AN EVALUATION OF PRODUCTION SCHEDULING AND CONTROL IN A MANUFACTURING INDUSTRY
CHAPTER ONE
1.1 Introduction
… This chapter will address the background information that motivated this study, the challenges that prompted it, its aim, and its objectives as a preface to subsequent sections of the study. Additional factors include the study's significance, scope, limitations, research questions and hypotheses, and the definition of technical terms.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
An Evaluation of Production Scheduling and Control in a Manufacturing Industry can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "An Evaluation of Production Scheduling and Control in a Manufacturing Industry" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- 1.2 Background of Study
- 1.3 Statement of the Problem
- 1.4 Aim and Objective of the Study
- 1.5 Research Questions
- 1.6 Research Hypothesis
- 1.7 Significance of Study
- 1.8 Scope of Study
- 1.9 Limitations of the Study
- 1.10 Operational Definition of Terms
LITERATURE REVIEW
- 2.1 Introduction
- 2.2 Conceptual Review
- 2.3 Theoretical Framework
- ⋮
- 2.4 Empirical Studies
- 2.5 Research Gaps
- 2.6 Summary of Literature Review
CHAPTER THREE
RESEARCH METHODOLOGY
- 3.1 Introduction
- 3.2 Research Design
- 3.3 Population of Study
- 3.4 Sampling and Sampling Technique
- 3.5 Validation of Research Instrument
- 3.6 Method of Data Collection
- 3.7 Method of Data Analysis
- 3.8 Questionnaire Administration
- 3.9 Ethical Consideration
- 3.10 Statistical Analysis
CHAPTER FOUR
DATA ANALYSIS, RESULT AND DISCUSSION
- 4.1 Introduction
- 4.2 Presentation and Analysis of Data
- 4.3 Re-statement of Research Questions
- 4.4 Test of Hypotheses
- 4.5 Discussion of Findings
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary of Findings
- 5.3 Conclusion
- 5.4 Recommendation
- 5.5 Suggestion for Further Study
REFERENCES
APPENDIX A - “QUESTIONNAIRE”
Disclaimer for Complete Material Utilization
The displayed research work titled "An Evaluation of Production Scheduling and Control in a Manufacturing Industry" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “The Use of Google ads as a Determinant for Marketing Effective Library Service” be used as a guide for Library and Information Science (LIS) Project?
Yes it can be used — The study explores the Use of Google ads as a Determinant for Marketing Effective Library Service in Edo State. In achieving this aim, the following specific objectives were laid out to assess the Google ads Marketing Strategies in Promoting Library Service Delivery, investigate marketing of Academic libraries services, determine the need for marketing library services in academic libraries, determine Library Services for Google Ads Marketing in Academic libraries, examine the extent of marketing library services, examine strategies for enhancing marketing of library services, and determine current techniques employed by academic libraries in marketing of library services in Edo state. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this …
Can the material for “Effects of Malnutrition Among Children” be used as a guide for Nursing (Science) Project?
Yes it can be used — The study was conducted to find out and describe why developing countries are associated with malnutrition complications and the impact is having in the health and lives of children. Although rare in developed countries, malnutrition in children remains a menace in many developing countries. Malnutrition occurs most commonly in Southern Asia and Sub-Saharan Afri-ca. The effective management of Severe Acute Malnutrition (SAM) is a huge challenge in low resource healthcare locations. The method of data collection was systematic literature review which means conducting a literature search, selecting data relevant to the purpose question, description of the data selected and analyzing the data. This review was based on books from Laurea University of Applied Science's library, Helsinki university library and previously conducted …
Is the topic “Impact of Teaching Planning on Students Achievement in Biology” recommended for Education Project?
Yes it is highly recommended — Teaching and planning are different ways employed by a teacher to impart knowledge to the learners. The aim of the study is to examine the Impact of Teaching Planning on Students Achievement in Biology using Secondary School Students in Ado-Ekiti, Ekiti State. In achieving this aim, the following specific objectives were laid out as follows to: ascertain the impact of teaching planning on students achievement in biology, ascertain the teaching method and academic performance of student in Biology, ascertain the causes of poor performance of student in Biology, and ascertain whether teacher’s qualification affect student performance in Biology. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. …
Can the material for “Effects of Forensic Accounting in Fraud Detection” be used as a guide for Accountancy / Accounting Project?
