A MATHEMATICAL MODEL FOR PREDICTION OF THE STRENGTH OF SANCRETE CEMENT BLOCK
ABSTRACT
Sandcrete blocks are prismatic units manufactured from lean (sand-cement) mortar mixes and are the predominant walling materials used in buildings in Nigeria and other countries. Although the blocks are preferred to other similar walling material such as bricks and concrete blocks due to the availability of the dominant material (sand) in the country and the ease of manufacture, the material is known to have several drawbacks: it has a low compressive strength which could be a factor for structural failure in buildings. Apart from the compressive strength, little is known about the other strength and permeation properties of the material.
Thirdly, little research has been conducted into the influence of water-cement ratio which is known to wield a strong influence on the strength and permeation properties of cementitious materials. On the basis of a thorough review of the literature, a detailed experimental programme was designed and carried out in Nigeria on the factors that influence the strength and permeation properties of the material using over 10 destructive test methods. Over 1500 sandcrete blocks were moulded and tested. The literature review also indicated that lack of quality control in the Nigeria sandcrete blocks manufacturing industry which accounts for the poor quality of the material in the country. The results of the experimental programme indicate that with the right constituent materials, manufacturing and curing processes, it is possible to improve the compressive strength of sandcrete blocks to over 7.0N/mm2 (the minimum specfied by the British Standards) with a lean mix of 1:12 cement/sand ratio.
The compressive strength of the material was found to have a strong relationship with other strength properties of the material and could therefore be used as the main criterion for determining its quality. The inclusion of quarry dust and coarse aggregate (sharp sand) significantly improved the strength and permeation properties of the blocks. Compared with normal concrete, sandcrete; was found to have a relatively high permeability. Through this study, a data base on several strength and permeation properties has been developed which can assist engineers to estimate these properties. Finally recommendations were made on ways of improving the quality of sandcrete blocks in the country.
CHAPTER ONE
Introduction
1.1. Research Background
Sandcrete blocks are produced from a lean mix of Portland cement, natural sand and water and are the main masonry unit used in the urban and peri-urban areas of Nigeria, West Africa and many parts of the developing world. Unlike other masonry units such as concrete blocks and burn bricks which are used in other civil engineering infrastructure, they are predominantly used as walling units in the construction of shelter: both as external cladding and for partitions. They have an appeal to the construction industry due mainly to its ease of manufacture and the widespread availability of the main constituent material (sand).
A number of studies including the project National de Recherche/Development (Sablocrete) (1994) carried out in France have designated sandcrete as a member of a family of concretes, which can be used when environmental and economic constrictions restrict the use of coarse aggregate. This project carried out in France (Sablocrete) revealed the economical and mechanical advantages of this material and showed typical applications in public works and building.
In researching into the properties of sandcrete blocks as defined by this study, one is faced with a delimma, little material exists in the technical literature on certain properties of sandcrete blocks such as its durability, tensile, transverse and flexural strength and the value of elastic constants. One way of overcoming this problem is to compare sandcrete with some of its closest relatives such as concrete and mortar. In fact as a material, sandcrete can be considered as a form of zero-slump concrete or mortar. This three materials share many common characteristics even though their properties diverge at a point. For this reason, extensive references are made in this study to concrete and mortar.
Sandcrete blocks are mostly produced in Nigeria by the small scale manufacturers who as business people have profit as their main motive and therefore often use sub-standard materials and improper procedures in the production of the blocks. This results in the output of poor quality blocks with poor strength properties. Whereas Nigerian burnt bricks are reported to have compressive strength in the range of 11.5N/mm2 to 26.0N/mm2, the corresponding range for sandcrete blocks was only found to be 1.45M/mm2 to 3.5N/mm2 (Graham, 1990; Danso, 1994). This problem tends to limit the application of the material and could also be a major factor in relation to the structural failure of buildings in the event of earthquakes.
As mentioned above, apart from the compressive strength of the unit, very little is known about the other properties of the block such as the Young's Modulus, tensile, flexural and transverse strengths which are required by structural engineers and other scientists for design computations. The lack of information on these strength properties of sandcrete blocks leaves room for much speculation and approximation, which could be detrimental to the design of structures.
Virtually all the numerous research and publications on the material seem to focus on the strength properties of the material. Very little exist in literature on the durability of sandcrete blocks. In recent years however, reports from around the globe indicate that the premature deterioration of concrete and other cementitious materials is a major problem. For instance it has been reported that significant proportions of national budgets have been expended on the maintenance of concrete structures in the US and Europe. Thus the philosophy that a strong concrete is a durable concrete has failed as this is not always the case. It can therefore be argued that to avoid huge maintenance costs of structures constructed from concrete and for that matter sandcrete blocks, the basic masonry units must be durable as well as strong.
