be used — This research work is carried out to determine the impact of budget and budgetary control with special reference to Morris fertilizer company Minna Niger State. This topic is chosen because of dearth in the awareness as regards the contribution of budget and budgetary control in the improvement of the overall performance of an organization. However for the purpose of this work the researcher highlights the purpose an effective budgetary control could serve an organization. Types of budgets preparation of a budge manual as well as the budgeting concepts with emphasis on the planning programming budgeting system (PPBS) was death with extensively in the project work by the researcher. Data were collected from both primary and secondary sources the analysis of …


    Can the material for “An Evaluation of Monetary Policy in Nigeria and It’s Impact on Economic Growth (1984 - 2015)” be used as a guide for Economics Project?

    Yes it can be used — The study examined an evaluation of monetary policy in Nigeria and its impact on economic growth. More specifically, the study sought to assess monetary policy and economic growth in Nigeria. The study focuses on major growth components such as the Gross Domestic Product (GDP), and price level, while qualitative research method was adopted. The variables of interest germane of the study are real gross domestic product (RGDP), broad money supply (M2), required reserve ratio (RRR), discount rate (DIT) and inflation rate (INF). The econometric techniques use to analyze the data are Unit Root test, Johansen Cointegration test, Ordinary Least Square (OLS) technique and the Granger Causality test. Result from the study indicated that there is no pair wise causality between M2 and RGDP, RRR and …


    Is the topic “The Effect of Motivation on Employee’s Performance in Global Polythene Industry” recommended for Human Resource Management (HRM) Project?

    Yes it is highly recommended — The research project attempt to examine the effect of motivation on employees’ performance in global polythene industry Kaduna. The objectives of the study amongst others are to determine the relationship between motivation and performance and to assess the adequacy of employees reward in global polythene industry. The researcher adopted questionnaire and interview in the collection of primary data and documentary evidences such as literature review for secondary data. It was found out that incentives are not the only tools for motivating employee’s other motivational factor or tools discovered includes good working tools, good work environment, equitable salaries, and recognition e.g. promotion. The researcher recommended that motivational tools such as training should be extended to junior staff and those employees should …



    Chat with us on WhatsApp