ASSEMBLING OF A PORTABLE COMPUTER SYSTEM
ABSTRACT
Assembling of portable computer system is very essential in a computing area. This project focuses more on how computer system could be coupled and maintained effectively and efficiently without any fault during assembling of the system. Throughout this project we shall focus on each and every component needed for assembling and also there functions. The main reason why people go for assembling of system instead of buying a new system is to allow them to have good and satisfactory quality of what they want. Buying a new computer system might not solve the problem of some people but coupling it themselves ease their wounds when it comes to satisfaction. The main important of coupling a computer system is to have access to all those components and to know how to couple and disassemble it when the system is faulty. This research has managed to purchase the Sub-Assembly computer components and couple it to make a computer system that could rival the performance of the branded version.
CHAPTER ONE
1.0 Introduction
Assembling of a Portable Computer System, gives maximum satisfaction to the user and a very rewarding experience. To Assembles Desktop PC (Personal Computer) the users/builders of such systems are probably contemplating building or assembling a computer instead of purchasing one pre-built or pre-assembled. This project is to enlighten us on how computer students can build a computer and peer to peer network with less stress and less amount of money, and how the computer built can meet up with the processing requirement of the school Laboratory. This research has managed to purchase the Sub-Assembly computer components and couple it to make a computer system that could rival the performance of the branded version.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
Assembling of a Portable Computer System can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Background of the Study
- 1.2 Motivation
- 1.3 Objectives of the study
- 1.4 Scope of the study
- 1.5 Expected contribution to knowledge
- 1.6 Methodology
LITERATURE REVIEW
- 2.0 Introduction
- 2.1 History of processor
- 2.2 Function of the computer System
- 2.3 Where to get the parts/components
- 2.4 Factors that affect the choice of any part/peripheral devices
- 2.5 Factors affecting/problems encountered during assembling
- 2.6 Definitions of Terms
SYSTEM IMPLEMENTATION
- 3.1 Tools required to set-up the computer
- 3.2 The components/parts required for pc assembly
- 3.3 The external and peripherals components
- 3.4 Pictures of the above mentioned components and devices
SYSTEM DESIGN AND EVALUATION
- 4.1 Features of the Computer
- 4.2 Procedural for the assemblage of the pc (personal computer)
- 4.3 Process of assembling the pc
- 4.3.1 Installing a socket processor and the heat sink on the motherhood
- 4.3.2 Installing memory modules
- 4.3.3 Installation of the motherboard
- 4.3.4 Installing the CDROM and hard disk drives
- 4.3.5 Connecting the power supply cables to the motherboard
- 4.3.6 Connecting the motherboard to the drives
- 4.3.7 Connecting the front panel cable
- 4.4 Installing the Operating System
- 4.4.1 Step One: Setting the BIOS
- 4.4.2 Step Two: Installing the Windows operating system
- 4.4.3 Step Three: Activating the Windows operating system
- 4.4.4 Step Four: Install Windows Updates
CONCLUSION AND RECOMMENDATION
- 5.1 Conclusion
- 5.2 Recommendation
REFERENCES
Disclaimer for Complete Material Utilization
The displayed research work titled "Assembling of a Portable Computer System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Background of the Study
- 1.2 Motivation
- 1.3 Objectives of the study
- 1.4 Scope of the study
- 1.5 Expected contribution to knowledge
- 1.6 Methodology
LITERATURE REVIEW
- 2.0 Introduction
- 2.1 History of processor
- 2.2 Function of the computer System
- 2.3 Where to get the parts/components
- 2.4 Factors that affect the choice of any part/peripheral devices
- 2.5 Factors affecting/problems encountered during assembling
- 2.6 Definitions of Terms
SYSTEM IMPLEMENTATION
- 3.1 Tools required to set-up the computer
- 3.2 The components/parts required for pc assembly
- 3.3 The external and peripherals components
- 3.4 Pictures of the above mentioned components and devices
SYSTEM DESIGN AND EVALUATION
- 4.1 Features of the Computer
- 4.2 Procedural for the assemblage of the pc (personal computer)
- 4.3 Process of assembling the pc
- 4.3.1 Installing a socket processor and the heat sink on the motherhood
- 4.3.2 Installing memory modules
- 4.3.3 Installation of the motherboard
- 4.3.4 Installing the CDROM and hard disk drives
- 4.3.5 Connecting the power supply cables to the motherboard
- 4.3.6 Connecting the motherboard to the drives
- 4.3.7 Connecting the front panel cable
- 4.4 Installing the Operating System
- 4.4.1 Step One: Setting the BIOS
- 4.4.2 Step Two: Installing the Windows operating system
- 4.4.3 Step Three: Activating the Windows operating system
- 4.4.4 Step Four: Install Windows Updates
CONCLUSION AND RECOMMENDATION
- 5.1 Conclusion
- 5.2 Recommendation
REFERENCES
Disclaimer for Complete Material Utilization
The displayed research work titled "Assembling of a Portable Computer System" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “The Impact of Merging on the Banking Industry” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — This research studied the Impact of Merge in the Banking Industry. The factor that prompted this study was the decrease in bank profitability, increase in number of bank failures, loss of customers depositors confidence etc. The study measured the extent merger and acquisition had impacted on the profitability of commercial banks in Nigeria, examined the extent to which merger and acquisition affected the market share of commercial banks and also to examined how merger and acquisition had improved customers service in commercial banks. This study adopted the survey research design and this entailed administration of well structured questionnaire drawn from Eco Bank Plc, Asaba. The research made use of the Chi − Square statistical tools. I found that merger and acquisition …
Is the topic “The Problem Facing Commercial Banks in Nigeria” recommended for Accountancy / Accounting Project?
