AN AUTOMATED SYSTEM FOR CONTROLLING THE TEMPERATURE IN A COLD ROOM
ABSTRACT
The purpose of the study was to design and implement a computerized temperature control system for a cold room.
This work is also designed to monitor and detect any abnormality in the temperature value of any system thereby improving the efficiency and through put of that system.
This piece will go a long way to monitor and control the temperature of any system through incorporated interrupt device.
CHAPTER ONE
The Problem And Its Setting
1.1 Introduction
Feed back control systems exist in nature to a considerable extent. This can be explained with a single human analogy. The simple action of a human being picking up a pencil typically involving two feed back paths which are firstly, visual feed back data enable the current positions of the fingers to be signaled to the optional system and hence to the brain. Temperature Control System
Secondly, having located the pencil, feedback data are transmitted to the brain, via the nervous system to signaled the amount of pressure currently being applied by the finger tips to the pencil. The objective of the human brain is to establish the desired position for the fingers and the desire degrees of fingers pressure to compare these. Desire values with the actual values being transmitted back to the brain, and to use the results of these comparisons to compute an appropriate course of action which will then be implemented, by appropriate body muscles upon receipt of suitable signals from the brain. Temperature Control System
Systems such as this which employ feed back data, are termed closed loop concerned with computer temperature control in which the functions alluded to, so far are implemented by hardware with the function of human operator reduced to the task of establishing desired values of goals.
Whenever, controlled disturbances are applied to a system of whatever, description, in order to improve the performance of the system. then, provided that the performance is monitored and the performance measures are used to determine appropriately the nature of the disturbance, control principles are being used and theory may be applied to analyze and predict the behaviour of the system. because of the rapid evolution of digital computers occurring in over the last few years, much of the electronic hardware used in control systems has become based and the level of intelligence inherent with in the system has escalated. Temperature Control System
1.2 Statement of the problem
Due to the component (Micro chips) used in the design of microcomputers, there is need to control the temperature of the system with breaking down, hence the need for computer temperature controller.
The essence of this computer controller, is that it will regulate the temperature of the computer system and detect any abnormal situation in the system so as to apply appropriate measures.
1.3 The Sub Problem
The sub problem that would be involved in this work-include.
- The detection of abnormal temperature in a cold room: this is done by comparing the set-point of the temperature with some temperature values that will be read into the system.
- Apply appropriate mechanism to control the temperature in a cold room.
- Program the computer to trip off whenever the temperature is above the set point.
1.4 The Hypothesis
At the end of the work it is infected that the desire help to eliminate abnormalities due to temperature increase or decrease in the computer can operate over a long time without breaking down or blowing up. Also with the design the information or data stored into the system will be safeguarded thereby avoiding any damage in the computer files. Temperature Control System
1.5 The Delimitation
The scope of this study covers only computerized temperature regulator of a cold room and emphasis on the level of the temperature the operation of the sensor and time will be simulated.
1.6 Definition Of Terms
Some terms which are used in this work are being defined such as:
Transducer:
A transducer is a device or combination whose response to a mechanical, electrical physical or chemical stimulus is an out signal functionally related in terms of magnitude and sense, to the magnitude and sense of the stimulus. The transducer may often be compose of two principal component in direct contact with the source of the stimulus, and the secondary element, which is that component directly responsible for the generation of the output signal. Temperature Control System
Converter:
A converter is a transducer which converts a signal of the standardize form into a signal of a different standardized form.
Temperature:
The measurement of how or cold a thing is by using thermometer is known as temperature.
Thermometer:
The instrument used to measure the degree of a temperature is called thermometer.
1.6 The Assumptions
It is assumed that the normal input value (set point) which posses through the system is well known to the computer Engineer. This helps Engineer in the system being monitored. The employee is expected to have known or undergone some training on computer population and operation so as to use the design very well. This design will work more effectively if there is an analog 70 digital. Temperature Control System
Converter which will convert the analog signals to its equivalent values. If therefore complies that a transducer converter must be available.
1.7 The organization of the study.
The work is organized in chapters. There are a total of five chapters in this project.
- Chapter one deals with the problem and its setting the sub-problem, hypothesis, delimitation, limitation and assumption are all covered in this chapter. Temperature Control System
- Chapter two covers, literature review as well as the background of the study.
- In chapter three, an overview of the design of the study with their specification is reviewed, the circuit diagram, the simulation program together, with the hardware design and covered in this chapter.
- Chapter four is an analysis of the system already designed both the software analysis and the procedure for implementation are all reviewed.