Yes it can be used — This study investigated the effects of forensic accounting in fraud detection. Data was collected from the staff of Nigeria National Petroleum Corporation (NNPC) with the aid of questionnaire as the research instrument. Convenience sampling methods was applied to select 53 respondents from the population of the students on which questionnaire were administered. Fifty of the questionnaire were completed and returned. The collected data were analyzed and presented using frequency distribution tables in which simple percentages of frequency were shown. Pearson Correlation Coefficient was applied to test the stated hypotheses. The objectives of the study are; to determine the chances of fraud discovery through forensic accounting in the petroleum sector, to help in narrowing the audit expectation gap and to ascertain …
Can the material for “Cloud Computing a Better Means of Information Technology Outsource” be used as a guide for Computer Science Education Project?
Yes it can be used — The research focuses on cloud computing as a better means of it outsourcing. It provides an analytical framework in the nature of cloud computing, Characteristics and source models. It also provides a detail study in cloud computing as a better means of it outsource. …
Can the material for “Fraud Detection and Control in Cooperative Thrift and Credit Societies” be used as a guide for Cooperative Economics and Management (CEM) Project?
Yes it can be used — Cooperative thrift and credit societies emerged as a result of people coming together, posting their resources in mutual effort in order to solve their problem. The study examines the Fraud Detection and Control in Co-operative Thrift and Credit Societies using any Selected Credit Co-operative Societies in Ahiazu Mbaise LGA, Imo State as a case study. In achieving this aim, the following specific objectives were laid out to determine the cause of fraud in cooperative thrift and credit society, identify the prevalent fraud in cooperative thrift and credit societies and provide solution on how fraud can be control in cooperative thrift and credit societies. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from …
Is the topic “The Significance of ICT in Effective Teaching and Learning of Integrated Science in JSS” recommended for Integrated Science Project?
Yes it is highly recommended — The study investigates the significance of information and communication technology (ICT) in effective teaching and learning of integrated science in JSS schools in Enugu, North local Government area. In achieving this aim, the following specific objectives were laid out as follows to: examine the ICT facilities adopted in the teaching and learning of integrated science as the junior secondary school level, find out if ICT provides access to teaching aids for teaching and learning of integrated science, find out if ICT provides proper management of large number of students in teaching and learning of integrated science, investigate if ICT promotes independent studies among students in teaching learning of integrated science, and find out if ICT increases students performances in teaching …
Can this topic “Entrepreneurship as a Tool for Sustainable Employment” be used for Entrepreneurship Project?
Yes it can be utilized for research — This research work was carried out to show the importance of Entrepreneurship as a tool for sustainable job creation, a key factor needed to grow every country’s economy especially in sub-Saharan Africa or third world countries. This study analyses entrepreneurship and how it has grown over the years in Nigeria. It also helps to examine factors that can affect entrepreneurship in a country. One hundred and seven (107) questionnaires were administered to gather responses to be analyzed, which is used in testing the hypotheses utilized. With almost a 100 percent response rate, simple percentage method was used for the analysis, chi-square statistical tool was employed to test the hypothesis. Both personal and environmental factors were seen to be important to …
Can this topic “Design and Implementation of a Computerized Transaction Processing and Reporting System for a Modern Supermarket” be used for Computer Science (CS) Project?
Yes it can be utilized for research — Modern supermarket is a day-to-day transaction that is carried out, with adequate reports and feedback on the status of the inventory and account. Transaction processing and report system is always very important to managements of the modern shops. The aim of the study is to design and implement a computerized transaction processing and reporting system for a modern supermarket. In achieving this aim, the following specific objectives were laid out as follows to develop an application software that will provide more effective, easy to use, cost affection accurate and comprehensive in report generation and monitor the activities of transaction processing and reporting system of Eastern shop. The motivation that led to the implementation of the proposed system is that the …
Is the topic “Computer Based Intelligent Traffic Control System” recommended for Computer Science (CS) Project?
Yes it is highly recommended — Intelligent Traffic Control System collect and analyze driving information of vehicles in the area, perform the optimal traffic signal control in accordance with the constantly changing road traffic situation, and provide useful traffic information to drivers based on the data collected. The aim of the study is to Design and Implement an Intelligent Traffic Control System. In achieving this aim, the following specific objectives were laid out to design and develop an application that will: identify, examine, daily signals, monitor problems associated with traffic control on the aforementioned junction, withstand high temperature, wind blow and rainfall, which affect the manual system that does the task, assume the computer screen as the point of traffic light installation where light will be …