Yes it is highly recommended — Commercial banks in Nigeria have been facing a of problem. These problem ranges from integrity factors location factor technological factor unstable management incompleteness of board members and unqualified personnel. Therefore this study was aimed at looking into these problems so as to ascertain the impact on commercial banks as well as suggesting the possible ways of eliminating these problems. The researcher used three commercial banks for effective analysis namely union bank of Nigeria united bank of African and Afric bank. In order to be arrive at a conclusion decision interviews literature review and personal observation were employed as the means of data collection. The three banks used were fund to be having almost the same basic problems even though some were bigger …
Is the topic “Working Capital Management in Automobile Industry” recommended for Automobile Technology Education Project?
Yes it is highly recommended — Working capital is the ability of a business to meet its short-term liabilities as the full due out of its short-term assets. It is therefore necessary that an industry should always maintain a well-articulated and consistent management of its working capital. To facilitate the exposition of this research work for a clear understanding by our readers, this work had been divided into three chapters. In course of the study hypothesis were development, it was observed that automobile industry had adequate working capital to improve efficiency of its production we observed that automobile industry had adequate and good quality capital position though it has no credit policy for its customers. Based on these we concluded that, automobile industry has effective working capital management. Also …
Can the material for “Problems of Teaching Social Studies in Secondary School” be used as a guide for Social Studies Project?
Yes it can be used — This study focused on the problems of teaching social studies in secondary schools in Awgu Local Government Area of Enugu State. The objective of this study was to determine the problems of teaching social studies in Awgu Local Government Area of Enugu, four research questions was formulated to guide the study. The population of the study was sampled and two hundred (200) respondents was selected in the secondary schools in Awgu Local Government Area of Enugu. The instrument used for data collection was questionnaire, it was presented in tabular form. The findings revealed that there are inadequacy of qualified social studies teachers. The finding also was that assess to the problem caused by insufficient of teaching materials for effective teaching and …
Is the topic “The Impact of Training to the Development of the Maritime Industry” recommended for Maritime and Transport Project?
Yes it is highly recommended — The study was carried out to examine the Impact of Training to the Development of the Maritime Industry with specific reference to Nigeria Maritime Administration and Safety Agency (NIMASA), Apapa, Lagos State. In achieving this aim, the following specific objectives were laid out to examine whether lack of adequate funding impact manpower development and evaluate whether technological changes impact manpower development in the Nigerian maritime industry. Investigation revealed that one of the most prominent problems facing the transport industry is the lack of adequate human resource development or manpower training development to service the industry. Also, the human factor is the most sensitive and volatile of all factors of input in production and therefore requires proper handling so that the …
Can the material for “Impact of Employees Motivation on the Impact of Change Management in Nigerian Banking Industry Organizational Productivity” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — The research topic of this study is the impact of change management in Nigerian Banking Industry, A study of United Bank for Africa (UBA) station Road, Enugu. The research was a descriptive research, the researcher made use of primary sources and secondary sources of data. The primary sources of data was obtained through questionnaire and oral interview while secondary sources was sourced through texts books ,journals and magazines The population of the study was seventy seven (77) employees. The sample size was 77 employees of the bank. The finding revealed among others that change management results to quality services. The researcher recommended among others that management should ensure effective communication link between management and workers before any change process is …
Can this topic “Design and Implementation of an Online Assignment Plagiarism Checker System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — Plagiarism is the act of abuse, publication, statement, or claims as your own the thoughts, ideas, writings, or a creature that actually belongs to someone else. The aim of the study is to design and implement an Online Assignment Plagiarism Checker System. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will research on some important methodologies that have been used to detect external plagiarism, enable the detection of plagiarized content based on titles of projects whether a project already existing in the reference corpus has been plagiarized by a new research and display the similar sentences among the files in the submitted by the students if any presented. The …
Can the material for “The Role of an Auditor in Small Business Organisations” be used as a guide for Entrepreneurship Project?
Yes it can be used — A significant contribution to the development and survival of business organization is the role that auditors play. This research work, The Role of Auditors in Small business organizations, give a broad understanding of what the auditors role entails. In the course of this research, data was collected by means of questionnaire. The collected data were analyzed with the aid of percentages. Further analysis was done on relevant information. The statement of research hypothesis was tested using chi-square distribution. The use of internal control questionnaire and evaluation forms by auditors, to ascertain and evaluate the strengths and weaknesses of internal control systems of business organization, with a view to determining the degree of reliance to be placed on the internal control system, is …
Can the material for “Impact of Manpower Training on Service Performance” be used as a guide for Industrial Relations and Personnel Management (IRPM) Project?
Yes it can be used — This study examines the importance of manpower training on service performance in Nigeria Nigeria Limited. To access the situation well structured questionnaire were administered using simple random techniques. The data collected were analyzed using simple tables percentage and Chi-square Statistical Technique method. The result indicates that Training of workforce has a significant effect on productivity. It was also discovered that On-the-job training is preferable to the off-the-job training with the organization. …
Can the material for “The Effect of Internet on Nigerian Students” be used as a guide for Mass Communication (MC) Project?
Yes it can be used — The internet is a modern day technology that has change the way the world goes about doing things. It is one more point in a long continues of invention that is set to revolutionize life style. Nations, organizations and individuals tend to seek holistic developments in areas of cultural believe, social live, religion, educations, politics and economics well being. This research project seeks to analyze the use of the internet in student's lives and the effects which this exposure has had on the users especially the FUTO students. At any given point, students are online and this interaction especially in the developing world who are the receivers of information has effected some indisputable modifications in different areas of students live. …