- Chapter five, contains the summary, conclusion and recommendation of the study. Temperature Control System
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
An Automated System for Controlling the Temperature in a Cold Room can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
TABLE OF CONTENTSPRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "An Automated System for Controlling the Temperature in a Cold Room" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
PRELIMINARY PAGES
- Title page
- Approval page
- Dedication
- Acknowledgement
- Table of Contents
- Abstract
INTRODUCTION
- 1.1 Introduction
- ⋮
LITERATURE REVIEW
- 2.1 Introduction
- ⋮
CHAPTER THREE
SYSTEM ANALYSIS AND DESIGN
- 3.1 Methodology Adopted
- 3.1.1 Problem Identification Using SSADM
- 3.2 Analysis of the Existing System
- 3.2.1 Dataflow of the Existing System
- 3.2.2 Disadvantages Of The Existing System
- 3.2.3 Weakness of the existing System
- 3.3 Feasibility Study
- 3.3.1 Economic Feasibility
- 3.3.2 Technical Feasibility
- 3.3.3 Operational Feasibility
- 3.4 Analysis of the Proposed System
- 3.4.1 Data Flow Diagram of the Proposed System
- 3.4.2 Advantages of the Proposed System
- 3.4.3 Justification of the Proposed System
- 3.5 Functional Requirements
- 3.5.1 Use Case Diagram Of The Admin / User Privileges
- 3.6 Data Requirements
- 3.7 High Level Model of the Proposed System
CHAPTER FOUR
SYSTEM DESIGN AND IMPLEMENTATION
- 4.1 Objectives of the Design
- 4.2 Cohesion and Decomposition High level Model
- 4.3 Control Center / Overall Dataflow Diagram
- 4.3.1 Proposed System Operation Flowchart
- 4.4 System Specification and Design
- 4.4.1 Input and Output Specification
- 4.4.2 Database Specification and Design
- 4.4.3 Data Dictionary
- 4.5 Choice and Justification of Programming Language
- 4.6 Program Documentation
- 4.7 Implementation Techniques
- 4.7.1 System Testing
- 4.8 Programming Module Specification
- 4.8.1 Installation
- 4.9 Computer Hardware Minimum Requirement
- 4.10 Software Requirement
- 4.11 Personnel / User Training
- 4.12 File Maintenance Module
CHAPTER FIVE
SUMMARY, CONCLUSION AND RECOMMENDATION
- 5.1 Introduction
- 5.2 Summary
- 5.3 Conclusion
- 5.4 Recommendation
REFERENCES
APPENDIX A - “SOURCE CODE”
APPENDIX B - “OBJECT PROGRAM”
Disclaimer for Complete Material Utilization
The displayed research work titled "An Automated System for Controlling the Temperature in a Cold Room" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Can the material for “Role of Budgeting and Budgetary Control in a Business Organization” be used as a guide for Economics Project?
Yes it can be used — This research work conducted with special reference to the budgetary system of Emenite Nigeria Limited with the view to ascertain the major role budgets play in the achievement of profitability for an organization. Budget as a profit planning device sets standards of performance of manager, while budgetary control is a tool implored by management to keep track of actual performance to ensure budgeted standards are achieved. In the course of this research work 40 managers were taken as sample population. Data is obtained through personal interview and the administration of questionnaires secondary data source is also implored. Data collected in subject to chi-square test in order to prove or disprove hypothesis therein. The analysis of the finding indicates that Emenite Nigeria …
Can the material for “The Implications of the Implementation of the Treasury Single Account Policy on the Performance of Commercial Banks in Nigeria” be used as a guide for Banking and Finance (BF) Project?
Yes it can be used — The study examined the implications of the implementation of the treasury single account policy on the performance of commercial banks in Nigeria. The study established that TSA is a unified structure of government bank accounts enabling consolidation and judicious management of government cash resources. The sample of the study comprised ten commercial banks in Nigeria namely Skye Bank, United Bank for Africa, Diamond Bank, First Bank, Fidelity Bank, Keystone Bank, Sterling Bank, Zenith Bank, Access Bank and Unity Bank. The data used in the study were computed from the annual financial reports of selected banks. The year 2015 was gauged as the benchmark, since TSA was implemented in that year. The years -2013 and 2014 constituted the pre-TSA period and …
Can this topic “Design and Implementation of Active Chat Detection and Suspicious Chat Detection System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — An active chat is referred to any kind of communication over the Internet that offers a real-time transmission of text messages from sender to receiver. The aim of the study is to Design and Implement a Active Chat Detection and Suspicious Chat Detection System. In achieving this aim, the following specific objectives were laid out to design an Active Chat Detection and Suspicious Chat Detection System, develop a conceptual design for a secure, accessible and user-friendly web based chat application, perform tests on the said system to assure functionality, accessibility and usability of the system and evaluate the existing literature of instant messaging and access the already made Chat Application System and improve on their deficiencies. The motivation that led …
Can the material for “Trade Conflict and Organizational Success” be used as a guide for Business Administration and Management (BAM) Project?