Closely linked with permeation (durability) and strength properties of cementitious materials is the water-cement ratio. Most researchers agree that water cement ratio has a profound impact on the durability and strength of these materials but few researchers of sandcrete blocks have examined the effect of water-cement ratio on the properties of the blocks.
CHAPTER TWO
2.0 Literature Review
2.1 Introduction
The review of relevant literature is the main topic of this chapter. A literature review covers theoretical and methodological contributions to a certain issue in addition to the state of knowledge at the time of writing. It provides information about the state of the art in relation to the subject you are writing about. It examines the body of work on the chosen subject. The literature evaluation in this study comprises the …
Procedure for Downloading the PDF (Docx) Material
A Mathematical Model for Prediction of the Strength of Sancrete Cement Block (Application of Henry Scheffe’s and Osadebe’s Concrete Optimisation theory) can be downloaded by requesting the full set of materials at the project or seminar cost. The document will be sent via Microsoft Word (MS-Word) format via WhatsApp (e-mail) following payment confirmation.
| Seminar Material Cost ₦3,000 | Project Material Cost ₦5,000 |
Request Complete Material
 | Click here to request the Complete Material via WhatsApp including;
|
Disclaimer for Complete Material Utilization
The displayed research work titled "A Mathematical Model for Prediction of the Strength of Sancrete Cement Block" is stated as a research guideline towards accomplishing your assigned project / seminar research work. All the research materials on this website are ONLY for research purposes and should be used as a guideline in developing your research work. For no reason should you copy word for word as projectlist.com.ng will not be liable for any who copied the material. By ordering the complete research guideline, it signifies that you've accepted our terms of service.
Frequently Asked Questions (FAQ)
Is the topic “Causes and Effects of Domestic Violence in Nigeria” recommended for Education Project?
Yes it is highly recommended — The study was conducted to identify the Causes and Effects of Domestic Violence in Nigeria. Investigation revealed that the incidence of domestic violence against women in the family is a regularly occurring phenomenon. Violence or at least the fear of violence is a part of every woman’s life. Each woman knows someone who has been the victim of a violent involved at one time or another. The research design used in this report is descriptive design, utilizing questionnaire method to obtain information from the respondents for this project. A total of 100 (one hundred) respondents were selected for this study to represent the entire population of the study. For null hypotheses were formulated and tested using the one-way ANOVA and …
Can this topic “Impact of Group Dynamics in Work Organization in the Food and Beverage Industry” be used for Industrial Relations and Personnel Management (IRPM) Project?
Yes it can be utilized for research — The study examines the impact of Group Dynamics in Work Organisation in the Food and Beverage Industry, with special reference to Nestle Nigeria plc. To achieving this, related literature was cited on Group dynamics. Descriptive research design approach was employed for the research design and a simple random sampling technique was used in selection of respondents. A sample of 50 respondents was selected from the population study. Fifty (50) questionnaires were administered to the staff of Nestle Nigeria Plc. The research instrument used are the questionnaire, frequency distribution; percentage and chi-square were methods of data analysis used for the study. It is however shown from the study that: Group Dynamics exists within work organization, also Group Dynamics has a significant impact on organizational performance. Recommendations were …
Is the topic “Lecturers’ Perception of the Impact of E-Learning in Teacher Education” recommended for Teacher Education Project?
Yes it is highly recommended — This research investigated the lectures’ perception of the impact of e-learning in teacher education. The instrument used for the research work was a questionnaire. Two hundred and fifty five (255) lecturers were selected as the sample of this study from six Higher Institutions Lagos State Polytechnic, Redeemers’ University, Lagos State University, Federal College of Education (Technical), University of Lagos. The faculties of Sciences and Education of each institution were chosen as the sample of the study. Three (3) research questions were formulated, and the data collected were analyzed using simple percentages, Arithmetic mean and standard deviation statistical tool. The results of the study revealed that majority of the lecturers are favorably disposed to the use of e-learning in teacher education. Results …
Can the material for “Impact of Information Communication Technology in the Dissemination of Information in Special Libraries” be used as a guide for Library and Information Science (LIS) Project?
