ASSESSMENT OF ANALAYSIS AND CONTROL OF OVERHEAD EXPENSES IN MANUFACTURING INDSUTRY IN NIGERIA
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Assessment of Analaysis and Control of Overhead Expenses in Manufacturing Indsutry in Nigeria (A Case Study of Ola-Oluwa Aina Wire Industry Limited, Osogbo) can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Assessment of Analaysis and Control of Overhead Expenses in Manufacturing Indsutry in Nigeria" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "Assessment of Analaysis and Control of Overhead Expenses in Manufacturing Indsutry in Nigeria" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “The Impact of IMF’s Structural Adjustment Programme on the Economic Development of Nigeria (1986-2008)” be used as a guide for Economics Project?
Yes it can be used — The adoption of the International Monetary Fund (IMF) Structural Adjustment Programme (SAP) in 1986 resulted in the transition from fixed exchange rate regime to floating exchange rate regime in Nigeria. Ever since, the exchange rate of naira vis-à-vis the U.S dollar has attained varying rates all through different time horizons. On this basis, this study examines the reliability, persistency, and severity (degree) of volatility in exchange rate of Nigerian currency (naira) vis-a-vis the United State dollar using monthly time series data from 1986 to 2008. International Monetary Fund (IMF) is a large organization, a system of government that functions by rules. They give loan and advices to member states. IMF was envisaged as a financial institution with lending power designed …
Can the material for “The Role of Nigerian Stock Exchange in Industrial Development” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — The Nigerian stock exchange (NSE) has been created to serve various function such as often of business guideline to top business management concerning cost of capital for the Nigerian stock exchange provides avenues for long term investment. These function credited to the stock exchange is expected to create positive effect on the general business and industrial growth of the country. However, this research work is determined to evaluate the effect of the stock. Exchange on the general business growth especially in recent years. In carrying out the research work with the above aim in mind efforts will be made to disclose relevant findings thus drawing necessary solutions and recommendations to alleviate some anticipated problem on the Nigerian stock exchange to be …
Can this topic “Effect of Processing on the Storage Stability and Functional Properties of Cowpea Flour in the Production of Moin-Moin and Akara” be used for Food Science and Technology (FT) Project?
Yes it can be utilized for research — Flours prepared from cowpea variety white using different processing methods (germination, heat treatment, fermentation and the untreated flour) were evaluated for proximate composition, functional, sensory properties and storage stability. The fermented and germinated samples were found to be richer in carbohydrate content with 59.72% and 57.78% respectively while the untreated flour had the highest protein content (27.87%). The untreated flour also compared favorably with the control (wet processed paste) in terms of organoleptic properties in the production of akara and moin-moin. For storage, after three months, the germinated cowpea flour was found to be more stable in terms of reduction in moisture with 10.2%, followed by fermented and untreated flour and then heat treated flour with 10.6%, 10.6% and 10.8% …
Is the topic “Information Hiding Using Digital Steganography” recommended for Computer Science (CS) Project?
Yes it is highly recommended — Steganography is the art of hiding the fact that communication is taking place, by hiding information in other information. Many different carrier file formats can be used, but digital images are the most popular because of their frequency on the internet. For hiding secret information in images, there exists a large variety of steganography techniques some are more complex than others and all of them have respective strong and weak points. Different applications may require absolute invisibility of the secret information, while others require a large secret message to be hidden. This project report intends to give an overview of image steganography, its uses and techniques. It also attempts to identify the requirements of a good steganography algorithm and briefly …
Can the material for “The Impact of Small and Medium Scale Industries on the Economic Growth of Nigeria (1986 - 2010)” be used as a guide for Economics Project?
Yes it can be used — The study investigates the impact of small and medium scale industries on the Nigerian economy, spanning from 1986 to 2010. The study adopted Ordinary Least Square (OLS) Linear Specification model. Using unit root test, the work shows that small scale industries significantly contributed to the economic growth in Nigeria despite poor funding by commercial banks. The work recommends among others that government should improve its monetary policies so as to reduce to an acceptable level, the rate of interests charged by commercial banks as well as encouraging rural based industrialization, whereby investors are encouraged to establish small and medium scale industries that would be based entirely on local raw materials, machines and equipments. …
Is the topic “The Effect of Taxation on Manufacturing Firms” recommended for Banking and Finance (BF) Project?
Yes it is highly recommended — From original conception, taxation may be regarded as an assessment imposed by the government to meet the express of government structures. The aim of this research is to find out how taxation effect, the manufacturing firms with reference to Ikeji plastic company limited Onitsha. The research seeks to find out if these effect are positively oriented or negatively oriented. The study is carried out as step towards giving answer to these problems. In attempt to solve the research questions, questionnaires were used to guide the study the collected data and stated questions were later analyzed and tested using arithmetic percentages. The influences and deducation drawn from these analyzes and tested reveals certain facts. It was discovered that the effect of taxation on the …
Can the material for “The Causes and Effects of Liquidity Problem on the Nigeria Banking Industry” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — This research project is a very crucial study for the Nigeria Banking Industry. The research work is aimed at identifying the causes of liquidity problems in the Nigerian Banking Sector. By this concept, factors militating against Bank liquidity as well as measure to remedy such factors are also identified. To solve the research problem secondary source of data was extensively used by the research that in the review of related materials by prominent writers and authors. This helped immensely to obtain facts on the issues relating to liquidity problem in the Nigerian Banking sector. Furthermore, the research work is established on five different chapters, therefore the research in been able to establish her finding appropriately the cause of liquidity problems such as …
Can the material for “Microbial Profile of Suya Meat in Ado-Ekiti Metropolis” be used as a guide for Microbiology Project?
Yes it can be used — Suya meat is produced by smoking the raw beet with the addition of some spices, salt, oil, groundnut cake and flavors, the meat is first sliced into smaller pieces and the spices are rubbed onto it, it is later oven dried or over local source of heart. This allows the meat to get dried properly with the right taste before is gold to the consumers. The study determines the Microbial Profile of Suya Meat. In achieving this aim, the following specific objectives were laid out to isolate, microbial species associated with suya meat and identify the microbial species associated with the suya meat. Ten (10) samples of suya meat in Enugu were collected randomly and analyzed microbiologically and the isolates …
Can this topic “The Impact of Leadership Styles on Staff Performance” be used for Economics Project?
Yes it can be utilized for research — Leadership style is the way which influence process is exercised. It is the characteristics ways in which the leadership relates to their employees. The study was carried out to investigate the Impact of Leadership Styles on Staff Productivity Performance in Imo State Polytechnic Library. In achieving this aim, the following specific objectives were laid out to find out the impact of Leadership Styles on Staff productivity and performance in this library and factors responsible for the choice of leadership style in the library of Imo state polytechnic, Umuagwo. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. Primary data were collected from the primary source which questionnaire …
Can the material for “Design and Implementation of Computerized Fraud Detection System in Banks” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Fraud is the deliberate deception practiced with a view to gaining an unlawful or unfair advantage. The aim of the study is to Design and Implement a computerized fraud detection system to prevent fraud. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will aid in monitoring and controlling of fraudulent and provide quick enquiry about information in financial sectors. The motivation that led to the implementation of the proposed system is as a result of the losses of bank fraud can affect all consumers, merchants and issuing banks. The methodology adopted in this study is the structured system analysis and design methodology (SSADM) which is a technical approach for …