Yes it can be used — Effect of trade conflict on organization success is intended to investigate the productivity in time of conflict and what the implication is on organization success. A population of three hundred was considered for the study and questionnaire were administered to one hundred and fifty five of managerial and non-managerial staff. The questionnaire were referred and analyzed using chi-square and sample percentage method also finding shown that conflict in organization has adverse effect on its survival on the basis of this; it was recommended that expert should be met to educate management on handling on organization conflict. …
Can the material for “An Evaluation of Maritime Logistics as an Emerging Discipline” be used as a guide for Marine Engineering Project?
Yes it can be used — The study was conducted to evaluate the Maritime Logistics as an Emerging Discipline using Warri Port in Delta State as a case study. In achieving this aim, the following specific objectives were laid out to ascertain the role of ports in the context of supply and logistics chains and ascertain whether maritime logistics assess its potential as an emerging discipline. The growth of world container trade during the last decades reflects the coalescent markets in the world. The geographic separation of supply and demand has raised the expectations towards transportation services. Keeping up with the growth of global container traffic was considered as one of the biggest challenges. In addition, customers expect fast and reliable services in a wide geographical …
Can the material for “Design and Implementation of Wireless Local Network in Dorben Polytechnic Abuja” be used as a guide for Computer Science (CS) Project?
Yes it can be used — This project report, design and implementation of wireless local area network in Dorben Polytechnic, Abuja is written to serve as a reference book for wireless LAN in the future whenever it is desired. This report explains the survey consideration, hardware consideration, end-user consideration and principle of wireless network.In addition, IEEE (Institute of Electrical and Electronics Engineers) this professional body have done a lot of work to make wireless network had numerous option to choice a suitable wireless router 802.11 (a, b, g, n etc.) …
Can this topic “Knowledge of Breast Cancer among Female Teachers in Selected Primary School” be used for Midwifery Project?
Yes it can be utilized for research — Breast cancer is a disease that involves the patient, family, and community, and wastes many financial and spiritual resources. The study scrutinized the Knowledge of Breast Cancer among Female Teachers in Selected Primary School. In achieving this aim, the following specific objectives were laid out to evaluate the impact of media breast cancer awareness campaign on the health behaviour of Female Teachers and ascertain if the media campaign established a high level of awareness among Female Teachers in Selected Primary School. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 133 (one hundred and thirty three) respondents were selected for this study to represent …
Can this topic “Design and Implementation of an Online Airline Reservation Information System” be used for Computer Science (CS) Project?
Yes it can be utilized for research — An Airline Reservation Information System is a computerized system used to store and retrieve information and conduct transactions related to travel. The aim of the study is to Design and Implement an Online Airline Reservation Information System. In achieving this aim, the following specific objectives were laid out as follows to design and develop an application software that will minimize cost of maintenance instead of spending more money in purchasing of new equipment and increase output of passenger manifest with the interconnection more than one computer system over network. The motivation that led to the implementation of the proposed system is as a result of inefficiency will be notified and new system design implemented. With references to the rapid growth …
Can the material for “The Design and Fabrication of a Electrical Centrifuge” be used as a guide for Science Laboratory Technology (SLT) Project?
Yes it can be used — An Electrical Centrifuge is a piece of equipment generally driven by an electric motor and some older ones usually spun with hand, that puts an object in a rotation around a fixed axis, applying a force perpendicular to the axis. The study was conducted to design and fabricate an Electrical Centrifuge using local materials. It spun liquid samples at a high speeds and thus creates a strong centripetal force causing the denser materials to travel towards the bottom of the centrifuge tube more rapidly that they would under the force of normal gravity. The present high cost of imported centrifuges necessitates the design and construction of An Electrical Centrifuge using local raw materials. The use of steel for the construction of …
Can this topic “Assessment of Public Involvement in Rural Community Transformation Through Implementation of Infrastructural Projects” be used for Geography Project?
Yes it can be utilized for research — The study was carried out to assess the Public Involvement in Rural Community Transformation through Implementation of Infrastructural Projects using Abiriba in Ohafia Local Government Area of Abia state as a case study. Investigation revealed that development has been an incessant act in recent years yet most rural areas are been left out with little or no development. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 300 (three hundred) respondents were selected for this study to represent the entire population of the study. Primary data were collected from the primary source which questionnaire was used as an instrument of data collection while secondary …