Yes it can be used — Information communication technology (ICT) and dissemination of information are well known for delivering prompt and up-to-date information services to the library users. The aim of the study is to scrutinize the Impact of Information Communication Technology in the Dissemination of Information in Special Libraries. In achieving this aim, the following specific objectives were laid out to examines the use of ICT by special libraries in Nigeria in the dissemination of information in the educational system, reveal both the levels of information and communication technologies and plans for the future and assess the contribution of ICT in providing information dissemination to Nigerians through libraries especially those that are specialized in operation and structure in areas such as education and research, trade …
Can the material for “The Effect of Exchange Rate Fluctuation on the Nigeria Manufacturing Sector” be used as a guide for Accountancy / Accounting Project?
Yes it can be used — This paper examines the effect of exchange rate fluctuations on the Nigerian manufacturing sector during a twenty five (25) years period (1986 – 2010). The argument is that fluctuation in exchange rate adversely affects output of manufacturing sector. This is because Nigerian manufacturing is highly dependent on import of input and capital goods. The methodology adopted for this study is empirical. The econometric tool of regression was used for the analysis. The population target of this study is the total number of 25 years from (1986 – 2010) (25) annual time series as data relating to other years after 2010 are not available. The used in this study is the secondary source of data. The data to be utilized in …
Is the topic “The Role of Agricultural Extension Worker in Educating Farmers in Plantain Production in Selected Local Government Areas” recommended for Agricultural Business Project?
Yes it is highly recommended — The study examined the role of extension workers in educating farmers and constraints farmers face in plantain production in some selected areas in Edo State, Nigeria. A total of 120 Plantain farmers were randomly selected from the study area. Farmers were interviewed using well structured questionnaire. Simple descriptive statistics and multiple regression were used to analysis the data collected. The likert scale techniques was used to identify the constraints faced by the farmers, the result revealed that 68.3 percent of the farmers were male while 31.7 percent were female, then 33.2 percent of the farmers with above 61 years of age, also 85.8 percent of the farmers have farm size ranging from 5 to 10 hectare. 52.5 percent of the …
Can the material for “Design and Implementation of Mobile Application for Electronic Voting for SUG” be used as a guide for Computer Science (CS) Project?
Yes it can be used — Electronic voting refers to the option of using electronic means to vote in referendums and elections. E-Voting is an election system that allows a voter to record his or her secure and secret ballot electronically. The inefficiency of voting process in Federal Polytechnic Nekede has resulted in a lot of problems. These problems have continued to obstruct the peace of democracy in Student Union Government (SUG) in Federal Polytechnic Nekede because the choice of a capable candidate is not encouraged by the current system. The aim of the study is to Design and Implement a Mobile Application for Electronic Voting for Student Union Government (SUG) using Federal Polytechnic Nekede as a case study. In achieving this aim, the following specific …
Is the topic “Economic Analysis of Soil Conservation Practices Among Crop Farmers” recommended for Agricultural Economics and Extension Project?
Yes it is highly recommended — Soil conservation refers to the use of measures to protect the soil, the aim of maintaining or improving its natural fertility. The study was carried out to analyze the Soil Conservation Practices among Crop Farmers. In achieving this aim, the following specific objectives were laid out to identify the methods/technologies used in combating soil degradation and estimate the costs and benefits of selected methods of conserving the soil in the area under study. Investigation revealed that one of the most serious problems of land-management is soil erosion. Soil erosion constitutes one of the greatest environmental and productivity problems, causing an estimated 30 million tonnes of soil loss annually. The research design used in this report is descriptive design, utilizing questionnaire …
Can this topic “Evaluation of Management by Objective and Its Applications in Financial Institutions in Nigeria” be used for Business Administration and Management (BAM) Project?
Yes it can be utilized for research — This research was undertaken to evaluate the extent of application of management by objective programme in the operations of financial institutions in Nigerian – A case study of union Bank of Nigeria Plc. New market road Onitsha. Motivated by the low productivity and poor job attitudes of staff of the study area caused by the job – centred approach (management style) and personality trait appraisal system highly favoured by most of the managers, the research focused on how the effective implementation of management by objectives programmes in union Bank can reverse the trend for better performance, job satisfaction and self actualization. In the course of the study five major research question were formulated to guide the study. Data were collected by means …
Can the material for “Design and Implementation of Production Control System” be used as a guide for Computer Science (CS) Project?
Yes it can be used — The production control system is an application system that carries out the function of management which plans, directs and controls the material supply and processing activities of an enterprise so that specified products are produced by specified methods to meet an approved sales programme. The aim of the study is to Design and Implement of Production Control System. In achieving this aim, the following specific objectives were laid out as follows to design and implement a Production Control System that will provide a system that will reduce the over head in maintaining independent date fills with its associated redundancy and integrity problems and Monitors and control the activity of various parties to provide timely information that bears on meeting schedule. The …